首页 / 词典 / good

耐高温性

  • 网络high temperature resistance
耐高温性耐高温性
  1. 聚四氟乙烯(PTFE)具有优良的化学稳定性、耐高温性、低摩擦系数、介电频谱和温谱稳定性以及优异的电气绝缘性能,被广泛应用于航空和电气等领域。

    Polytetrafluoroethylene ( PTFE ) possesses good chemical stability , high temperature resistance , outstanding stability of dielectric properties versus frequency and temperature and excellent electrical insulating properties . As a result , the polymer ( PTFE ) can be widely applied in aviation and electric field .

  2. 对氧化膜的外观、厚度、封闭质量、耐光照及耐高温性、耐醇性提出了检验要求。

    The test demands on appearance , thickness , sealing quality , light and high temperature resistance and alcohol resistance were suggested .

  3. 莱卡R涤纶机织物具有高强度和高伸长,耐高温性优良,并具有良好的平整度和手感,舒适的伸缩性及幅宽稳定等优点,提高了莱卡R在涤纶机织物上的使用价值。

    The application of Lycra R on PET woven fabric features high tenacity and extension , high temperature resistance , good evenness and touch , comfortable elasticity and stable width , so the application value is raised .

  4. 与单一的AAO模板相比,AAO/Ti/Si基体具有较高的硬度,较好的耐高温性。

    Compared with the single AAO templates , the AAO / Ti / Si substrates have the properties of good mechanical strength and durability against heat treatment at higher temperature .

  5. 聚苯并恶唑-酰亚胺(polyimide-benzoxazole,PIBO)是聚酰亚胺(polyimide,PI)高分子聚合物的一种,具有优异的耐高温性和耐化学性,除此之外,还具有优异的机械性能和电性能等。

    Poly ( imide-benzoxazole ) is a kind of heterocyclic polymers that exhibit excellent thermal stability and superior chemical resistance . Besides these , they also have high mechanical properties and good electrical properties .

  6. 实验表明,BMI/PF树脂(简称EF)具有优良的耐高温性,其最高分解温度由591℃提高到了637.9℃,并且高温阶段的热失重率变小。

    The results showed that BIM / PF composite material had excellent high temperature resistance that the highest decomposition temperature had been increased from 591 ℃ to 637.9 ℃, and the weight loss rate become smaller at the high-temperature stage .

  7. 各菌株在较高的温度下(≥35℃)发酵,菌株AY-15耐高温性最好;

    When all yeast fermented under high temperature (≥ 35 ℃), yeast AY-15 had the most excellent thermo-tolerance capability .

  8. 聚苯并恶唑-酰亚胺(polyimide-benzoxazole,PIBO)纤维具有优异的力学性能、耐高温性和耐化学性,被广泛用在高性能材料中。

    Poly ( imide-benzoxazole )( PIBO ) fiber exhibits high mechanical properties , excellent thermal stability and superior chemical resistance , so it has been widely used in high-performance applications .

  9. Ni-Al、Fe-Al等金属间化合物材料具有强度高,耐高温性好,导电、导热率高等优异性能,是理想的汽车尾气净化器载体和微粒捕集器过滤体材料。

    Ni-Al , Fe-Al intermetallic compounds possess high strength , high temperature resistance , good electrical conductivity and excellent thermal conductivity property ; porous material made from above intermetallic compounds will be an ideal vehicle exhaust purifier carrier and diesel particulate filter ( DPF ) substrate materials .

  10. 试验结果表明,该堵水剂成胶时间为8-24h,在200℃下,堵水剂能稳定17d以上,具有较好的耐高温性和稳定性。

    The experiment result showed that the gel time of the water-plugging agent was 8 - 24 h and it could exist more than 17 days under 200 ℃ . The water - plugging agent had good high temperature resistance and stability .

  11. 对杂交粳稻的耐高温性进行了研究。

    High temperature tolerance of hybrid japonica rice was studied .

  12. 讨论了原子灰附着性、致密性、耐高温性的评价方法;

    The evaluation methods of adhesion , compactness and high-temperature resistance of unsaturated polyester putty are discussed .

  13. 比较了耐高温性覆膜砂和易溃散性覆膜砂的性能。

    Based on the results , the feature of high-temperature coated sand and collapse coated sand was compared .

  14. 玄武岩纤维作为一种新型的硅酸盐纤维,具有高强度、高弹模、良好的耐高温性等优良特性。

    Basalt fiber is a new type of silicate fibers which is high in strength , elastic modulus and temperature resistance .

  15. 有机硅改性环氧树脂即能降低环氧树脂内应力,又能增加环氧树脂韧性、耐高温性等性能。

    Organic silicone modified epoxy resin can reduce the internal stress and improve the flexibility and heat resistance of epoxy resin .

