挤出造粒

本杌采用热切方法挤出造粒，主要用于PVC塑料造粒，其特点；

The machine produces pellets by hot cutting , mainly PVC pellets .

PE色母料挤出造粒生产线简介

Brief on PE coloring material granulating line

橡胶促进剂CBS挤出造粒的实验研究

Experimental Research on Powdery Accelerant CBS Squeezing Granulation

两者的复合过程采用双螺杆挤出造粒法更利于GF形成良好的取向性，高速混合机复合造粒则更利于防止原料PP的降解。

The two double-screw extruder granulation method is beneficial for GF to form a good orientation , and high speed mixer granulator prevents the degradation of PP material .

挤出造粒机组自动配混料控制系统设计

Design of Automatic Burden and Blending Control System for Squeezing Granulation Unit

添加方便、力学性能优异，可以与塑料直接混合注塑或挤出造粒。

It can be mixed directly with plastic to inject or extrude .

高聚物挤出造粒形式和原理

Method and Principle of Polymer Extrusion Pelletization

用挤出造粒、气流包衣技术制备氟尿嘧啶肠溶微粒。

Enteric coated fluorouracil micro-granules were prepared with extrusion , spheronization and airflow coating method .

加工出来的样机能有效地将废旧塑料进行挤出造粒。

Processing out of the prototype can be effectively carried out granulation of waste plastics .

挤出造粒时，应严格控制机头和均化段温度。

When extrusion granulating , the temperature of head and homogenizing zone in extruder should be strictly controlled ;

对原材料的干燥与配混，挤出造粒，过滤板模压时的预热、保压、固化、脱模及后处理等工艺进行了详尽的说明。

The drying and blending of raw materials , the extruding and prilling process , the mould pressing and post-treatment and so on are elaborated .

进行了各种相关工艺条件对挤出造粒的影响，包括挤出速度、模头温度及螺杆形式和定型模具对挤出成型的研究；

The impact of various process conditions on extrusion and pelletizing is studied , including the change of extrusion speed , die head temperature and screw types .

水性肠溶型聚丙烯酸树脂类药物包衣材料的研制挤出造粒、气流包衣法制备包衣微粒剂.Ⅵ.氟尿嘧啶肠溶微粒的制备和药动学研究

The Study of Aqueous Enteric Poly-acrylic Acid Resin Used for Film-coating Material Preparation of Micro-granules with Extrusion and Airflow Coating Method . ⅵ . Preparation and Pharmacokinetics of Enteric Coated Fluorouracil Micro-granules

本工作采用挤出造粒与注射成型的工艺，研究了以短碳纤维和玻璃纤维混杂增强尼龙1010的机械性能、耐热性、摩擦磨损性能及其混杂效应。

The hybrid carbon-fiber / glass-fiber reinforced nylon 1010 is prepared by extrusion and injection moulding . The fibers are oriented along the direction of the flowing of inject - ed or extruded material .

综述了国内外聚合物配混料用连续混炼机的发展现状，特别叙述了啮合同向双螺杆挤出造粒机的发展，并对我国连续混炼机的设计制造和使用提出了一些建议。

Present situation of development of continuous mixers for polymer compounds in the world , especially kneading co rotating twin screw extruders for compounds is summarized , and some proposals for design and operation of continuous mixers are presented .

以废旧PP、锯末木粉为原料，采用双螺杆挤出机造粒生产环保型塑木复合材料。

Recycled polypropylene ( PP ) and wood powder were employed to prepare composites via twin-screw extrusion .

以桦木粉和HDPE为原料，采用双螺杆挤出机造粒，单螺杆挤出机成型的方法加工木塑复合材。

Using birch powder and HDPE as raw material , using twin-screw extruder to mix granulation and single screw extruder to process WPC .

方法：用挤出滚圆造粒机及流化床包衣设备制备感冒清微丸。

METHODS : Extruded-spheronizing granulator and fluidized coating-machine were applied for Ganmaoqing micro-pills'production .

通过聚苯硫醚（PPS）与大颗粒氧化镁（40~325目）混合经双螺杆挤出机挤出造粒制备了导热绝缘塑料。

Thermal conductive insulating PPS plastics were made by extrusion compounding PPS with MgO particles of large particle sizeBF ( 40 ~ 325-mesh ) BFQ .

通过实际检验，展示了机组在能量消耗，挤出产量和造粒质量等方面的优点。

Tile results of experiment show the merits of the system in energy consumption , output and granulation quality .

相对润湿度概念及其在挤出&滚圆法造粒中的应用

Relative Wetting Degree and Its Application on Preparation of Pellets by Extrusion-spheronization

挤出成型用喷雾造粒氧化铝粉料

Spray-Dried Alumina Granules for Extrusion

以废旧塑料和木粉为主要原料，采用单螺杆挤出机预混造粒和热压成型方法制备木塑复合材料。

The WPC composed of recycling plastic and wood powder were prepared by using single screw extruder and mould pressure method . 1 .

以聚碳酸酯（PC）和ABS为基体树脂，添加增容剂、阻燃剂及其它助剂，经双螺杆挤出机熔融共混挤出造粒，制得PC/ABS手机充电器专用料。

With polycarbonate ( PC ) and ABS as basic resin , and adding compatilizer , flame retardant and other assistants , special material PC / ABS for mobile phone charger was developed by melt blending and extrusion graining with twin-screw extruder .