喷焊

镍基自熔性合金喷焊层的耐蚀性

Corrosion Resistance on the Spray Fusing Layer of Ni-Base Self-Fluxing Alloy

低压阀门密封面火焰喷焊铜合金

Spray fusing of copper alloy powder onto sealing surface of low pressure valve with oxygen - acetylene flame

PLC在等离子喷焊过程控制中的应用

Application of PLC in Process Control of Plasma Spray Welding

Cu基、Ni基喷焊层材料的浆体冲蚀性能研究

Study of slurry erosion resistance of Cu-base and Ni-base flame spray welding coating

PLC应用于三偏心蝶阀等离子喷焊系统的设计

Design of PLC Applying to Plasma Spray Welding System for Triple Eccentric Butterfly Valve

热喷焊Ni基Al2O3复合涂层在农业机械中的应用

Apply of Thermal Spray-welding Ni Radix and Al_2O_3 Composite Coating for Agricultural Mechanization

等离子喷焊过程的PLC控制

Controlling Plasma Spray Welding Process with PLC

fe-c-∑x多元合金等离子弧喷焊组织结构和性能研究

Research on Microstructure and Property of Fe-C - Σ X Multicomponent Alloy Plasma Arc Spray Welding

火焰喷焊Ni基WC复合涂层的性能研究

Study on properties of flame spray welded Ni-based WC composite coating

Ni－WC－RE组合粉喷焊层的磨损及腐蚀行为

Abradibility and Corrosion Resistance of Spray-welding Layers of Ni-WC-RE Combination Powder

激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响

Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings

纳米稀土La2O3对Ni基合金喷焊层组织和耐磨性的影响

Effect of Nanometer Rare-earth La_2O_3 on Structure and Abrasiveness of Ni-based Alloy Spray-welding Coating

激光熔敷覆热喷焊Ni基Cr/WC复合涂层耐磨性研究

The Study of Wear Resistance of Cr / WC-Ni Composite Coating by Thermal Sprayed and Laser Cladding

等离子弧喷焊纳米Y2O3/Co50复合涂层的研究

Investigated on the Nano-Y_2O_3 / Co50 Composite Coatings by Plasma Transfer Arc Spray Welding

本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。

The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper .

轧辊工作面的WC颗粒等离子弧喷焊

Spray Weld Rolling Face with Tungsten Carbide Particles by Plasma Arc

等离子喷焊钢结硬质合金中WC熔解的控制

Chinese knot WC melting control in plasma spray steel-bonded carbide

火焰热喷焊技术在CSP输送辊道上的应用

The Application of Flame Spray Welding Technology in CSP Running Table

喷焊层最佳性能的稀土La2O3含量模糊优化

Fuzzy Optimization on the Content of Rare Earth La_2O_3 Based on the Best Properties of Spray Coating

文中介绍了等离子喷焊过程控制的要求、PLC的接口设计和喷焊层数设定程序。

This paper introduces the requirements of the process control , PLC interface design and the software design of spray welding layers .

高载荷、长时间磨损时，Ni基微米粒径的Al2O3喷焊涂层的磨损性能较好；

Ni base micron Al_2O_3 spray-welding coating has good abrasion resistance in the condition of high loading and long time abrasion ;

Al2O3-MxOy硬面陶瓷涂层的喷焊制备及性能研究

Spray Preparation , Microstructure and Properties of Al_2O_3-M_xO Hard-Faced Ceramic Coating

该组织决定了喷焊层基体具有较高的硬度，WC增强颗粒与基体之间具有很高的结合强度。

The structure gives hard matrix and high binding strength of WC grain and matrix .

采用可编程控制器（PLC）控制有助于提高三偏心蝶阀喷焊质量与系统稳定性。

Applying PLC to the plasma spray welding system was helpful for enhancing the quality of triple eccentric butterfly valve and the system stability .

等离子喷焊层中的Fe元素含量达到了11.30%，而激光熔敷层中的Fe元素含量只有3.83%。

The content Fe in plasma spraying coating is up to 11.30 % , while that in laser cladding coating is only 3.83 % .

文中介绍了三偏心蝶阀及其等离子喷焊过程控制的要求、PLC的硬件系统设计与喷焊工艺软件程序设计。

The requirement of plasma spray welding , the hardware design of PLC control system and the software design of spray welding technical program were introduced .

实验表明，控制系统稳定，可以通过VB界面实时控制、监测喷焊过程。

The tests show that the system is stable and the process can be controlled and monitored real-timely through VB interface .

BA型水泵泵体及泵盖的耐蚀耐磨层氧-乙炔喷焊工艺

The spray weld technology of oxyacetylene used for wear resisting and corrosion resisting coat of the casing and cover of Ba pump

利用XRD、SEM、显微硬度计等测试手段，系统研究了镍基复合喷焊层的组织和性能。

The structure and performance of Ni base Al_2O_3 spay-welding coatings were synthetically analyzed with the use of XRD 、 SEM 、 micro-hardness tester and so on .

喷焊主电路采用IGBT逆变单电源，高频引弧器与弧焊逆变器具有良好的兼容性。

IGBT inverter single power source is adopted in main circuit . High frequency arc-striking equipment has good compatibility with inverter .