工件表面

MATLAB的平磨工件表面三维模型仿真方法

MATLAB-based simulation method of surface 's three-dimensional model in grinding process

SEM测量微细工件表面粗糙度的一种方法

The Use of SEM in Micro - Surface Roughness Measurements

利用CCD测量工件表面应变的研究

Study on Using CCD to Measure the Surface Strain of the Workpiece

提出用工件表面Hilbert谱进行加工误差诊断的方法。

The Hilbert spectrum is applied to the processing error diagnosis .

对所获取的工件表面的轮廓测量数据，用B样条曲面拟合，给出了截面数据的B样条拟合算法。

The method of knot vector determination in the processs of surface fitting is presented and the algorithm of B-spline surface fitting for profile data is given .

提出了一种利用CCD图像传感器来检测工件表面质量的方法。

A new method which is used to measure the workpiece surface quality by CCD image sensor is introduced .

ZrO2陶瓷激光加热辅助切削工件表面性能的研究

The Study on the Surface Properties after Laser Assisted Cutting for ZrO_2 Ceramic

工件表面的塑性变形在刀具磨损整个过程中都会发生，加工表面白层在刀具后刀面磨损剧烈时产生，但X射线分析没有发现相变。

Surface plastic deformation always occurs during the whole tool wear process . The drastic wear of the flank surface on cutting tool produces white layer in workpiece surface .

以NiSO4为施镀主盐，次亚磷酸钠为还原剂研究了化学镀法在工件表面获得良好性能的NiPZrO2镀层的工艺。

Using NiSO_4 as dissolving salt , NaH_2PO_4 as reductant in the solution , the process of electroless plating of Ni-P-ZrO_2 alloy was studied .

而化学机械平面抛光（CMP）技术是借助机械磨削和化学腐蚀的共同作用而使工件表面形成光洁平坦平面。

But CMP technology can obtain the glabrous and smooth plane in virtue of mechanical grinding and chemical eroding .

研究了工件表面图像加工纹理角度自动校正方法。重点研究了利用FFT方法提取加工纹理间距参数的方法。

Studies the angle-autocorrection method for the workpiece 's process texture , and emphasizes the measurement to pick-up process texture distance parameter by using FFT .

结果表明，使用Ansys和试验值是吻合的，说明使用有限元方法模拟工件表面温度场是可靠和可行的。

The results show that there are good correlations between the values and it is reliable and feasible to simulate and predict the temperature distribution using FEM software Ansys .

PCD刀具金刚石砂轮刃磨表面质量及其对加工工件表面质量的影响

Surface Quality of PCD Cutting Tool Grinded with Diamond Wheel and Its Effect on Machining Surface Quality of Workpiece

通过概念设计和反求工程中的三维扫描可以建立物体的三维CAD模型，并着重讨论了工件表面点三维数据的获取方法及数据点云的处理，STL文件的格式、精度、分割与拼接。

3D model is built by concept design and reverse engineering , It discusses on methods of obtaining 3D data and dealing with data cloud , as well as format of STL file .

并对半固着磨具加工的工件表面进行了高分辨率的AFM和SEM分析测试，未发现微小裂纹存在，但有类似金属切削的塑性流动产生。

The high resolution AFM and SEM were used to test the workpiece surfaces that were processed by SFAP , the microcracks were not found and the plastic flow similar metal-cutting were found .

本文提出了一种新的加工烧伤定量评价方法，即采用工件表面烧伤的CCD图像对烧伤进行定量评价。

In this paper , a new approach based on CCD image of the burned work-surface is proposed to evaluate the burn quantitatively , and the feasibility is discussed . The process of the quantitative evaluation is shown .

利用VC++与MATLAB联合开发了工件表面烧伤度分级系统。

In combination of the percentage burn area and the burn degree expression , the whole machining burn degree of the workpiece is discriminated . ( 5 ) The grading system of the workpiece surface burn is developed by VC + + and MATLAB .

在MIG焊接过程中，当焊枪喷嘴与工件表面的距离发生变化时，如何保证焊接弧长的稳定是焊接自动化领域研究的重要课题之一。

To keep the stability of welding arc is an important task in welding automation field , when the distance between the welding torch muzzle and the surface of the work piece changes .

通过Marching-Cubes方法提取数控加工仿真工件表面模型并进行图形显示，提高了显示质量和显示速度。

Marching cube algorithm is applied to extract the surface model of machined workpiece , and then was displayed with drawing patterns . The display quality of the machined workpiece and display speed are improved .

电火花加工工件表面粗糙度的评定与测试

Evaluation and Determination of Roughness of Work Piece Machined by Sparking

线切割加工工件表面质量的影响因素

The Influence Factors of Surface Quantity of a Workpiece in WEDM

工件表面沟槽深度对漏磁场的影响

Effect of slot depth in workpiece surface on magnetic leakage field

基于表面成型系统的工件表面形貌仿真

The Simulation for Turned Surface Topography Based on Surface Shaping System

大工件表面强化炉内重熔工艺的相似理论

Analogue Theory About Furnace Fusing Technology of Large Hard-faced Work Pieces

超声振动磨削对工件表面粗糙度的影响

The Influence of Ultrasonic Vibration Grinding Process on the Workpiece Surface

计算了熔滴的飞行速度和对工件表面的冲击力。

The droplet flying velocity and its impact force are calculated .

高速铣削参数对工件表面质量的影响

The Influence of High Speed Milling Parameter on Workpiece Surface Quality

剪切面边界条件对工件表面层加工硬化深度的影响

Effects of Shear Plane Boundary Condition on Depth of Surface Work hardening

显微自动调焦系统的研究及其在工件表面纹理分析中的应用

Research of Auto-Focusing System in Microscope and Application of Workpiece Texture Analysis

重点介绍精车后工件表面的完整性，以及精车时的刀具设计。

Parts surface integrity after finishing and finishing tool design are introduced .