产品试验

产品试验工程管理过程和方法

Managing Procedures and Methods for Product Testing Engineering

也为五征载货汽车的研发开辟了一条利用虚拟样机技术正向开发之路，降低了产品试验强度，缩短了产品开发周期，提高产品开发的准确性与成功率。

Sign truck for five research and development has opened up a positive use of virtual prototyping technology development , and reducing product testing strength , shorten product development cycles , improve product development , the accuracy and success rate .

主要介绍国际船级社协会（IACS）推荐的机械接头的型式、要求、应用条件以及对机械接头产品试验的具体要求。

In this paper , the types , requirements , and application conditions together with the products testing requirements for mechanical joints recommended by International Association of Classification Society ( IACS ) are introduced .

汽车产品试验室工作质量控制研究

Research on Controlling the Working Quality of the Auto-production Test Laboratory

水源热泵在空调产品试验装置中的应用

The Application of Water-Source Heat Pumps in Test Installation For Air-Conditioning Products

航空电器产品试验室分布式监控系统研究

Study on the Distributed Supervisory Control System for Aviation Electric Appliances Product Laboratory

石油产品试验结果处理、报出等相关标准的应用

The Application of Relating Standards of Petroleum Products Testing Results Treatment and Report

结合产品试验了高铝锌基合金的离心铸造工艺。

The centrifugal casting process of high aluminum-zinc alloys was investigated through products .

GB/T6683-1997石油产品试验方法精密度数据确定法

Petroleum products & Determination of precision data in relation to methods of test

产品试验信息管理系统设计与开发

Design and Developing of Product Experiment Information Management System

产品试验信息系统中图像信息的管理方法研究

The Management Process Research of the Image Information in the Product Experiment Information System

我进行产品试验。

I conduct a product test .

GB/T4471-1984化工产品试验方法精密度室间试验重复性和再现性的确定

Precision of test methods for chemical products & Determination of repeatability and reproducibility by inter-laboratory tests

在试验过程中达到以自动化降低人工负荷，以设备保障试验数据的可靠性的目的，使汽车电器产品试验成为一个可控、可溯、可重复的过程。

It makes testing of automotive electrical product to be a controllable , traceable and repeatable process .

极小子样高可靠性成败型产品试验的贝叶斯评估方法研究

Study of Bayes , Estimation for Product Test of Extreme Small Sample High Reliablity Safe or failure Pattern

封闭功率传动试验台在齿轮传动产品试验和工程实践中被广泛地应用。

Closed Power Transmission Test-Board is widely used in the test of gear driving products and practical projects .

纺织橡胶器材技术研究中存在的主要问题是基础研究薄弱、产品试验不规范、材料和装备研究不够。

The main questions are short of basic research , standard product test , and material & equipment research .

按照石油和石油产品试验方法国家标准对产物的凝点、分子量和粘度进行了测定。

Solidifying point , molecular-weight and viscosity of product were determined according to National Standards of Test Method To Petroleum And Petroleum Products .

本文提出相应的孔隙率计算公式，其结果与国外同类产品试验数据吻合。

In this paper , corresponding computational formula of the porosity was established , and the results were in accordance with the experimental data of the similar products abroad .

介绍了中频感应加热的基本原理和优越性及机组的中频参数选择、机组调试数据、产品试验结果。

To introduce the basic principle and advantages of middle - frequency induction heating , the selection of middle - frequency parameter , the adjusting data , the test result of products .

它的使用可使航空机载电机、电器和机构的起动电流、工作电流和电流稳定性等指标均满足产品试验要求。该脂经长期封存后其外观、结构和使用性能均无明显变化。

The requirements of product examination in start current , operating current and current stability are meeted by the application of the grease to motor , electric apparatus and mechanisms in aircrafts .

首先阐明了极小子样高可靠性成败型产品试验评估的重大意义及通常用贝叶斯法解决该问题时所遇到的困难。

The importance of Bayes , estimation for extreme small sample , high reliability , safe or failure pattern is explained in this paper , the difficulty in solving these facts is involved .

在电子产品试验的可靠性评估中，为提高估计精度，经常利用历史样本数据来确定先验分布。

In the reliability assessment of electronic products , the history sample and the current sample often belong to different populations , which may have remarkable effect on the result of the assessment .

根据产品试验结果，提出了试验条件的选择，应视产品结构（封接玻璃、引线的尺寸）的具体情况分别规定。

According to the test results , that the choice that test conditions should be consistent with the output structure ( encapsulated putty 、 the size of the down - lead ) is presented .

根据产品试验件的外形数据，结合产品制造工艺过程中的变形信息，对模具复杂曲面进行逆向工程设计。

Reverse engineering design has been conducted on the complicated curved surface of the mould for a sample , radar dome , according to the outline data of the sample and the deformation information measured in the manufacturing process .

每天他很早就来到公司，做完手头的工作，就在公司的实验室里做新产品试验。回到家中，就埋头钻研有关资料。

Every day , he came to the company early , after finishing the work at hand , Wine would stay at the company 's lab and do experiments all day long and read related books when going home .

然而，案例研究和其他定量证据能证明以下情况：对于贫困家庭和小型企业所谓小额保险业务的潜在社会价值，值得更大量的商业模式和产品试验，结合商业和慈善元素，发展可扩展的方法。

Nonetheless , case studies and other qualitative evidence make a persuasive case that the potential social value of so-called micro-insurance provision to poor households and small-scale entrepreneurs warrants a great deal more experimentation with business models and products to develop scaleable approaches that combine commercial and philanthropic elements .

产品验收试验中参数的Bayes序贯估计

Bayes sequential estimation of the parameter about acceptance test of products

灰色GM（1,1）模型在机械产品寿命试验数据预测中的应用

The Application of Grey GM ( 1,1 ) Model to the Forecasting of Life Test Data of Mechanical Products

IT、AV类电子产品阻燃试验的选择

Selection of Flame Retardant Testing of IT , AV Products