电焊条

稀土钇及硼在3.5%镍电焊条中的行为

Behavior of Rare-earth Yttrium and Boron in 3.5 % Nickel-containing Welding Electrode

选择电焊条咨询系统的初探

Tentative Study of Consulting System for Selecting Welding Electrode

用途：用作电焊条生产之焊条芯线，埋弧焊丝（SAW）、氩弧焊丝（TIG）、电弧焊丝（MIG）之半成品线。

Application : with steady chemical compositions , it can be used in welding and manufacturing semi-finished of SAW , TIG , MIG wire , etc.

TCS铁素体不锈钢采用奥氏体型焊材，实芯焊丝、药芯焊丝和电焊条方法，焊接接头力学性能可以满足使用要求。

With austenitic welding material , solid wire , flux-cored wire and electrode , welded joint mechanical property of TCS ferritic stainless steel all can meet usability .

系统功能强大，界面友好，操作方便，可作为E4303电焊条产品设计和技术管理的强有力的工具。

The system function is formidable , and the interface is friendly , and it may be used as a powerful tool E4303 electrode design and the technical management .

电焊条的分析与研究

The analysis and the research of the electric shock of welding

电焊条的准则就包含了爆破。

The code for the mode of electrodes has included explosion .

对纤维素型全位置立向下焊高效电焊条的药皮成分进行了研究。

The coating ingredient of whole type of electrode was studied .

电焊条检验中试样制备有关问题探讨

Discussion of some problems about preparation of specimen in test of electrodes

船用角焊缝低氢下行电焊条的研制

The Development of Low-Hydrogen Down-Electrode for Marine Angle Seam

我国航空焊接材料主要是指电焊条、焊粉和钎剂。

Aero-welding material means the materials of welding electrodes , powder and fluxes .

药芯焊丝和电焊条的焊接工艺性能稍好，但焊缝的韧性较低。

Flux-cored wire and electrode has lower toughness but good welding processing properties .

电焊条计算机辅助技术质量管理系统开发

Computer aided technology quality control system of covered electrodes

沉淀硬化钢电焊条的研制

Development of the Welding Electrode of Dispersion Hardening Steel

电焊条生产技术及设备石膏空心条板生产技术

Production line and technology for manufacturing electrode technique for gypsous hollow strip panel production

电焊条是用于起重机的原材料。

Welding is used cranes raw materials .

EDC68高硬度高耐磨堆焊电焊条

A Superhigh Hardness Surfacing Electrode EDC 68

电焊条生产技术及设备

Production line and technology for manufacturing electrode

药皮涂层连续电焊条的研制

Research and development of continuous coated electrode

特种碳化钨电焊条的研制

Development of Special WC Electrode

镍铬硼硅电焊条的研究

A Research on Ni-Cr-B-Si Electrode

用于管线钢的低氢型全位置下行（立向下）SGH&1电焊条的研制

Developmet of the Type SGH-1 Low hydrogen Electrode Used for Stee Pipeline Welding in Vertical Down All position

本机是电焊条生产的专用设备，在焊条生产中该机承担涂粉工序。

The machine is a special equipment for producing welding rod and this machine undertakes the coating procedure among the welding rod production .

铬不锈钢冲压弯头焊接性较差，应注意焊接工艺、热处理条件及选用合适电焊条。

Chromium stainless steel stamping poor welding elbow , should pay attention to welding , heat treatment conditions and appropriate choice of electrodes .

在皮肤裸露、戴有湿手套或穿着湿衣服时，禁止接触带电部件或电焊条。

At the skin bare , wear wet gloves or wear wet clothes , forbid contact to take the electricity parts or electric welding .

人造金红石高钛渣、天然金红石等富钛料是生产钛白粉电焊条和海绵钛的原料。

Titanium pigment , electric welding bar and titanium sponge are made from raw materials which are rich in titanium such as synthetic rutile and titanium slag etc.

采用七种高纤维素型立向下电焊条，通过斜Y坡口裂纹实验，对高强管线钢的冷裂敏感性进行实验研究。

The cold cracking sensibility of high tensile pipeline-steel was studied by Ygroove cracking test using seven kinds of high cellulose electrode of vertical down position welding .

研究了基于电焊条化学成分与熔敷金属抗拉强度的关系；讨论了网络隐含层神经元个数对预报结果的影响及其变化规律。

According to the research on electrode chemical components and mechanical property , the rule of the relationship between nerve cell number and net prediction has been drawn .

介绍了用于烧结机械零件、电焊条和其它领域的水雾化纯铁粉的生产工艺，产品性能及其性能变化的影响因素。

Production process , properties and factors affecting their performance of water atomized iron powder used for sintered machine parts , welding electrodes and other fields were introduced .

对含镍3.5%低温钢手工电焊条配方中稀土钇与硼的作用进行了试验研究。

The investigation of effects of rare-earth yttrium and boron , which are in the 3.5 % nickel-containing steel welding electrode on low temperature toughness has been carried out .