材料力学

基于Matlab的材料力学电算法

Computator Methods for Mechanics of Materials with Matlab

Matlab在材料力学超静定问题求解及梁变形可视化中的应用

Application of Matlab in Mechanics of Materials for Solving Statically Indeterminate Problem and Visualizing Beam Deformation

应变率对Cf/Al金属基复合材料力学性能的影响

Effect of Strain Rate on Mechanical Behavior of C_f / Al Composites

关于｛x／n｝的分布组分梯度复合对水泥基材料力学性能的影响

Effect of the component gradient distribution on the strength of cement-based composite materials

SiCP/Al复合材料力学性能及显微结构分析

Mechanical properties and microscopic analysis of SiC_P / Al composites

热循环对挤压态SiCw/AZ91镁基复合材料力学性能的影响

The thermal cycling on mechanical properties of extruded sic_w / az91 Magnesium Matrix Composites

HDPE基木塑复合材料力学性能的研究

Research on the Mechanical Properties of Wood-Plastics-Composite Based on HDPE

MoS2对镍基复合材料力学性能的影响

Mechanical properties of Ni-based alloy / W / MoS_2 composites

TiC复合添加剂对铁基粉末冶金结构材料力学性能影响的研究

The effect of TiC composite additive on mechanical properties of PM ferrous structural materials

通过常压烧结制备了Al2O3/Y-TZP复相陶瓷，研究了Al2O3含量对材料力学性能及耐磨性的影响。

Al_2O_3 / Y-TZP composites were prepared by pressureless sintering . Effects of material composition on mecha ?

ZA22/Al2O（3f）复合材料力学性能的神经网络模拟研究

Neural Network Simulation on Mechanical Properties of ZA22 / Al 2O 3f Composites

SiC晶须含量对ZTA陶瓷基复合材料力学性能和抗热震性能的影响

Effect of SiC Whisker Content on Mechanical Properties and Thermal Shock Resistance of ZTA-Matrix Composites

莫来石晶种对反应烧结ZrO2/莫来石复合材料力学性能的影响

Effect of Mullite Seeds on Mechanical Properties of Reaction-Sintered ZrO_2 / Mullite Composites

研究了表面己内酰胺稳定化并阴离子接枝PA6的CF对PA6/CF复合材料力学性能与破坏形态的影响。

The effect of surface treating on the mechanical properties and failure morphology of PA6 / CF composites was investigated .

采用PA6短纤维在较低掺量情况下对水泥基材料力学性能及耐久性进行了研究，并与Nycon纤维进行对比。

In this paper , the mechanical properties and durability of cement matrix material with low content of PA6 fiber were investigated .

研究了基体韧性、纳米CaCO3直接填充与用CPE包覆后填充PVC对复合材料力学性能的影响，并对其微观结构进行了探讨。

Influences of matrix ductility , nano CaCO 3 and CPE encapsulated nano CaCO 3 filled PVC on the mechanical properties of the composite were studied .

连续相组分梯度分布对水泥基材料力学性能的影响结果表明：PMMA组分呈从膜表面到底面逐渐增多的梯度分布。

Effects of continuous component gradient distribution on mechanical strength of cement-based materials as the result , pmma aggregated to the bottom of the film .

重点探讨了Mg（OH）2与复合阻燃剂的阻燃效果及其对LLDPE/EPDM复合材料力学性能、加工性能的影响。

The flame retardant effect of Mg ( OH ) _ 2 and compound flame retardant on LLDPE EPDM system , as well as their influence on the mechanical property and processability were emphatically investigated .

介绍了基于VRML的材料力学性能检测虚拟实验的设计思想和设计原理，对关键技术进行了阐述和分析。

The design idea and elements of a VRML-based virtual experiment for material mechanical performance testing is introduced . The key technology is analysed and expatiated .

利用碳纳米管（CNTs）对酚醛树脂（PF）进行改性，研究了CNTs含量对PF/碳纤维（CF）复合材料力学性能的影响。

Phenolic resin ( PF ) is modified by carbon nanotubes ( CNTs ), and the effects of CNTs content on the mechanical properties of PF / carbon fiber composite are studied .

根据高等材料力学的知识推导了弹性铰链的刚度公式，并利用有限元软件ANSYS进行了铰链刚度校核和应力校验。

Stiffness formula of flexible hinges was derived according to the knowledge of advanced mechanics of materials . And the check for hinge stiffness and the test of stress were carried out by means of finite element software ANSYS .

研究了纳米SiO2在环氧树脂中的均匀分散工艺，探讨了超声波振荡和超声波分散时间对纳米SiO2/EP复合材料力学性能的影响，确定了最佳分散工艺。

In this paper , the uniform dispersion of nanometer-SiO_2 in epoxy resin was studied . The influence of ultrasonic-wave oscillations and ultrasonic dispersion time on the mechanical performances of nanometer-SiO_2 / EP composite was discussed .

讨论了线性Mohr-Coulomb屈服准则和Drucker-Prager屈服准则及其在工程计算中的应用。给出了线性Mohr-Coulomb准则在材料力学及岩石力学中的不同表达形式之间的关系；

This paper addresses the linear Mohr-Coulomb yield criterion and Drucker-Prager yield criterion , and the relation among the linear Mohr-Coulomb criteria in material mechanics and rock mechanics .

回火温度对18-18-N护环材料力学性能的影响

The Effect of Tempering on Mechanical Properties of Retaining Ring Material 18-18-N

采用SEM、TEM、DSC及材料力学性能实验方法研究了马来酸酐（MAH）接枝乙烯-辛烯共聚物弹性体（POE）对PA66/POE共混材料形态、微结构及力学性能的影响。

The effect of maleic anhydride ( MAH ) grafted POE ( Polyolefin Elastomer ) on the morphology , microstructure and mechanical properties of PA66 / POE blends was investigated by means of SEM , TEM , DSC and mechanical properties measurement .

考察了竹纤维含量、改性MPP用量和共聚物基体种类及含量对复合材料力学性能的影响，并采用扫描电镜分析了其界面形态。

The effect of bamboo fiber contents , the modified MPP contents and copolymer polypropylene type on the mechanical properties of composite sheets were investigated , and the interfacial characterizations of the composites were analyzed by SEM .

基于现场采样管段的材料力学性能测试资料和焊缝缺陷检测资料，采用FAD方法对某含360°内表面裂纹管道的剩余强度进行了评价。

Based on material properties of the field sampled section of pipeline and dimensions of inspected weld-ment defects , the auther analyzed the remaining strength of certain pipeline containing 360 ° circumferential internal surface crack with FAD method .

用刚性无机粒子硅-铝（Si-Al）空心球填充增强聚丙烯（PP），研究了Si-Al空心球的含量、粒径及偶联剂对PP/Si-Al空心球增强材料力学性能的影响。

This paper investigated the effect of the content of the cenosphere , the particle size and the coupling agent on the mechanical properties of Si-Al cenosphere / PP reinforcing materials , and PP is reinforced by the Si-Al cenosphere .

设计正交实验确定AA-g-IPC熔融接枝条件对椰壳纤维/IPC复合材料力学性能的影响。

Orthogonal design was designed to determine the influence of grafting parameters on properties of coir / IPC composites .

玻璃纤维增强氯氧镁复合材料力学性能研究

Study on Mechanical Property of Glass Fiber Reinforced Magnesium Oxychloride Composites