冶金过程

化学冶金过程中计算机的应用（二）&单元模化及系统模化

The Application of Computer in Chemical Metallurgical Process (ⅱ) Chemical Deburring

第四届冶金过程动力学和反应工程学学术会议

The Fourth Symposium on kinetics and reaction engineering of metallurgical process

研究了一个从低品位钨原料生产高纯仲钨酸铵（APT）的新的湿法冶金过程。流程包括两段逆流浸出；

A new hydrometallurgical process for producing high-purity ammonium paratungstate ( APT )

本法可用于海绵铅及湿法冶金过程的铅、铜试料中微量铋的测定，Bi可富集10倍以上，标准加料回收率达98%，相对标准偏差约3%。

Bismuth can be concentrated more than 10 time . The recovery is 98 % and relative standard deviation , 3 %

氢代替碳还原金属氧化物的主要优点在于其反应产物H2O不对环境产生任何负面影响，是一种符合人类社会可持续发展战略的绿色冶金过程。

Reduction of oxides with hydrogen in place of carbon is considered as a green process , which is in accord with the continuable development policy .

采用SEM观察触点表面经电弧侵蚀后结构与成分的变化，分析触点对电弧响应的物理冶金过程。

The structure and component change of contact surface were studied by SEM after arc erosion . The physical metallurgy process of contact surface was analyzed during arcing .

研究了处理BK铅厂阳极泥的湿法冶金过程。

A hydrometallurgical process treating anode slime in BK lead plant was investigated in this paper .

同时根据计算结果绘制了E-pH图，这些图可以用来指导和解释铊的湿法冶金过程。

These diagrams can be used for directing and explaining the hydrometallurgical processes of thallium .

实验发现，合金化层成形依赖于B、Si造渣剂对熔池金属的保护效果，合金化程度和组织均匀性则取决于B、Si造渣剂对合金化冶金过程的影响。

The results show that the formation of alloying layer depends on the protecting effect of B , Si slagging elements on melting metal ; on the other hand , the alloying degree and microstructure uniformity depend on the influence of B , Si slagging elements on alloying process .

该数学模型的正确建立，使16MnR焊接冶金过程的模拟得以实现，通过模拟可以得出所需焊缝组织的焊接工艺参数，同时也可以通过根据现有的焊接热循环工艺参数预测焊缝组织。

With the model , the simulation of welding process is achieved , and the needed technical parameters of the tissue of welding line are obtained , further more , we can predict the tissue of welding line by the existing welding heat-cycle technical parameters .

冶金过程中熔渣发泡现象的定量描述

Quantitative Description of Forming Phenomenon of Molten Slag in Metallurgical Processes

冶金过程智能控制系统知识库开发的关键环节

Key-links in Establishing Knowledge Base of Intelligent Systems to Control Metallurgy Process

冶金过程中帘线钢夹杂物成分控制

Controlling Inclusion Composition in Steelmaking Process for Tire Cord Steel

冶金过程中复杂夹杂物和钢液化学平衡计算论建立化学平衡的条件

Calculation of chemical equilibrium between complex inclusions and molten steel in steelmaking

全国第五届冶金过程物理化学年会

5th All-China Annual Conference on physicochemistry of metallurgical process held in Xian

不锈钢焊条冶金过程硅元素过渡规律的研究

Law of Silicon Element Transition of Stainless Steel Electrode in welding Metallurgy

有色冶金过程中铟的回收

The Reclaim of Indium from the Course of Nonferrous Metallurgy

冶金过程数据处理方法和遗传算法研究

Study of Data Process Methods and Genetic Algorithm Optimization in Metallurgical Process

固体分子的扩散在冶金过程中尤为重要。

Diffusion in solids is of importance in metallurgical operations .

冶金过程中的时空多尺度结构及其效应

Space-Time Multiscale Structure and Its Effect in Metallurgical Process

喷射冶金过程气液相接触面积的计算及实验测定

Calculation and measurement of gas-liquid interfacial area in the process of injection metallurgy

钢铁冶金过程具有典型的非平衡和非线形特征。

There are classic non-linear and non-equilibrium features during the ferrous metallurgical process .

冶金过程中有机污染物二恶英的形成机理与监测

Formation mechanism and monitoring of dioxin in metallurgical process

冶金过程的自适应预测模糊控制研究与应用

Adaptive Prediction Fuzzy Control System for Metallurgical Process : Its Study and Application

铬渣在钢铁冶金过程中的资源化利用

Resourceful Disposal of Chromium-Containing Residues in Ferrous Metallurgical Process

指出了永磁磁场在湿法冶金过程中的应用前景。

It is pointed out that permanent magnetic fields have application prospect in hydrometallurgy .

稀土冶金过程计算系统的开发

Calculation System for Metallurgy Process of Rare Earth

基于模式匹配的时间序列预测方法及在冶金过程中的应用

Time Series Forecasting Methods Based on Pattern Matching and Its Applications in Metallurgical Processes

冶金过程脱硫成本分析

Cost analysis of desulphurization in different metallurgical processes

超声波强化冶金过程研究进展

Advance in Study of Ultrasonic Intensify for Metallurgy