模塑料

介绍了酚醛模塑料、酚醛树脂复合材料及固化机理研究方面的技术进展。

Advance of phenolic moulding compound , composite and its curing mechanism was introduced .

我国电工用不饱和聚酯模塑料的质量现状及存在问题

The state of quality and existential problems of unsaturated polyester moulding compound for electrical insulation

PMMA模塑料流变性能与挤出制板技术研究

Studies on rheological properties and extruding plate technology of PMMA molding powder

PMMA模塑料的流变性能研究

A Study of Rheological Property of PMMA Molding Powder

采用热模压法制备了环氧模塑料（EMC）。

The epoxy molding compounds ( EMC ) was prepared by hot pressing molding method .

因此所得结论对PMMA模塑料挤出制板工艺有一定的指导意义。

Therefore , the conclusion would be useful and important for the extruding process of PMMA plate .

FX系列酚醛玻璃纤维模塑料部标准验证报告

Test report for ministry standards of FX series molding phenol

PVC-U异型材模塑料的生产

Production of Moulding Materials for PVC - U Profile

结果表明，不同粒径的硅微粉级配填充到模塑料中可大大提高到EMC的流动性。

The results showed that the matching filling of different silica with different particle size can improve the flowability of EMC greatly .

本文对引线框架铜合金表面氧化物生长动力学、形貌、成分及铜合金与环氧树脂模塑料（EMC）黏结强度进行了研究。

The growth dynamics , morphology , composition of oxide on copper alloys are investigated , the adhesion shear strength of mound component on copper alloys is also studied .

基于Box-Jenkins法对玻璃纤维增强模塑料老化预测的模型研究

Use Model of Box-Jenkins Method Estimate and Study the Aging of the Glass Fiber Reinforced Plastics

本文应用时间序列分析里的Box-Jenkins法对玻璃纤维增强模塑料老化进行预测。

In this article , Box-Jenkins Method is applied to forecast the aging of the glass fiber reinforced plastics .

介绍了FX系列模塑料部标准验证试验情况和新标准采用的试验方法和技术要求，对验证试验数据进行了分析。

This article introduces the test process of FX series molding plastics in drafting ministry standards , the test methods and specifications of new standards , analyses the test data .

注射型耐热酚醛模塑料EA-5555J及其应用

Injection type phenolic molding compound ea-5555j with heat-resistance and its application

结果表明，对于酚醛片状模塑料，B2O3和ZnO的混合体系是较好的增稠剂；

The results show that the mixture of B 2O 3 and ZnO are the proper thickening agent of phenolic sheet molding compound and the suitable thickening effect can be achieved .

针对当前点火电器塑料件存在的问题，研制出新型点火电器用DMC模塑料，实测各项性能指标达到国家标准要求。

To counter the question existing in plastic products of igniting electrical apparatus at present , the new DMC for igniting electrical apparatus is developed . All the performances met the requirements of National Standard .

环保氨基模塑料EA-7709J工艺及应用

Application and Technology of Environmental Protection Type Amino Molding Compound EA-7709J

环保型氨基模塑料EA-7709J的研制

Preparation of Environmental Protection Type Amino Molding Material EA - 7709J

研究了将导电聚吡咯（PPy）薄膜制备在绝缘环氧模塑料（EMC）电子封装材料表面的方法，及导电PPy薄膜的电磁屏蔽效能。

The method of polypyrrole ( PPy ) films being synthesized on the surface of insulating epoxy molding compound ( EMC ) electronic packaging materials and the shielding effectiveness of PPy film were studied .

研究了聚砜改性酚醛树脂玻纤增强模塑料在200℃、230℃，时间为500h的热老化过程中所发生的力学性能变化情况。

Mechanical properties of polysulfone modified phenolic resin reinforced with glass fiber during heat ageing of 500 hours at 200 ℃ and 230 ℃ are mainly discussed .

本文研究了玻璃纤维（GF）及玻纤与棉纤（CF）混杂纤维（GF/CF）增强酚醛模塑料的制备工艺、结构形态及性能。

In this paper , the preparation , structure and properties of the phenolic molding compounds reinforced with glass fiber ( GF ) and glass fiber / cotton fiber ( CF ) hybrid fibers ( GF / CF ) were studied systematically .

通过测试拉伸强度和氧指数，确定了高阻燃片状模塑料的最佳配方组成，并对ATH实现高阻燃效果进行了分析。

The best components of high flame - resistance SMC were confirmed by testing tensile strength and oxygen index , and analysed the mechanism on high flame resistant effect of ATH .

产品质量用模塑料片状料光亮外观和模塑料拉西格流动性80～120mm控制。

Quality of the product is controlled by bright outward appearance of sheet material of moulding material and Raschig flow property 80 ~ 120 mm of moulding material .

本文主要研究了块状模塑料（BMC）的各种原料和其模压成型工艺参数对BMC材料力学性能的影响规律，并测定各种原料对BMC的流动性能的影响。

This paper studied the influence of various stuff of BMC and process parameter of pressure moulding on the mechanical property of BMC and discussed the influence of various stuff of BMC on the flowing property of BMC .

介绍了热固性团状模塑料（BMC）注射成型汽车前照灯反射镜的工艺过程，确定了BMC注射成型的料筒温度、螺杆转速、注射压力、注射速度和保压时间等工艺参数。

The injection molding process of thermoset plastics bulk molding composition ( BMC ) made of automobile lamp reflector is presented in the paper . Process parameters are settled such as barrel temperature , screw speed , injection pressure , injection velocity and holding time and so on .

产品性能达到酚醛模塑料（PF2A1）国家标准或优良，原料成本比苯酚-甲醛模塑料（PF2A1）低20.4%。

The properties of the product meet the national standard of phenolic moulding material ( PF2A1 ) . Compared with the phenol-formaldehyde moulding materials ( PF2A1 ) , the product has 20 . 4 % less raw material cost and more competitive .

低压片状模塑料纤维分布与模内粘度控制

Fiber Dispersion & Molding Viscosity Control of Low Pressure Molding Compounds

涤纶碎布增强三聚氰胺&甲醛模塑料的研制

The Development of Dacron Oddments Reinforced Melamine & formaldehyde Moulding Material

GB/T5471-1985热固性模塑料压塑试样制备方法

Preparation method for compression moulding of specimens of thermosetting moulding materials

GB/T5472-1985热固性模塑料矩道流动固化性试验方法

Test method for rectangular flow cure properties of thermosetting moulding compounds