控制冷却

热轧H型钢控制冷却工艺研究

Research on controlled cooling technology for hot rolled H-beam

利用自主研制的试验装置，进行了H型钢控制冷却试验研究。

Experimental study on controlled cooling technology for hot-rolled H-beam is made using self-developed experimental device .

H型钢轧后控制冷却的研究与应用

Study and Application of Cooling Control After H-Beam Rolling

热轧H型钢控制冷却系统自动控制的实现

The Controlled-Cooling System of the H-beam Hot Mill

APF型发动机电子控制冷却系统

APF Type Electronically Controlled Engine Cooling System

快速控制冷却（ACC）系统在济钢中厚板的改进与应用

Improvement and Application of the Accelerated Controlled Cooling System in Jigang 's Heavy Plate Production

结果表明：在轧后控制冷却过程中，若冷却水集中从H型钢腿部外侧对其腰腿接合处进行快速冷却可获得较均匀的温度分布。

It is found that the more uniform temperature distribution could be acquired by strengthening the cooling in the fillet part of the H-beam in the controlled cooling process .

测定了控制冷却SiMn贝氏体/马氏体耐磨铸钢的过冷奥氏体等温转变曲线，并以此为依据，对这种钢的等温淬火工艺及性能进行了研究。

By determining the T T T curve and studying the isothermal quenching process of the controlled cooling Si Mn bainite martensite wear resisting cast steel , we have get some useful conclusions .

高速线材82B控制冷却线的数学模型和应用

Mathematical Modeling and Application of Controlled Cooling Line of High-Speed Rolling Rod 82B

Si-Mn合金弹簧钢带控轧控冷工艺研究盘条轧制控制冷却法

Research on the Controlled Rolling and Controlled Cooling Technology for Si-Mn Alloy Spring Steel Strip stelmor process

16Mn钢轧后控制冷却的贝氏体组织与性能

The Bainite Microstructures and Properties of 16 + Mn Steel by Controlled Rolling and Cooling Processes

其直接加热、大压下量轧制、机架间控制冷却和冷床上的控制冷却技术使得热轧带钢的力学性能与传统的热轧带钢（CCR）相比有明显的优越性。

The process methods of direct heating , large reduction rolling and cooling between stands and in the cooling bed give hot-rolled strip superior mechanical properties compared with traditional process .

本文作者研究了45钢的奥氏体（锻后的或重新加热的）通过控制冷却技术，使其碳化物粒化，得到Ps型的调质或球化组织。

Studies on carbides granulation in austenite ( forged or reheated ) of 45 steel through the technology of controlling cooling is carried out , and the refining or spheroidal structure of the spheroidal pearlite ( Ps ) is obtained .

82A钢高速线材控制冷却工艺的优化

Optimization for Control-Cooling Process of High Speed Rolled Wire of Steel 82A

3BF控制冷却壁热负荷的实践

Practice of Heat Load Control for 3 BF Cooling Stave

D.S.C控制冷却系统的应用分析

Application of D.S.C Control System for High-speed Wire Rod

对轧后Q235角钢的自然冷却和不同方案下的控制冷却技术进行了计算机模拟。检测波长：235nm；

The natural and controlled cooling technologies for Q ( 235 ) rolled angle steel have been simulated by computer . The detector was set at UV 235 nm .

在实验室用真空感应炉冶炼复相钢和马氏体钢，锻坯、控轧成3mm厚的板材后采用不同冷却模式进行控制冷却。研究了成分、冷却工艺对组织与力学性能的影响。

The effect of chemical composition and cooling process on microstructure and mechanical properties of specimens taken from the controlled rolled and cooled strips of vacuum melted multiphase and martensite steels were researched .

控轧后在线控制冷却对低碳C-Mn-Mo-Nb钢板性能和组织的影响

The effect of on-line controlled cooling after controlled rolling on the properties and structure of low carbon c-mn-mo-nb steel sheet

控制冷却技术是生产高质量钢板的有效手段，为满足首钢3500mm中厚板轧机轧后控制冷却设备和工艺的控制要求，采用了基于西门子S7-400PLC的控制冷却基础自动化系统。

Controlled cooling is an efficient method for product improvement in modern plate production . To meet the control system requirements of the cooling control technical equipment in the 3 500 mm Plate Mill in Shougang Group , a basic automatic system based on Siemens S7-400 PLC is adopted .

线材高速轧后的控制冷却技术

Technology of cooling control on the high-speed wire after rolling procedure

鞍钢厚板厂控制冷却装置的改造方案

Revamping Plan of Control Cooling Device in AISC Heavy Plate Mill

螺纹钢筋控制冷却工艺研究及优化

Study and Optimizing on the Control Cooling Technique of Steel Rebar

钢筋自动控制冷却系统和工艺效果

An automatic control cooling system for reinforced bars and its technological effects

浅谈控制冷却技术在低碳钢轧制上的应用

Discussion on the applying controlling cooling technology to rolling low carbon steel

控制冷却技术在调质工艺中的应用

Application of the Controlled Cooling Technology to the Hardening and Tempering Processes

奥氏体-贝氏体耐磨钢控制冷却热处理试验研究

Study on the Controlled Cooling Process of Wear-resistant Austenite-Bainite Steel

提高中厚板控制冷却精度的策略

Strategies of precision improvement of controlled cooling for medium plate

控制冷却参数对普碳钢组织性能的影响

Influence of controlled cooling process on microstructure and mechanical properties of plate

钢筋控制冷却装备的工艺技术设计与计算

Technological design and calculation of a controlled cooling equipment for reinforcing bars