自攻螺钉

  • 网络screw;tapping screw;Self-tapping screws;Self tapping screw;self-drilling screw
自攻螺钉自攻螺钉
  1. 通过试验,测得自攻螺钉连接受剪破坏时所施加的荷载N以及在该荷载下试件连接处位移δ的数据,并观测记录了试验现象。

    Throughout the test , the applied load N when the Self-tapping Screw connections fails and the displacement δ of the Self-tapping Screw connected joint under load N are obtained .

  2. 在门扇上用自攻螺钉固定门扇页面。

    C.Fix the hinge on the door leaf with tapping screw .

  3. 自攻螺钉连接冷弯薄壁C型钢梁柱节点试验及分析

    Experiment and Analysis of Cold-formed Thin-walled C Steel Beam-to-Column Connections in Self-drilling

  4. 8个足尺自攻螺钉连接的冷弯薄壁C型钢梁柱节点的试验。

    The experiments of 8 full size cold-formed thin-walled C steel beam-to-column connections with self-drilling screws connecting .

  5. 采用塑性壳单元模拟墙体各构件,墙架柱和梁之间采用铰接方式连接,墙体的自攻螺钉连接处采用耦合的方法处理,方程组求解方法由ANSYS程序自动选择。

    The steel members are simply connected . The screws connecting of the sheathings to the frame are modeled through coupling methods . The equation resolution method is selected by ANSYS program automatically .

  6. 小桁架的弦杆由冷弯薄壁方钢管或矩形钢管构成,弦杆通过标准的V型连接件和自攻螺钉连接,通过改变弦杆钢管的尺寸以及钢管的间距可使其满足不同的承载力要求。

    The chord of small truss is cold-formed thin-walled square tube or rectangular tubes which are linked with standard v shaped clip and self tapping screws , the small truss can meet different carrying requirement by change pitch and section size of tube .

  7. 自攻螺钉抗剪连接破坏模式的有限元分析

    The finite analysis of self threading screw shear connection failure mode

  8. 卷边槽钢檩条的自攻螺钉连接节点刚度研究

    Research on Stiffness of Lipped Channel Purlin Joint Connected in Self-Tapping Screw

  9. 用自攻螺钉拧紧座椅轨罩。

    Tighten the seat rail cover with the sheetmetal screws .

  10. 自攻螺钉碳氮共渗黑色组织的产生及防止

    Dark Structure of Self-tapping Screw for Carbonitriding Process and Improvement

  11. 用自攻螺钉和间隔垫圈紧固前端。

    Fasten the front end with the sheetmetal screws and the spacer sleeves .

  12. 使用自攻螺钉和编号为168的滑锤套件。

    Using tapping screw and slide hammer kit no.168 .

  13. GB/T3098.11-1995紧固件机械性能自钻自攻螺钉

    Mechanical properties of fasteners & Self-drilling tapping screws

  14. GB/T9074.23-1988六角头自攻螺钉和大垫圈组合件

    Hexagon head tapping screw and big washer assemblies

  15. 可重新使用旧的自攻螺钉。

    The old self-tapping screws can be re-used .

  16. 自攻螺钉是当前世界上流行的轻结构新型紧固件。

    Tap bolts , as a popular kind of light fasteners , are widely used .

  17. 自攻螺钉、拉铆钉连接的受力蒙皮抗剪性能试验研究

    Experimental study on behaviour of stressed skin diaphragms connected by blind rivets and self-tapping screws

  18. GB/T15856.1-1995十字槽盘头自钻自攻螺钉

    Cross recessed pan head self-drilling tapping screws

  19. 自攻螺钉专用冷镦钢的开发

    The steel wire for tap bolts

  20. 自攻螺钉用螺纹牙型及圆滚模设计探讨

    Study on the Thread Profile of Self-tapping Screw and the Design of Round Thread Rolling Die

  21. GB/T9074.29-1988自攻螺钉组合件用平垫圈

    Small washer for tapping screw assembly

  22. GB/T16824.1-1997六角凸缘自攻螺钉

    Hexagon head tapping screws with collar

  23. 但是,自攻螺钉连接尚未应用于薄壁型钢檩条的连接中。

    Despite this , self-drilling screws connecting has not been applied to thin walled cold formed purlins .

  24. 本文分别对于两种连接类型&自攻螺钉连接和电阻点焊连接,拟合出强度、刚度的计算公式共计5个。

    In this dissertation , there are 5 formulas for self-tapping screw connection and resistance spot weld connection .

  25. GB/T5285-1985六角头自攻螺钉

    Hexagon head tapping screws

  26. 将前扰流板固定在束带上,用自攻螺钉和间隔垫圈固定。

    Affix front spoiler to the retaining strip and fasten it with the sheetmetal screw and spacer sleeve .

  27. 分析自攻螺钉生产过程出现的废品与钢质量的对应关系。

    To analyze corresponding relation between waster appearing in the course of producing of tapping screw and quality of steel .

  28. 自攻螺钉,纤维板螺钉,墙板螺钉,钻尾螺钉和各种不锈钢螺钉以及为各企业配套的机加工零件。

    Self tapping screws , chipboard screws , self drilling screws , all kinds of stainless steel screws , supporting machining parts .

  29. 重点介绍了自攻螺钉连接、模塑后嵌入的嵌件连接,卡入连接等较新的连接技术。

    It mainly introduces a new joint technology of self & tapping screw , insert joint after injection molding , snap joint , etc.

  30. 冷弯薄壁型钢组合楼盖是由冷弯薄壁型钢楼盖梁与定向刨花板通过自攻螺钉连接而成的一种轻型组合楼盖。

    Cold-formed steel floor is a lightweight composite structural system consisting of cold-formed steel joists connected to oriented standard board by self-drilling screws .