总线标准

带光电隔离符合PC总线标准数据采集卡设计

The Design of the Date Acquision Card With Optoisolator According to PC-BUS Standard

微处理机中，IEEE接口总线标准的名字。

In microprocessors , the name used for the IEEE interface bus standard .

本文介绍了一种采用STD总线标准的通用可控硅触发脉冲控制器。

A SCR firing pulse controller adopting the STD BUS standard is introduced .

本文阐述了一种高速数据采集板的原理及硬件电路，此板符合STD总线标准；

This paper describes the principle of a ultra-high speed data acquisition board and hardware circuits .

并按照AHB总线标准设计了矩阵运算IP接口，用于和SOC内处理器进行数据交互。

Based on AHB bus standard , matrix arithmetic IP interface is designed for exchange data with processor .

符合PCI总线标准的板卡具有广阔的应用空间，对PCI总线的研究和应用是很有价值的。

PCI card successfully met the demands of the industry . It is highly valuable to do research and application on PCI Bus .

串行通信接口在16位微机中的应用微处理机中，IEEE接口总线标准的名字。

APPLICATONS OF SERIES COMMUNICATION INTERFACE TO 16 DIGITS MICRO-COMPUTER In microprocessors , the name used for the IEEE interface bus standard .

采用RS-485串行总线标准以实现远距离信息传输。

RS-485 serial communication bus standard is adopted , so that information transmis-sion for a long distance is achieved .

分析了PCI总线标准的缺陷，介绍了PCIExpress总线产生的背景和PCIExpress总线的主要技术优势。

The shortcomings of PCI bus standard were analysed . The background of generation of the PCI express bus and the main advantages of PCI Express were described .

接线员，请接中行。微处理机中，IEEE接口总线标准的名字。

Operator , please get me the Bank of China . In microprocessors , the name used for the IEEE interface bus standard .

简要介绍了PCMCIA总线标准及在数据采集领域中的应用。

PCMCIA and it 's appli-cations in data acquisition system are described .

该系统采用STD工业总线标准设计，可靠性高，维修性好，环境适应性强。

For the using of STD industry bus standard in the design , the system has high reliability , maintainability and adaptability to environment .

系统主机为美国DUAL公司的16位微机，系统接口按IEEE696S-100总线标准设计。

Host computer of the system is a 16 hit microcomputer made in DUAL Inc. , USA. The system interface is designed accord - ing to the IEEE Std. 696 ( S-100 ) BUS .

集散型控制系统（DCS）在过程控制领域应用十分广泛，但在数据通讯接口方面没有一个统一的总线标准而且组态软件也纷繁复杂。

Distributed control system is widely used in the process control field , but there is not a uniform bus standard with data communication and its configuration software .

本文在简要介绍嵌入式PC总线标准PC/104的基础上，讨论了基于该总线标准的嵌入式数字遥控系统的软硬件设计。

This paper gives a brief introduction of the embedded PC standard PC / 104 bus standard and then presents the design of an embedded digital remote control system based on the bus standard .

本文主要介绍PC总线标准兼容的自动测试、控制系统的基本设计原理、误差处理技术和系统软件设计特征。

This paper describes the basic design principle of automatic measure and control system . Which is compatible with PC BUS standard . technology of error processing as well as feature of software design .

PROFIBUS是目前适用于整个电厂过程工业的单一现场总线标准，且产品系列齐全；

With full series of products , PROFIBUS is the only field bus criteria applicable to the entire power plant operative process .

此外介绍DCS向FCS过渡的现场总线标准&HART通信协议及基于HART协议的智能仪表的结构及功能。

In addition , HART protocol which can transit DCS to FCS , structures and functions of intelligent instrument based on HART are also introduced .

随动系统通用数字控制器是以8098单片机为核心，按STD总线标准设计的。

Proposes a general purpose digital controller for servo systems , based on a single chip microcomputer & 8098 , and set up on a STD bus .

简单介绍了美国军用数据总线标准MIL-STD-1553B总线协议，给出了通过自顶向下和模块化设计方法，使用VHDL硬件描述语言设计其IP核过程。

The MIL-STD-1553B bus was introduced , its IP core was designed using the top-down and modularization method as well as the hardware descriptive language VHDL .

该系统采用STD总线标准，通过多CPU并行工作方式，实现了基于GPS的对多个天体自动跟踪观测和科学数据采集。

The STD bus standard and multi-CPU parallel processing mode are applied to the system . It can implement the automatic tracking observation and scientific data acquisition to several celestial bodies based on GPS .

在充分了解现有IP核的基础上，设计相应的满足片上总线标准的主设备和从设备接口，并根据需要实现片上总线标准中的各种类型的传输，包括突发传送等。

On the base of the existing IP cores , the relevant master interfaces and slave interfaces according with those on-chip bus standards are designed , and the transfer types of the on-chip bus standards by the needs are realized .

自1993年PCI（Peripheralcomponentinterconnect，外部设备互联）总线标准建立，PCI已经成为一种被广泛采用的总线结构，应用于从便携式电脑到大型服务器等多种计算机系统中。

From the emergence of PCI ( Peripheral Component Interconnect ) in 1993 , PCI has been widely adopted as a high performance bus protocol and used in various systems ranging from portable computer to supercomputer .

本文针对PCMCIA总线标准，讨论了PCMCIA插卡式仪器在测控系统中的应用。

Based on PCMCIA bus standard , this paper discusses the applications of PCMCIA card instruments in test and control systems .

该文介绍一种能利用RS485总线标准，采用自定义串行通信协议，实现CSR控制子系统中的总线通讯的方法。

A paper presents method of making use of RS-485 series to realize CSR controlling system . Which adopts a serial communication protocol that defined by ourselves .

主、从机之间传输介质为双绞线，按RS-485串行总线标准及接口技术实现信息交换。

The transfer medium between the host and slave processors is twisted-pair wire , and the information exchange is accomplished according to the RS-485 serial bus standard and the interface technology .

PROFIBUS-DP是PROFIBUS总线标准的一部分，专为自动控制系统与设备级分散I/0之间的通信而设计的，用于分布式控制系统设备间的高速数据传输。

PROFIBUS-DP is one part of PROFIBUS , designed for the communication between automatic control system and device-level distributed I / O , for high-speed data transfer between distributed control system equipments .

主要研究波形测试及分析系统数据传递问题，测量模块采用GPIB总线标准，模块与计算机间的通讯用VB编程实现。

The paper mainly analyses the waveform measurement and transmission of the tested data GPIB bus standard is used in measurement modules , and by using VB language the communication between modules and PC is realized .

上下控制层间实行基于RS485总线标准下的主从式的异步串行通讯方式；

The method of serial communication , which is asynchronous , based on the standard of RS-485 , is adopted between the master control system and the slave .

在单片机与上位机的通讯中，采用了RS-232总线标准，上位机可实时监控功率因数等状态。

In this system , we use RS-485 bus standard realizing serial data communications of PC and single-chip computer . The PC can monitor the condition of power factor , voltage and so on .