机械特性

jī xiè tè xìnɡ
  • mechanical properties;mechanical characteristic
机械特性机械特性
  1. 基于ARM和FPGA的高压开关机械特性测试系统

    Testing System for Mechanical Characteristic of High Voltage Switch Based on FPGA And ARM

  2. 基于DSP及ARM的分布式高压断路器机械特性监测系统

    Distributed monitoring system based on DSP and ARM for mechanical characteristic of high voltage breaker

  3. 基于ARM与Linux的真空断路器机械特性测试仪的设计与实现

    Design and Realization of a Mechanical Characteristics Tester for Vacuum Circuit Breaker Based on ARM and Linux

  4. SR电机的自然机械特性

    Natural mechanical properties of SR electric motor

  5. 由磁场能量推导出SR电机的自然机械特性方程式。

    And the equation of natural mechanical properties of SR motor is deducted from magnetic field energy .

  6. 表面波方法表征纳米多孔SiO2薄膜机械特性的对准技术

    Alignment Technique Used in the SAW Method for Characterizing the Mechanical Property of the Nano-Porous SiO_2

  7. 根据机械特性、电磁特性和电气特性等其它现实因素进行合理的PCB布局布线设计。

    PCB layout and routing is rationally designed according to mechanical properties , electromagnetic characteristics , electrical characteristics and other realistic factors .

  8. 为提高微机电系统(Micro-Electro-MechanicalSystems,MEMS)产品的可靠性和稳定性,推进其产业化进程,对MEMS微结构动态机械特性进行测试具有非常重要的意义。

    It is very important to measure and test dynamics of microstructures in order to develop reliable and marketable Micro-Electro-Mechanical Systems ( MEMS ) products .

  9. 在分析负载的机械特性、步进电动机的矩频特性、系统的运动方程式的基础上,建立频率控制方程,并运用MATLAB软件绘制控制曲线。

    Frequency control equation is established based on the analysis of load mechanical characteristic , stepper motor torque-frequency characteristic , systemic motion equation . Frequency control curve is drawn by MATLAB software .

  10. 键合工艺参数对SDB片界面机械特性的影响

    The Effects of Bonding Technology Parameter on Mechanical Property of the SDB Wafer Boundary

  11. 应用CFD软件模拟Ф115mm涡轮钻具机械特性

    CFD simulation of mechanical performance of turbodrill with diameter of 115 minimeter

  12. 表征ULSI低介电常数互连材料机械特性的表面波频散特性

    Dispersive Characteristics of Surface Acoustic Waves for Measuring Mechanical Properties of Low-k Dielectrics Used in ULSI

  13. 文章的第四章介绍了通孔的机械特性以及通孔的寄生电容和寄生电感,并用准静态法对via结构的过剩电感进行了计算。

    The mechanical property , the parasitical capacitance and the parasitical inductance of the via structure were introduced in the fourth chapter , and the excess inductance of the via structure was computed by using quasi-electrostatic method .

  14. PVPP能够改善复合水凝胶的机械特性和热稳定性。

    PVPP could improve the mechanical properties and thermal stability of the composite hydrogels .

  15. 根据机械特性方程式提出SR电机两种基本调速方法,即调节相绕组的通电角和调节相绕组的平均电压。

    And two basic methods for regulating motor speed are proposed based on this equation . That is to adjust the energizing angle and the average voltage of phase winding .

  16. 机械特性聚醚醚酮PEEK具有刚性和柔性,特别是对交变应力下的抗疲劳性非常突出,可与合金材料相媲美。

    Mechanical properties PEEK PEEK has rigid and flexible , especially for alternating stress of fatigue resistance is very outstanding , but and alloy material comparable .

  17. 用灰色系统理论的GM(1,5)模型建立了苹果品质多因子动态变化的数学模型,可确定苹果理化特性的各项指标对机械特性指标的影响与作用;

    The mathematical model for multifactor dynamic changes of apple quality , which can determine the effects of various physicochemical property indexes on mechanical property ones , was established by using GM ( 1,5 ) .

  18. 因此需要发展快速、准确、无损的检测手段来表征ULSI互连薄膜的机械特性。

    Hence , fast , accurate and non-destructive technique should be developed to characterize the mechanical properties of ULSI interconnect films .

  19. 利用DSI测井资料可以获取地层的纵、横波资料,进行岩石机械特性参数计算,依据岩石力学原理,可计算地应力及预测地层破裂压力。

    Make use of the logging data , we can calculate the in-situ stress and predict the formation fracture pressure .

  20. 根据分析结果设计制作了气动驱动器。最后,通过气动驱动器的机械特性实验、Matlab仿真及Ansys有限元仿真实验,对其机械特性进行了实验研究。

    According to the result of the analysis , pneumatic actuator was designed and made . Finally , experimental research on mechanical properties of the pneumatic actuator by mechanical properties experiment , Matlab and Ansys simulation was conducted .

  21. 本文综述了CMC智能型软起动起为了改善电机的机械特性而设置的各种控制模式和功能,及其相应的故障处理。

    This paper introduced CMC Intelligent soft starter all control model for improving the mechanical characteristics of moter and it 's interrelated function , And how to deal with the malfunction .

  22. 从复合材的界面力学特性及其动态热机械特性(DMA)两个方面,研究了以聚苯乙烯泡末塑料与木材碎料为原料的木材-聚苯乙烯复合材中木材与聚苯乙烯的复合机理。

    The composite mechanisms of wood-polystyrene composite , made of wood particle and discarded foamed polystyrene ( PS ), was researched by 2 ways of interface characteristic of composite and dynamic mechanical analysis ( DMA ) .

  23. 测量小功率异步电动机的M-S曲线时,磁粉测功机是作负载用,其机械特性要求类似于风机特性。

    When the M-S curve of a low power asynchronous motor was measured , the powder dynamometer acted as a load , and its mechanical characteristics were required like a blower .

  24. 超磁致伸缩薄膜致动器磁&机械特性研究

    Study of Mechanical and Magnetic Characteristic for Magnetostrictive Thin Film Actuator

  25. 电励磁双凸极电机的机械特性研究

    Research of Mechanical Characteristics for Doubly Salient Electro - magnetic Motor

  26. 高压断路器机械特性检测系统硬件设计

    Hardware Design of Physical Characteristics Examination System for High-pressured Circuit Breaker

  27. 岩石机械特性在油田工程中具有特别重要的作用。

    Rock mechanical properties play an important role in oilfield engineering .

  28. 用涡流测功机测取异步电动机的机械特性

    Measurement for Mechanical Characteristics of Asynchronous Motors Using Eddy Current Dynamometer

  29. 第一部分是活塞组机械特性的研究。

    The first part investigates the mechanical characteristics of piston group .

  30. 适用于新标准的断路器机械特性测试装置

    Circuit-breaker Mechanical Characteristics Test Device Conforming to the New GB Standard