转换开关

  • 网络SWITCH;changeover switch
转换开关转换开关
  1. 目前处理器的供电单元大多采用高效能稳压模组(VRM)&多相直流转换开关模块。

    Most of state-of-the-art processors utilize high efficient multi-phase DC switch modules ( voltage-regulator-modules , VRM ) as supply units .

  2. 你们有手动换档的车吗?自动手动操舵转换开关

    Do you have any cars with stick shift ? pilot selector switch

  3. 通过Web实现对自动转换开关的监控和数据采集

    Scada for Automatic Transfer Switches on Web

  4. 自动转换开关在低压配电系统中的应用关于{x/n}的分布

    Application of Automatic Transfer Switch in Low-Voltage Power Distribution System

  5. 基于CPLD的智能固态转换开关的研制

    Development on the Intelligent Solid-State Transfer Switch Based on CPLD

  6. 基于IGBT的混合式自动转换开关研究

    Research on hybrid automatic transfer switching based on IGBT

  7. TN系统PEN线接地和电源转换开关极数的确定

    Grounding of PEN Conductor in TN System and Pole Number Determination of Power Transfer Switch

  8. 正激式零电压转换开关电源设计及PSPICE仿真

    Design of forward zero-voltage-transition switching power supply and its PSPICE simulation

  9. PLC自身具备可靠性、灵活性、易操作性的特点,利用PLC控制转换开关(ATS)可实现交流所用电系统的多种运行功能。

    Using Auto Tumbler Switch ( ATS ) controlled by PLC , this system can operate in more different modes .

  10. 两种模式间的切换由多模式转换开关K控制。采用Lyapunov稳定判据对系统的稳定性进行了分析。

    The selecting between two modes is decided by multi-modes switch K. The proposed control method is analyzed for stability by Lyapunov theorem .

  11. 功能区转换开关为主LotusiNotes功能区提供了应用程序图标。

    The functional area switcher offers application icons for the main Lotus iNotes functional areas .

  12. 文中还给出3∶2(G)/1转发器系统的转换开关设计,它可以实现交叉切换功能。

    Also a design of switch for 3:2 ( G ) / 1 repeater system is given , by which the function of cross-strapping switch over can be implemented .

  13. 针对n台可靠度负指数分布的设备组成的热贮备系统,其中转换开关的可靠度或者是常数或者是负指数分布的情况,建立了转换开关不完全可靠的热贮备系统可靠性模型。

    The reliability model of hot stand-by system by consisted of n equipments possessing constant failure rate and a imperfect transform switch possessing constant reliability or constant failure rate is established .

  14. 它还利用了许多相同的基本UIWidget,例如功能区转换开关、菜单栏和分隔条等。

    It also leverages many of the same base UI widgets , such as the functional area switcher , menu bar , and splitter .

  15. 零电压转换开关在隔离式Cuk电路中的应用

    Zero-Voltage - Transition Topology for Isolated Cuk Converter

  16. DAC电路为阻容网络耦合的电荷再分配型DAC,其中各位的转换开关为CMOS传输门。

    The circuit of DAC is a type of charge redistribute that consisted of resistance array and capacitance array . Each conversion switch is controlled by CMOS transfer gates .

  17. 本文从对自动转换开关电器(ATSE)进行了深入的理论研究和实践探索。

    The study both in theory and practice on ATSE is widely carried out in this dissertation .

  18. 为了保证重要负荷的供电连续性,自动电源转换开关设备(ATSE)已得到广泛应用。

    In order to ensure continuous power supply of important load , Automatic Transfer Switching Equipment ( ATSE ) has been widely used .

  19. 由于双电源自动转换开关(ATSE)具有使用安全、转换迅速、无需值守的特点,近年来得到了广泛的应用。

    Recently , automatic transfer switching equipment ( ATSE ) is widely applied because of its safety , fast switching and without man on duty .

  20. 阐述了在建筑物电气装置内PEN线一点接地防杂散电流危害的问题,并分析了它与TN系统内正常电源和发电机电源间转换开关极数确定的关系。

    The paper presents single point grounding of PEN conductor can prevent stray current inside building electrical equipments . Based on it , the author also analyses pole number 's determination of power transfer switch between generator and normal power supply in TN system .

  21. 对断路器、刀开关(电动式)和自动转换开关电器(ATSE)三种产品在结构、性能及符合标准等方面进行了分析与对比。

    The structure , performance and standard of the circuit breaker , knife switch ( electric operation ) and automatic transfer switching equipment ( ATSE ) were compared and analyzed .

  22. 介绍了最新开发的SQ30Z系列智能型自动转换开关的工作原理、结构、性能特点和主要技术参数。

    The operating principle , structure features and main specifications of SQ30Z series intelligent automatic transferring switch of power supply were introduced .

  23. 采用了高绝缘自动量程转换开关,测量范围为10nGy·h-1-20mGy·h-1。

    The measurement range is from 10 nGy · h - 1 to 10 mGy · h - 1 , because a high insulation switch automatically changing measurment range is used .

  24. 文章介绍了自动电源转换开关电器(ATSE)的典型用途、合理选用等性能要求,说明了ATSE在电源转换中的技术难点及在产品结构上可采取的措施。

    The article introduces the typical applications for power automatic transfer switching equipment ( ATSE ), as well as reasonable selection etc performance requirements , having explained the difficult points in power transfer for ATSE technically and the adoptable actions on the product structure .

  25. 通过查资料可以得知自动转换开关装置70%以上的故障都是因为控制器的问题,不是因为执行机构,由此可以得知控制器的可靠性和安全性直接影响到ATSE整体的可靠性和安全性。

    According to reference material we can know that more than seventy percent of the ATSE fault is caused by the controller problem , not the switch ontology . Therefore , we can know that the controller reliability and safety directly affect the reliability and safety of the whole ATSE .

  26. 转换开关不完全可靠的热贮备系统可靠性模型

    The Reliability Model of Hot Stand-by System with Imperfect Transform Switch

  27. 固态电子转换开关应用仿真研究

    Simulation Research on the Application of the Solid State Transfer Switch

  28. 智能型自动转换开关的通信接口设计

    Design of Communication Interface in Intelligent Type Automatic Transfer Switch

  29. 两种模式的切换是通过模式转换开关实现的。

    Conversion of the two modes is achieved through the mode switch .

  30. 双电源自动转换开关在变电站中的应用

    Application of Auto Transferring Switch with Dual Power Supply in Electric Substation