喷雾干燥塔

喷雾干燥塔的节能方法

Energy-saving of Spray Dryer

应用结果表明：采用新型的旋流式压力喷雾干燥塔的体积蒸发强度可达12kgH2O／m~3·h，能源利用率可达60%，既提高了产品的质量和产量，又降低了设备投资和土建规模。

The preliminary results obtained from the industrial production showed that the volumetric evaporation intensity and energy consumption efficiency would be up to 12kgH2O / m3 . h and 60 % respectively to use the combined spin-flow pressure spray dryer .

CWS-I系列水煤浆燃烧器及其在陶瓷喷雾干燥塔上的应用

CWS-I Coal-Water Slurry Burner Series and Their Applications in Spraying Dryer of Ceramics

介绍了喷雾干燥塔在PVC树脂生产中产生黏壁的原因，并从喷雾干燥塔喷嘴的安装，操作风量以及温度等方面提出了改进方法，取得了良好的效果。

Production reason of wall sticking in production of PVC resin in spray drying tower was introduction . The improving method was put forward from several aspects . For example , the fixing of jet of spray drying tower , operation quantity of air and temperature .

滤液在喷雾干燥塔430℃的入口温度下喷雾热分解，再经过400℃下的流化床处理9min，可得到含量为99.5%（质量分数）高活性的氧化锌。

Then the filtrate was injected into a spray drying tower at entrance temperature 430 ℃ . The obtained powder was heated at 400 ℃ in a fluidized bed for 9 min. The active zinc oxide was obtained with a purity of ( 99.5 % . )

变频器在喷雾干燥塔控制系统中的应用

Frequency converter Application in control system of mist spray drier tower

本文通过气流分布器设计方法的应用探讨，来指导喷雾干燥塔的设计和改造。

Design methods for the air distributor was discussed in this paper .

计算喷雾干燥塔直径和高度的解析法

Analytical method for calculating diameter and height of spray dryer

喷雾干燥塔粉料水份的自动控制

Automatic Control of Powder Lot Humidity for Spary Dryer Tower

喷雾干燥塔进风过滤装置的设计及注意事项

Design of Inlet Filter in Spraying Drying Tower and Notice

喷雾干燥塔黏壁原因的分析及探讨

Analysis on reasons of wall sticking of spray drying tower

动态矩阵控制在喷雾干燥塔中的应用研究

Application of Dynamic Matrix Control in Spray Drying Tower

喷雾干燥塔气流分布器设计及其对催化剂干燥的影响

Design of air distributor for spray drier and its influence on catalyst drying

陶瓷工业喷雾干燥塔节能技术工程应用与经济性分析

Energy-saving technologies Engineering Applications and economic analysis of spray dryer in ceramic industry

并流喷雾干燥塔的计算机辅助设计研究

Study on the computer-aided design of cocurrent spray dryer

喷雾干燥塔结构对产品收率的影响

The influence of spray dry tower ′ s structure on the yield of product

喷雾干燥塔天桥的改造

Transformation of Moving Platform within Spray Drier

逆流喷雾干燥塔设计的探讨

Discussion on Design of Countercurrent Spray Dryer

喷雾干燥塔模糊控制模型及仿真

The spray-dryer fuzzy control model and simulation

喷雾干燥塔计算机控制系统

Spray drying Plant Computer Control

喷雾干燥塔的计算

Calculation of spray dryer

喷雾干燥塔排风温度高的原因及解决方法

Why is high the temperature in spray-dry tower at the time of ventilating-out and how to avoid it

5000t/a大豆分离蛋白喷雾干燥塔的设计及结构

Design and structure of spray drying tower with the capacity of 5000 t / a soybean protein isolate

喷雾干燥塔粉料湿含量控制系统的分析、设计与调试

The Analysis , Design and Debugging of the Moisture Content Controlling System of the Corned-Powder in the Spray-drying Tower

介绍用于立式压力喷雾干燥塔的热风分配器改造后的结构与工作原理。

This work describes the construction and work principle of the hot air distributor for vertical pressure spraying dry tower .

文中对喷雾干燥塔排风温度高的原因进行了分析，提出了解决方法。

Now , I want to analyse the causes of it and try to give the way to resolve it .

因此，对逆流喷雾干燥塔中雾滴运动微分方程的积分方法和雾滴运动阻力系数的计算方法进行了改进。

The modifications to integral method of fogdrop moving differential equation and calculation method of fogdrop moving drag coefficient were made .

提出了计算喷雾干燥塔直径和高度的一种新方法&数值积分法。

A new method & numerical integral method for calculating the diameter and height of spray dryer was ( presented ) .

讨论了研究开发喷雾干燥塔喷管故障在线检测系统的市场潜力。

The market potential about researching on and making the system of on-line inspecting on spray drier 's spray tube fault is discussed in this paper .

详细介绍了5000t/a大豆分离蛋白喷雾干燥塔的设计计算、喷雾干燥塔的结构、附属设备的相关工艺参数；

The design calculation and structure of the spray drying tower with the capacity of 5 000 t / a soybean protein isolate were described in details .