冶炼炉

  • 网络smelter;blast furnace
冶炼炉冶炼炉
  1. 模糊控制在电弧冶炼炉中应用

    The Fuzzy Control Applied in Arc Smelter

  2. 本文阐述了立式冶炼炉(以下简称A)和卧式冶炼炉(以下简称B)两种冶炼方式冶炼的碳化硼粉末的不同性能,以及利用粉末热压烧结制成的碳化硼陶瓷间性能对比;

    This paper describes the different properties of boron carbide powders produced respectively in vertical smelting furnace ( called powder A for short ) horizontal smelting furnace ( called powder B for short ) .

  3. 设计、研制成功了具有多炉芯结构的新型SiC冶炼炉,实验对比了在各种条件一致的情况下,传统的Acheson法与多炉芯加热法冶炼SiC的单产能耗和产品类型。

    A new type of SiC furnace with multi-cores was designed and developed . The specific power consumption of multi-cores heat technology was compared with traditional mono-core heat Acheson technique under the same condition .

  4. S7-300PLC在冶炼炉捅风眼机控制中的应用

    The application of S7-300 PLC in control of smelting furnace tuyere puncher

  5. 真空冶炼炉的改造及自动控制系统的开发

    Modification of Vacuum Smelting Furnace and Development of Its Auto-control System

  6. 油冷氧气底吹冶炼炉风口环缝管壁结炭的研究

    Carbon deposition on annulus of oxygen bottom-blown tuyere cooled by light oil

  7. 有色金属冶炼炉用耐火材料及其发展

    Refractories for non - ferrous metal industry and its development

  8. 基于模糊聚类分析方法的电弧冶炼炉控制系统设计

    Design Control System of Arc Furnace Based on Fuzzy Cluster Analysis Method

  9. 电弧冶炼炉的随机干扰辨识与校正

    Identification and correction of random interference in electric smelting furnace

  10. 基于模糊理论的电弧冶炼炉的单片机改造

    The Alteration of Arc Smelting Furnace Based On SCM And Fuzzy Theory

  11. 碳化硅冶炼炉的微机监测与控制

    Computer Monitor and Control for Smelting Furnace of Carborundum

  12. 刚玉冶炼炉烟气净化设计思路

    The design measures for flue-gas control of corundum furnace

  13. 碳化硅冶炼炉自动控制系统的研制与应用

    Design and Application of Controlling System for SiC Furnace

  14. 微机控制的冶炼炉自动称重配料加料系统

    The Automatic Weighing and Mixture Adding Material System of Metallurgical Stove Using Micro-controller

  15. 冶炼炉车用导电铜辫子的钎焊工艺实践

    Conductive Copper Braid of Brazing Welding Skill Practice in Vehicle of Smelting Furnace

  16. 冶炼炉烟气治理新技术

    New treatment technology of smoke from smelting furnace

  17. 碳化硅冶炼炉尾气回收安全实验及对策研究

    Research on safe experiment and strategies during tail gas recovery of SiC sythesis furnace

  18. 结晶硅冶炼炉烟尘的治理钛硅沸石的结晶动力学研究

    Dust and Flue Gas Control of Crystal Silicon Smelting Furnace Study on Crystallization Kinetics of Titanium Silicalite

  19. 三室真空连续定向结晶炉结晶硅冶炼炉烟尘的治理

    A Vacuum Directional Crystallization Furnace with Tri-chambers Dust and Flue Gas Control of Crystal Silicon Smelting Furnace

  20. 脉冲电湿式脱硫除尘技术及其在精锌冶炼炉的应用

    Technology of wet DeSO_2 / dust by pulse corona induced plasma and its application in Zinc refining furnace

  21. 并为用户配套提供冶炼炉用的环保除尘设备,高压电容补偿器。

    And provide support for users smelting furnace dedusting equipment used in environmental protection , high voltage capacitor compensator .

  22. 根据结晶硅冶炼炉烟尘的特性,给出治理方法和主要工艺参数。

    Based on the characteristics of the dust and flue gas of the crystal silicon smelting furnace , the control measures and major process parameters have been given .

  23. 天空里回荡着工业奏出的乐章,这是一曲由轧钢机、冶炼炉、发电机、大水坝和装配线所奏出的富足美国的大合唱。

    The air rings with the song of our industry rolling mills and blast furnaces , dynamos , dams , and assembly lines the chorus of America the bountiful .

  24. 用模糊聚类分析的方法对电弧冶炼炉的几种主要随机干扰进行辨识,并在此基础上设计了电弧冶炼炉模糊控制系统,取得了良好的控制效果。

    Several main random noises of arc furnace are identified by fuzzy cluster analysis method . A fuzzy control system of arc furnace is designed , and good control result has got .

  25. 针对某厂硅铁、结晶硅冶炼炉的烟气治理,使用自行研制的SCX-Ⅲ型湿式脱硫除尘装置,运行效果平稳。

    In the smoke treatment of smelting furnace in ferrosilicon and crystal silicon smelting of some factory , we use SCX - ⅲ equipment of wet desulfurization and dedusting , and it runs well .

  26. 产品主要用于冶金行业平炉炉顶、电炉炉顶、精炼炉及各种有色金属冶炼炉,此外还用在水泥回转窑烧成带和玻璃窑的蓄热室等部位。

    Their main usage are for metallurgical industry for example , ferrous smelting furnace ; Besides , they are also used in the sintering zone of cement rotary kiln and regenerator of glass furnace , etc.

  27. 介绍了冶炼炉变压器的大电流引出方法及引线结构,对出线铜排与短网铜排联结的几种方法进行了分析比较。

    The lead - out method of large current and the lead constructure in furnace transformer are introduced . The several connection methods of outlet copper bar and short-net copper bar are analysed and compared .

  28. 文中主要研究工作包括:1、在深入分析了废杂铜冶炼炉温度测量与炉温控制相关要求的基础上,研究了炉墙物理结构,建立炉墙多层非线性瞬态热传导模型。

    In this thesis , the following sections are introduced : 1 . After analyzing the requirement of copper furnace temperature measurement and control , we built the nonlinear transient heat transfer model of the wall according to its physical structure .

  29. 结果表明,采用TSRC铬球国矿冶炼,炉况稳定顺行,各项技术经济指标良好。

    The result shows that the furnace condition was well and each technical index was satisfactory .

  30. 集散控制系统在铜冶炼鼓风炉控制中的应用

    The application of DCS to a copper smelting furnace