料位检测

  • 网络Material level detection;material level measurement
料位检测料位检测
  1. 火电厂钢球磨煤机料位超声检测的实验研究基于球磨机电声功率谱料位检测系统的研究

    Experimental Analysis of Ultrasonic Testing for Level of Material in Tubular Ball Mill of Fossil-fuel Power Plant ; Research of Ball Mill ′ s Material Level Measurement System on Sound-electronic Measurement

  2. 由于特殊的工作原理,TURCK电容式传感器被广泛地应用于自动化生产设备上,实现物品分检或料位检测等功能。

    TURCK capacitive sensors are suitable for widely applications for material level detection and articles separating in the automated production equipments due to the special principles .

  3. 用静压控制法实现小颗粒固体粉尘的料位检测控制

    Measurement and Control of the Small Solid Dust by Static Pressure

  4. 料仓高料位检测装置的选型与比较

    Selection and Comparison for the Form of Detection Gauge of Silo High Level

  5. 超声波传感器在固体料位检测中的应用

    Application of Ultrasonic Sensors for Solid Material Level Detection

  6. 球磨机料位检测仪的开发及其在优化运行控制上的应用

    Development of Instrument to Measure Material Level of Ball Mill and Its Application

  7. 一种气、固流化床料位检测的新方法

    A new method for the measurement of bed height in gas-solid fluidized bed

  8. 居住区停车方式的选择料位检测的探索

    Alternatives for Parking Space Design in Residential Areas APPROACH TO DETECTION OF MATERIAL LEVEL

  9. 电导探示器(料位检测用)电导率涡流检测技术在铝合金质量控制中的应用

    The Application of Eddy Current Electrical Conductivity Testing in the Quality Control of Aluminium Alloy

  10. 温度检测技术在鲁奇炉灰锁料位检测中的应用

    Application of Temperature Detection in Determining the Level of Ash Lock of the Lurgi Gasifier

  11. 磨音料位检测仪

    Milling Noise Material High Measuring Instrument

  12. 灰色软测量在球磨机料位检测中的应用

    A Study of the Use of Grey Soft Measurement in the Detection of Fill-up Level of Ball Mills

  13. 由于数字信号处理、内部温度补偿和新的传感器材料等技术的发展,使超声波换能器在固体料位检测中得到了更多的应用。

    DSP , built-in temperature compensation and new transducer materials have expanded the use of ultrasonic in solids measurements .

  14. 该结论对超声在球磨机料位检测方面的应用具有一定的指导意义。

    This conclusion has certain guiding significance in aspect of applying ultrasonic frequency to detect material level in ball mills .

  15. 重锤式粉尘料位检测系统设计钢厂粉尘料位传感器研究

    Design of powder material position measure system The Research on the Sensor Applied in Steel Company for Detecting the Dust Bin Level

  16. 论文对均化库模型机械设计、料位检测仪以及均化库的控制电路和相关的软件设计进行了详细的说明。

    The article gives a detailed explanation about mechanical design 、 control circuit and relevant software of the homogenization silo and Charge level indicator with sway .

  17. 根据目前国内现有的用于水泥厂料位检测与控制的开关式同位素料位计的现状,研制了一种新型同位素料位计。

    According to the situation of current domestic switch isotope level meters used for the level measurement and control in cement factorys , a new type isotope level meter is developed .

  18. 多年以来,人们尝试了各种各样的料位检测方法,都因为井下环境恶劣等原因没有取得很好的效果。

    Over the years , people have tried a variety of material level detection methods . The condition of underground bunkers are bad , the results have not been very good .

  19. 由于本研究系统被测对象环境温度较高且潮湿,同时料仓中有大量粉尘及蒸汽,因此传统的料位检测方法不能满足本测试要求。

    The traditional level measuring methods cann 't meet our demand because the subjective investigated is in such a poor systemic condition that the temperature is a little high and there 's so many mill dust and steam there .

  20. 针对液态沥青粘度大、温度高、流动性差的特点,对实现其料位检测的一种新型声波测距系统的机理进行了研究。

    Aiming at some characteristics of liquid asphaltum as more viscosity , higher temperature and lesser fluidity , the principle of a new type measuring range system with sound-wave for measuring level of material of liquid asphaltum is researched .

  21. 钢球磨煤机料位超声检测的试验研究

    Test Study on ultrasonic detection of material level in ball mills

  22. 一种粒状物料料位自动检测的研究

    The Automatic Detection of the Level of Granular Materials

  23. 具有料位自动检测和待机功能,自动计量,自动停机;

    Functioned with automatic checking for material level and standby , automatic measuring and stop .

  24. 同时介绍了在系统软硬件控制下利用探头触及料面时负载力矩减小引起的电枢电流变化反馈信号,实现粉尘类料位自动检测与显示的过程。

    And the process of automated measure under control of the system software and hardware is introduced .

  25. 采用单片集成电路电极式料位检测器检测料仓料位,将检测信号及设备运行信号输入PC。

    A electrode level gage with single unit integrated circuit is used to detect the material level in the storehouse . The signals from detector and the operation condition of conveyer are entered into PC.

  26. 软件设计主要包括传感器驱动信号的分时控制,有效料位信号的检测与处理,以及通过软件实现料位传感器故障自诊断功能。最后,完成以RS-485总线通信方式实现的变频调速功能。

    Software design mainly contains time-sharing controlling of the level sensor driving signal , measuring and processing the effective material level signal , and implementing level sensor fault self-diagnosis function by software . Finally , it achieves frequency control technology by RS-485 bus in the way of communication .

  27. 烧结热返矿槽料位上、下限检测

    Measurement of upper and lower limit of hot return sinter level in Bin

  28. 该装置解决了高温且物料流速较慢的矿槽料位上、下限检测的技术问题。

    The technical problems present in measuring upper and lower limit of hot return sinter level in bin were solved .

  29. 简要介绍了几种料仓高料位和极限高料位检测报警装置的结构和工作原理,并就它们的性能特点和使用效果进行了比较。

    The structures and operating principles of several upper bin-level and limit-level monitor-alarm systems were presented in this paper , and their properties and operating effects were compaired .

  30. 该传感器可应用在精度要求不高的固态料位、粉状料位和液位的检测。

    This new sensor can be applied to detect solid state , powdery and liquid levels of material that precision requirements are not higher .