油压

抗压强度，耐压强度strength油压强度试验

Compressive strength , compression strength oil pressure test for

环冷机风箱结构对球团矿抗压强度影响之初探strength油压强度试验

On the Influence of Wind Box Structure of Circular Cooler on Pellets Compression Strength oil pressure test for

经检查发现，主要原因是注油器扩散管汽蚀，以致注油器工作不正常，润滑油压偏低

The main reason is that cavitation erosion occurred in pervasion pipe of lubricator .

用PC来实现液压泵站控制系统的油温油压自动控制

Automatic Control of Oil Pressure and Oil Temperature with PC

一种GIS集中供气系统油压异常的处理及日常维护

Oil-pressure Erroneous Alarm Treatment of Centralized Gas Supply System in a Type of GIS and Its Routine Maintenance

可变凸度轧辊（VC辊）在不同油压下的凸度分布曲线

Crown distribution of variable crown roll ( VC roll ) at different oil pressure

SS8&系油压减振器仿真系统的研究

Research of Simulating System on the Primary Absorber of SS_8 Locomotive

发电机组EH油压低的故障处理

Trouble Handling of Low EH Oil Pressure in Power Generating Unit

SS8一系油压减振器仿真软件的开发

Research of Simulation Software on SS_8 Primary Oil Absorbers

并指出了该ABS部件内压力吸收总成不能引起制动器中油压持续振荡的原因。

Finally , why this ABS can not keep a continuous surge in braking fluid is explained .

广东罗定电厂1号机组EH油压低故障的处理

Handling of EH Oil Pressure Low Failure Occurring to No.1 Unit in Guangdong Luoding Power Plant

A/D模块我们用DSP自带的A/D模块，实现水温，油压的测量。

A / D module we use the A / D module in the DSP and measure the temperature of water and pressure of the oil .

8000t油压机横梁的CO2半自动焊

Semiautomatic co_2 arc welding for cross beam of 8000t oil press

基于InTouch组态软件的油压机监控装置的设计与应用

The Application of Configuration Software-InTouch in the Monitoring Device of Hydraulic Press

两种模糊PID油压控制方法在GD-1高压共轨柴油机上的应用和比较

Investigation and Comparison of Two Fuzzy PID Control Methods on the Injector Pressure of GD-1 High Pressure Common Rail Diesel Engines

马钢5000t油压机横梁铸钢件的工艺分析及生产

Study on Foundry Technology of Upper Beam Steel Casting of 5000t Oil Press

本文介绍了PLC在水轮机组油压装置电气控制系统中的应用，主要讨论了系统的应用背景、系统的构成以及相应的软件设计、硬件设置。

This paper presents the application issue of PLC on electrical control system of oil pressure unit of hydraulic turbines . The background , system structure , software designing and hardware setting are discussed in detail .

通过PLC与计算机通信的方式，采集焊接过程中的电压、电流、位移、油压等参数，并能够进行多套焊接工艺参数的设定、修改和存储。

In this system , some parameters of welding process such as welding current , welding voltage can be collected by the Industry Computer , and welding processing parameters can be set , modified and saved .

6K型机车垂向油压减振器-bpy作为螯合配体只能得到结构均为二帽二支撑型的同构化合物5-7。

Vertical Hydraulic Damper Used on 6K Locomotive - bpy , are used .

160t油压机液压系统的设计与改造

The Hydraulic System Design and Reform of 160t Oil Press

V型气缸布置、每缸4气门结构、水冷系统、整体曲轴与滑动轴承、弹簧油压自动张紧器以及蓄电池数字点火控制等结构特点均体现了该发动机卓越的设计水平。

The V-type cylinder 、 four valves structure per cylinder 、 coolant system 、 integral crankshaft and slide bearing 、 spring-hydraulic pressure automatic tensioner and accumulator-digital ignition control and so on all reflect its excellent technology in design .

Gd-1高压共轨式柴油机共轨油压控制的试验研究

Experimental Investigation on the Injection Pressure Control of Gd-1 High Pressure Common Rail Diesel Engine

3000T油压机液压系统技术改造方案的探讨

Alteration of 3000T Hydraulic Pressure System

建立了某综合传动装置可闭锁式液力变矩器3种不同工作状态的数学模型及闭锁离合器的控制油压充放油模型，应用Matlab软件建立了仿真模型。

Mathematical models under three different work conditions are established for lockable hydraulic torque converter in a compound drive device and oil charging and returning model for control fluid is also set up . Simulation model is formed with Matlab software .

350MW汽轮机润滑油压低的原因及处理

The Causes and Treatment on Low Lubricating Oil Pressure of 350 MW Steam Turbine

两个凸轮凸角之间的切换系统，是通过ECU对引擎的油压、温度、行驶速度、引擎转速和节油门位置的综合计算，而实现对其的控制的。

The switching operation between the two cam lobes is controlled by the ECU which takes account of engine oil pressure , engine temperature , vehicle speed , engine speed and throttle position .

用1500吨油压机生产φ350mm石墨电极

Pilot-plant production of φ 350mm graphite electrode with hydraulic extruder of 1500 tons

阐述了矿井提升机制动力矩倍数K与提升系统质量系数μ的关系，探讨了K值的选取和液压盘式制动系统油压的整定方法。

This paper elaborates the relation between K & the multiple of the brake torque of mine hoist and the mass coefficient μ of hoisting system . The way chosen of the K value and rectification of oil pressure of hydraulic disc brake system have been discussed .

272F汽油机低油压安全保护装置

The protecting device of 272F gasoline engine with lower oil pressure

UH-3000型油压夯管锤研制及其工艺试验

Development of UH-3000 Hydraulic Pipe Rammer and Testing of Its Process