  16. 根据观察结果初步提出了水稻新品种选育中鉴定品种耐高温性的简易方法。

    According to the results of observation poses primarily a simple method to evaluate the high temperature tolerance of rice on breeding .

  17. 与玻璃等刚性衬底相比,柔性衬底的耐高温性较差,电池的沉积温度不能太高,各层材料的沉积温度一般不应超过200℃。

    Flexible substrate has a poor heat resistance , so the deposition temperature should not be too high , commonly below 200 ℃ .

  18. 乳胶纸作为高品质砂纸生产基纸,要求具有较强的耐水性、抗溶剂性及耐高温性。

    As the base paper of high quality abrasive paper , the latex paper must possess the properties of water-proof , solvent and high-temperature resistance .

  19. 尤其是铝基复合材料,具有高比硬度、高比强度、耐高温性、高弹性模量以及优良的抗氧化性等突出优点,在工程中被认为最有前途的金属基复合材料。

    SiC particle reinforced aluminum alloy is a kind of special metal matrix composites with enhanced stiffness , strength , wear resistance , antioxidant ability and heat-resistance .

  20. 因其特殊的结构而具有极强的吸附性、流变性、悬浮性、抗盐性及耐高温性。

    Owing to the special structure , it has strong absorbency , rheologic behaviour , suspension property , resistance to salt , and resistance to elevated temperatures .

  21. 再经过高温处理后,铝粉颗粒表面平整度提高,同时使铝粉颜料的耐高温性和耐腐蚀性能提高。

    Then the enhance performance of the aluminum powder resistance to erode and to high temperature which have made by dealing the aluminum pigment with high temperature .

  22. 耐高温性:陶瓷材料具有比金属材料和高分子材料高得多的熔点,决定了陶瓷材料优异的耐高温性。

    High temperature of : ceramic material than metal materials and polymer materials is much higher melting point , determined that ceramic materials with outstanding temperature resistance .

  23. 结果表明,在与适当的底漆配合使用下,该涂料具有优异的耐高温性及防腐蚀性能。

    The coating has not only the excellent heat resistance , but also good corrosion protective properties , and is suitable for corrosion protection and high temperature facilities .

  24. 与有机膜相比,无机膜具有良好的耐高温性和化学稳定性、机械强度大、抗微生物侵蚀、使用寿命长等优点。

    Compared with organic membrane , inorganic membrane has good resistance to elevated temperatures and chemical stability , high mechanical strength , erosion-resistant of microbe and long service period .

  25. 陶瓷材料具有良好的化学稳定性、耐高温性、尺寸稳定性、光漫反射特性等优点,在大功率激光器上有较好的应用前景。

    Ceramic materials have the advantages of good chemical stability , high-temperature resistance , size stability and light diffuse reflection . It has good application prospects in high-power laser equipment .

  26. 采用分子量适中的环氧树脂对反应性有机硅低聚物进行共聚改性,充分利用有机硅树脂的耐高温性和环氧树脂的防腐性及高附着力。

    An epoxy modified silicone resin , which had the features of epoxy and silicone resins , was prepared by the polymerization of epoxy resin with compatible and reactive silicone oligomer .

  27. 石墨材料作为早期蒸镀金属的蒸发源材料,具有许多优良的性质,如良好的耐高温性、热稳定性,良好的导电性,较好的抗热震性能等。

    Graphite which was used as evaporation source in early metal evaporation industry has excellent properties , such as excellent thermal conductivity , low resistivity , good resistance to thermal shock .

  28. 对这种固体缓蚀阻垢剂在水中溶解性、分散性、耐高温性、缓蚀效率、阻垢效率进行了研究分析,并从电化学的角度研究了它在金属表面的吸脱附行为。

    A Solid Corrosion and Scale Inhibitor with High Temperature Resistance And its properties such as dissolution and dispersion ability in water , high temperature resistance , scale and corrosion inhibition efficiencies were studied .

  29. 针对电站燃煤锅炉袋式除尘器滤料的长期耐高温性和运行阻力较高的问题,着手研发高效低阻滤料。

    To solve the problem of long term high operating temperature and resistance of filter media , set about researching and developing a new compound filter with performance of higher efficiency and lower resistance .

  30. 堇青石载体的脆性大,强度低,使用寿命低。金属载体的强度高,但耐高温性差,且制备工艺复杂,催化剂涂层附着力差。

    Cordierite carriers show high brittleness , low strength , and short life , and the metal carriers show high strength , but poor high temperature resistance and complicated fabricating process , poor adhesion of catalyst coating .