高抗冲聚苯乙烯

利用HAAKE流变仪的D100/300测量系统，对聚苯乙烯/苯乙烯（PS/St）、高抗冲聚苯乙烯/苯乙烯（HIPS/St）及甲基硅油/环已烷等体系的流变行为进行了测定。

The rheological behaviors of polystyrene / styrene ( PS / St ), high impact polystyrene / styrene ( HIPS / St ) and polydimethyl siloxanes ( PDMS ) / cydohexane solutions were measured by HAAKE type rheometer D100 / 300 system .

高抗冲聚苯乙烯预聚体中两相的流变特性

Rheological Behavior of the Two-phase in the High Impact Polystyrene Prepolymer

纳米TiO2/高抗冲聚苯乙烯耐候型复合材料研究

Study on Rutile nano-TiO_2 / high-impact polystyrene weathering composite

用BR9002生产高抗冲聚苯乙烯

Production of high impact polystyrene using br 9002

高抗冲聚苯乙烯的研制Ⅲ.橡胶粒径分布及其对HIPS性能的影响

Research and Preparation of High-impact Polystyrene ⅲ . Influence of Rubber Particle Distribution on HIPS Properties

利用金红石型纳米TiO2优异的紫外线屏蔽性能，采用熔融共混法制备了纳米TiO2/高抗冲聚苯乙烯（HIPS）复合材料。

Due to excellent ultraviolet shielding function of nano-rutile-TiO_2 , nano-TiO_2 / HIPS composite was obtained by melt-blending technique .

采用本体-悬浮法研究了高抗冲聚苯乙烯（HIPS）所用橡胶的结构及工艺条件对产品性能的影响。

The effect of rubber structure and process conditions on HIPS properties in bulk-suspension process was studied .

本研究以高抗冲聚苯乙烯（HIPS）为主要研究对象，采用聚合物熔融插层的方法制备了HIPS/OMMT纳米复合材料。

In this thesis , HIPS / OMMT composites ( PLS ) were prepared by the melt intercalation approach .

本文用甲苯/丁酮混合溶剂对四种国产高抗冲聚苯乙烯（HIPS）进行了溶解&离心分离；

Four HIPS materials made in China were dissolved & centrifugalized with toluene / methyl ethyl ketone mixed solvent ;

高抗冲聚苯乙烯塑料用SZ系列涂料

SZ coatings series for hips plastics

研究了纳米TiO2粒子在高抗冲聚苯乙烯（HIPS）/纳米TiO2复合材料中的分散及纳米TiO2对复合材料光老化性能的影响，探讨了复合材料的光老化机理。

The dispersion of TiO 2 nanoparticles , mechanical properties , light aging properties and light aging mechanism of HIPS / nano-TiO 2 composites were studied .

综述了聚苯乙烯（PS）的发展历史，高抗冲聚苯乙烯（HIPS）的工业生产方法和HIPS改性的发展趋势。

The development history of polystyrene ( PS ), the industry production method of high-impact polystyrene ( HIPS ) and the trend of modification of HIPS were introduced .

采用不同类型和不同用量的无卤阻燃剂与高抗冲聚苯乙烯（HIPS）熔融混合，制得无卤阻燃HIPS。

When the HIPS is blended and melted with different kinds and amount of non-halogen flame retardant , the non-halogen inflaming retarding HIPS is to be manufactured .

本文介绍了具有光和生物双重降解功能的高抗冲聚苯乙烯（HIPS）片材的研制过程及光-生物双降解HIPS发泡快餐盒试产品的性能和经济效益。

The paper introduces the development of photo / biodegradable HIPS sheets and the properties and economic profits of foamed snack container of photo / biodegradable HIPS , sheets .

用双螺杆挤出共混法制备了高抗冲聚苯乙烯（HIPS）有机蒙脱土（OrgMMT）插层纳米复合材料以及HIPS无机蒙脱土（MMT）常规复合材料。

High-impact polystyrene ( HIPS ) / organomontmorillonite ( Org-MMT ) nanocomposites and HIPS / inorganic montmorillonite ( MMT ) conventional composites were prepared by melt processing using a twin-screw extruder .

研究含纳米蒙脱土的高抗冲聚苯乙烯（HIPS）的制备工艺，测试了试样的冲击强度和拉伸强度等力学性能，观察了试样冲击断面的结构形态。

The synthetic method of HIPS inserted nano-MMT was studied , the impact strength and the tensile strength of the sample were measured , the structure appearance of the sample 's impact cross section was observed .

HT-IPS树脂的流动性能略差于高抗冲聚苯乙烯树脂，且随着K树脂用量的增加，其流动性能变差，K树脂用量应控制在15份以下；

The rheological property of the HT-IPS resin was slight inferior to that of high impact polystyrene resin , and decreased with the increase of the amount of K-resin . The amount of K-resin was controlled less than 15 phr .

采用本体接枝共聚法制备高抗冲聚苯乙烯（HIPS），测定反应动力学曲线，观察和分析相转变现象，并由此分析讨论搅拌条件对抗冲性能的影响。

HIPS was prepared by the method of bulk graft-polymerization . The polymerization kinetics curves were determined , and the phase inversion phenomenon was observed and analyzed . The influence of agitation conditions on impact properties of HIPS was then discussed .

采用锥形量热仪、极限氧指数法和垂直燃烧法研究了可溶可熔酚醛树脂（Novolac）和磷酸三苯酯（TPP）对高抗冲聚苯乙烯（HIPS）阻燃性能的影响。

It studied the influencing effects of triphenylphosphate ( TPP ) and Novolac on flame retardancy of high impact polystyrene ( HIPS ) by use of a cone calorimeter , limiting oxygen index ( LOI ) and vertical combustion test .

添加不同种类、不同数量的纳米蒙脱土，混炼制得HIPS/纳米蒙脱土复合材料，以改善高抗冲聚苯乙烯（HPS）的性能，测试了其力学性能、热稳定性及阻燃性。

To improve the properties of high-impact polystyrene ( HIPS ) , HIPS / nano-montmorillonite composites were prepared by mixing HIPS with different kinds and different amount of nano-montmorillonite at higher melting temperature . The mechanical properties , thermal stability and flame retardance of HIPS / nano-montmorillonite composites were investigated .

高抗冲聚苯乙烯家电专用料的开发及应用

Development and Application of HIPS Materials Special for Electrical Household Appliance

高抗冲聚苯乙烯熔体挤出流动特性的研究

Research on flow properties of high impact polystyrene melts in extrusion

高抗冲聚苯乙烯共混改性研究新进展

New Progress of Research on Blending Modification of High Impact Polystyrene

高抗冲聚苯乙烯的应变率敏感性及粘塑性本构关系

The strain rate sensitivity and viscoplasticity constitutive relation of high impact polystylene

低发泡高抗冲聚苯乙烯熔体的流变特性及成型工艺的研究

Study of the Rheological Behavior and Extrusion Process of Low Foamed HIPS

高抗冲聚苯乙烯废旧料高强改性再生技术

Recycling Technology of High Impact Polystyrene Waste by Reinforced Modifications

阻燃性高抗冲聚苯乙烯塑料的研究

Study and Preparation of Flame Retardent High Impact polystyrene Plastics

氢氧化铝表面改性及在高抗冲聚苯乙烯中的应用

Surface modification of aluminum trihydroxide and its application in high impact polystyrene

高抗冲聚苯乙烯专用橡胶的研究进展

Research Progress in Rubbers Special for High Impact Polystyrene

影响高抗冲聚苯乙烯力学性能的因素

Factors affecting mechanical properties of high impact polystyrene