悬架

xuán jià
  • suspension;hanger bracket
悬架悬架
悬架[xuán jià]
  1. 汽车悬架经过改进,乘坐起来更平稳。

    The car 's improved suspension gives you a smoother ride .

  2. 我们的车被拖走了,要对悬架进行大修。

    Our car was towed away to have its suspension overhauled .

  3. 这个主动悬架系统使汽车行驶起来非常平稳。

    The active suspension system gives the car a very smooth ride .

  4. 汽车的悬架装置是用来减轻行驶在崎岖路面时乘客的颠簸感的。

    The suspension is designed to cushion passengers from the effects of riding over rough roads .

  5. H2和H∞主动悬架统一的理论框架与比较

    H_2 and H_ ∞ Active Suspensions A Unified Theoretic Framework and Comparison

  6. 后悬架采用独特的E型多连杆结构;

    The rear suspension is the unique E-type multi-link suspension .

  7. 手扶拖拉机X型悬架座椅的研究

    Research of walking tractor X type seat suspension

  8. 一种模糊自调整PID在车辆液压悬架主动控制中的应用

    Application of a fuzzy self-adaptive PID to the active control of hydraulic suspension for an automobile

  9. 车辆MR半主动悬架的Fuzzy-PID控制研究

    Fuzzy-PID Control of MR Semi-Active Suspensions

  10. 分别建立了汽车电动助力转向(EPS)模型与主动悬架系统(ASS)模型,提出了EPS与ASS的集成模型。

    The EPS model and ASS model of an automobile was built respectively .

  11. ADAMS整车建模中悬架关键点精度对仿真结果的影响

    Influence on Simulation Result by Accuracy of Suspension Key Points in ADAMS Full Vehicle Modelling

  12. 在输入一定激励信号的情况下,把模糊控制半主动悬架与被动悬架及PID控制半主动悬架的工作情况进行了比较。

    Under the input of certain actuating signals , FFC semi-active suspension is compared with non-active suspension and PID control semi-active suspension .

  13. LMS自适应主动控制汽车悬架系统试验研究

    Simulation Study on LMS Adaptive Control Active Suspension System

  14. 基于MSCADAMS的汽车柔性扭力梁后悬架特性分析及操稳性仿真

    Analyses on Rear Suspension Characteristics and Handling Performance with Flexible Twist Axle Using MSC Adams

  15. 采用自适应模糊PID控制策略对悬架控制,实现了PID控制过程中参数的在线自整定,从而使系统的控制性能更加完善。

    The self-adaptive fuzzy PID control strategy is introduced to the suspension control to realize the online self-setting of all parameters in PID control process .

  16. 含时滞的LQ控制车辆悬架的研究

    Effect of Time Delay on Active Vehicle Suspensions Equipped with Linear Quadratic Control

  17. 采用改进Bingham模型的非线性汽车悬架的主共振

    Primary resonance of a nonlinear vehicle suspension system using a modified Bingham model

  18. 根据汽车平顺性的评价方法,应用matlab语言编制了整车五自由度模型的悬架系统性能仿真程序。

    According to evaluating method of automotive ride comfort , a suspension system performance simulation program for five DOF ~ ′ s vehicle model is developed , using Matlab language .

  19. 文中使用的神经网络辨识器和神经网络控制器均使用BP神经网络,在Matlab中编写仿真程序进行汽车半主动悬架神经网络自适应控制的仿真。

    The structure of neural network controller and neural network identifier are BP neural network . Simulation program was compiled in Matlab to finish simulation study of neural network control system .

  20. 根据悬架系统特点,研制了两自由度悬架模型试验系统,以此为基础展开了主动悬架控制理论与试验研究,将LMS自适应滤波技术应用于车辆主动悬架的控制中。

    Riding Estimation of Two-Freedom-Degree Nonlinear Model for Vehicle Dynamics The LMS adaptive filter technology is applied in the vibration control of vehicle active suspension .

  21. 通过建立板簧总成片与片之间的接触单元,采用ANSYS有限元分析软件对某一新型混合动力牵引车前悬架的上、下板簧总成的刚度和强度进行分析。

    Stiffness and strength of upper and lower leaf spring assembly of the front suspension in a new compositely powered traction vehicle are calculated respectively with the ANSYS finite element analysis software .

  22. ADAMS及ANSYS软件,在ADAMS/Car[1]中建立了中型客车前空气悬架系统刚柔体耦合的动力学模型。

    ADAMS and ANSYS softwares to establish the dynamic model of rigid and flexible body coupling of medium bus air spring suspension system in ADAMS / Car [ 1 ] .

  23. 基于遗传算法和LQG控制的汽车半主动悬架结构和控制参数的集成优化研究

    Integrated Optimization of Structure and Control Parameters for an Automotive Semi-active Suspension System Based on Genetic Algorithm and LQG Control

  24. 针对某微型车的前悬架转向系统,利用ADAMS/Car模块进行双轮反向跳动和转向的耦合试验,分析了运动特性和弹性运动特性参数,为整车的操纵稳定性和平顺性的进一步研究奠定了基础。

    Using ADAMS / Car model , by front suspension steering system of the mini car , discuss kinematic and compliant character , establish the foundation for research of handle stability and ride for full vehicle .

  25. 针对汽车车辆的空气悬架系统作了理论分析和计算机仿真研究,首先运用ADAMS建立了悬架的动力学模型和控制系统模型;

    Theory analysis and simulation study of vehicle air suspension system was made . The dynamic model and control system model were founded for the suspension based on ADAMS software .

  26. 建立了一个基于PID-Fuzzy混合控制的汽车主动悬架系统模型。

    The active suspension model based on PID-fuzzy control is built .

  27. 将汽车电动助力转向系统(EPS)模型、转向模型和主动悬架系统(ASS)模型相结合,建立了整车系统的动力学模型。

    Combining automotive Electrical Power Steering System ( EPS ) model and steering model with Active Suspension System ( ASS ), the paper set up a full car dynamic model .

  28. 采用非线性Bingham模型,研究基于磁流变阻尼器的1/4车辆悬架的非线性振动特性。

    The nonlinear Bingham model is adopted , and the nonlinear vibrations of quarter vehicle suspensions with magnetorheological ( MR ) dampers is analyzed .

  29. 在对汽车电动助力转向(EPS)与主动悬架系统(ASS)相互影响和协调关系进行分析的基础上,建立了将这两者集成的整车模型。

    On the basis of analyzing the mutual influence and corresponding relationship between electric power steering and active suspension system , a whole integrated vehicle model is built in this paper .

  30. 将电动静液压作动器EHA(Electro-HydrostaticActuator)应用于汽车主动悬架中,并提出了基于EHA的主动悬架样机结构。

    An electro-hydrostatic actuator was introduced into vehicle active suspension and the prototype structure of active suspension with EHA was proposed .