控制电路

  • 网络MCU;Control Circuit;Control;Controller;controlcircuit
控制电路控制电路
  1. CO2激光热处理工作台控制电路

    A control circuit of the work-bench for CO_2 laser heat treatment

  2. 基于FPGA的高频链逆变器控制电路的设计

    Application of FPGA in the Control Circuit of High-frequency Link Inverter

  3. 实验装置采用以数字信号处理器(DSP)为核心的控制电路实现实时运算与控制。

    Experimental equipment controlled by DSP achieves realtime calculation and control .

  4. LED数字显示和控制电路

    Digital display of LED and control circuit

  5. PLC在门座式起重机控制电路中的应用

    The application of PLC in the hoist control circuit

  6. PLC在多台电动机降压起动、反接制动及正反转可逆控制电路中的应用

    ANALYSIS ON REVERSIBLE ROTATION SHADED MOTOR Application of PLC in the Circuit of Multiple Motor System

  7. RC型音调控制电路在高传真扩音机中的应用

    The application of type RC tone control circuit to the Hi-Fi amplifier

  8. PLC在运料机械手控制电路改造中的应用

    PLC Used for Manipulator Control

  9. 基于FPGA的高速并行A/D采样控制电路的设计

    The Design of the A / D Sampling Control Circuit Basing on the High Speed Simultaneous FPGA

  10. 控制电路包括采样电路、送丝电路和PWM控制电路等。

    The control circuit involves the sampling circuit , PWM control circuit and wire circuit .

  11. 辅助信号发生器(简称AC)就是离子阱质谱众多控制电路中的一部分。

    Auxiliary signal generator ( AC ) is a part of many control circuit of ion trap mass spectrograph .

  12. 最后,本文设计了双PWM变频调速系统装置,包括主电路、控制电路,采样电路等。

    The system design includes main circuit , control circuit , sampling circuit and so on .

  13. 本控制电路还可控制彩色EL显示器实现彩色显示。

    The controller can also achieve color display with color EL display .

  14. 采用VHDL语言描述FPGA的规划并实现硬件控制电路板的各模块功能。

    We use VHDL language to describe planning of FPGA and realize functions of each module .

  15. EDA在逆变电源控制电路上的应用

    Application on Controlling Circuit of Inverting Power with EDA

  16. 电路采用了三管动态存储单元和带缓冲的I/O单元,并针对Y-C分离算法的要求对控制电路进行优化。

    Three transistor dynamic cells and buffered I / O control logic are used for the device . The control circuit is optimized for Y C separation system .

  17. 本文主要论述了CMOS图像传感器时序控制电路的系统设计和实现方法。

    The system design and implementation methods of timing control circuit for a new CMOS image sensor are proposed .

  18. 拼接式大屏幕PDP接口控制电路研制

    Implement of Interface and Controlling Circuit for Title Screen PDP

  19. 手持端放音系统由微控制器、语音输出通道、Flash存储器以及控制电路等部分构成。

    The hand play system is made up of MCU , the channel for speech out , flash memory and control circuit .

  20. 开关电源输出隔离的电源分别给IPM的驱动电路、DSP控制电路、传感器以及冷却风扇供电。

    The switching power supplied insolated DC power to IPM , DSP control circuits , sensor and cooling fans .

  21. 用EPROM和GAL设计SPWM逆变控制电路

    Using EPROM and GAL to design SPWM inverter control circuit

  22. CMOS图像传感器是一种把像素感光阵列、放大器和模数转换等模拟功能模块及时序控制电路集成在一起的芯片系统。

    CMOS image sensor is a chip system , which integrated pixel array , amplifiers , ADC and timing controlling circuits .

  23. 基于PSpice仿真的SLD控制电路降额设计

    Derating design for controlling circuit of SLD based on PSpice simulation

  24. 嵌入式系统中EEPROM接口及控制电路设计

    Design of Interface and Control Circuit of EEPROM in Embedded System

  25. 微电子机械系统(MicroElectroMechanicalSystems,简称MEMS)是由微传感器、微执行器、信号处理和控制电路、通讯接口和电源等部件组成的一体化的微型器件系统。

    Micro Electro Mechanical systems ( MEMS ) are integrative micro-device systems that consist of micro-sensor , micro-actuator , controlling and signal processing circuit , communication interface and electrical source .

  26. 高速IPM模块的保护功能及驱动控制电路研究

    A Study of the Protective Function and Driving Circuit of the High Speed IPM Power Modules

  27. 第三章介绍了基于FPGA的零空闲计数器及逻辑控制电路设计,利用高速的FPGA实现了由一组计数器和锁存器完成连续计数,以及对微小误差脉冲的采样。

    Chapter 3 expatiates the design of ZDT counter and the logic control circuit , through which continuous count with one set of counter is realized implemented in FPGA .

  28. 丰田PREVIA发动机电动汽油泵控制电路的故障诊断与排除

    Diagnosing and fixing of breakdown in control circuit of gasoline pump for Toyota'PREVIA engine

  29. 重点研究了自动增益控制电路(AGC)的工作原理,并利用ADS软件设计出可变增益中频放大器。

    The paper focused on the basic theory of Automatic gain control ( AGC ) and used ADS software to design variable gain amplifier .

  30. 采用以PLC软件取代硬件逻辑控制电路,对东洋电梯给定速度曲线控制方式进行技术改造。

    The technical modification of the control method for the given velocity curve of Dongyang elevator has been successfully carried out by using the PLC software to replace hardware logical control circuits .