文件解压

  • 网络unzip
文件解压文件解压
  1. 将整个ZIP文件解压到一个空目录下。

    Unzip the entire ZIP file into an empty directory .

  2. 文件解压后,您会看到DeveloperWorks目录下包含以下子目录

    After you unzip the file , you should see a DeveloperWorks directory containing the following subdirectories

  3. 将包含了此AuditExtension应用程序的zip文件解压到一个适当的临时位置。

    Unpack the zip file containing the Audit Extension application to a suitable temporary location .

  4. 如果是这种情况,则必须将档案文件解压到您的eclipse目录中。

    If this is the case , you must extract the archive file into your eclipse directory .

  5. zip文件解压后将创建目录C:/APISample/ImportFile。

    The zip will decompress creating the directory C : / APISample / ImportFile .

  6. 将本文提到的文件解压并将内容复制到Apache服务器的根目录。

    Extract the file that comes with this article and copy the contents to the htdocs directory of the Apache server .

  7. 接着,将归档文件解压到临时目录中,从临时目录将所有插件目录内容都移到Eclipseplugins子目录。

    Next , uncompress the archives into a temporary directory and move all plug-in directory content from there to the Eclipse plugins subdirectory .

  8. 将zip文件解压之后(在我的系统上解压后的目录并没有大多少,只有412MB),执行可执行文件setup。

    Once the zip file has been inflated ( on my system the inflated directory was not much larger & only412MB ), execute the setup executable .

  9. 税银联网系统采用了大量的基于网络的数据处理技术,包括Socket数据传输和加密、FTP数据传输、文件解压、多线程处理等关键技术。

    The Tax-Bank Networking System adopts many data processing technical based on data transporting in network . Such as socket communication technical , FTP data transporting technical , file decompression technical , multithreads technical .

  10. 下载ssvnc(见参考资料)之后,把文件解压到C:驱动器上的顶级目录。

    After you download ssvnc ( see Resources ), unzip the file into the top-level directory on your C : drive .

  11. 把存档文件解压到您选择的目录中。

    Unzip the archive to the directory of your choice .

  12. 将下载来的文件解压至你的硬盘。

    Unzip the downloaded file to a folder on your hard drive .

  13. 下载之后,将所有文件解压到您刚才建立的目录下。

    When the download completes , extract all files to the direct directory you just created .

  14. 将文件解压到根文件系统分区(这可能需要一点时间)

    Unpack files to the root file system partition ( this command may take some time )

  15. 如果您将该文件解压到根目录,则可以跳到下面的第5步。

    If you unzipped the file to the root , you may skip to step 5 below .

  16. 下载了所需要的组件之后,下一个步骤就是将每个文件解压。

    Once you have downloaded what you need , the next step is to unzip each file .

  17. 修正:尽可能小的内存泄漏(100字节),对丢失文件解压/转换错误。

    Fixed : Possible small memory leak ( 100 bytes ) on missing file decompression / conversion errors .

  18. 创建一个名为common/ionic的新目录并将下的.zip文件解压到其中。

    Create a new directory named common / ionic and extract the downloaded . zip file into it .

  19. 将下载文件解压到磁盘上的一个文件夹(下面将这个位置称为[dir])。

    Extract the distribution to a folder on your disk ( referred to as [ dir ] from now on ) .

  20. 下载之后,把压缩(.zip)文件解压到容易记住的位置。

    After downloading it , extract the compressed ( . zip ) file to a location that is easy for you to remember .

  21. 或者,也可以从下载部分下载源文件,解压,并在浏览器中打开outsidein.html文件。

    Or , you can download the source files from Download , unzip it , and open the outside_in.html file in your browser .

  22. 对ZIP文件进行解压,就会看到许多目录。

    Expand the ZIP file and you will see a number of directories .

  23. 将文件内容解压到G2的模块目录下。

    Extract the contents of the file to the modules directory of you G2 install .

  24. 对CAS服务器ZIP文件进行解压,并使用Ant构建脚本构建CAS服务器软件。

    Expand the CAS server ZIP file and then build the CAS server software using the supplied Ant build script .

  25. 下载回来的SDK是一个简单的ZIP文件,解压到你硬盘中任何方便的位置,最好放到离其他开发工具近的地方。

    Once retrieved , the SDK is simply a ZIP file , easily unpacked into a convenient location on your hard drive , preferably someplace close to the other development tools in your life .

  26. 通过直接读取AVI格式的文件并解压,来控制视频的播放速度,使视频流以任意速度进行播放。

    By reading directly from AVI file , decompress the data and show it to the display device , we can play the stream at our expected speed .

  27. (把下载后的文件)解压到目录,这并没有要求你解压到那里。

    Unpack it to folder , there is do not have meaning where you unpack it .

  28. 为了构建SQLite,需要从SQLite下载页面下载源代码集(由所有源代码组成的单一文件)、解压它并运行./configuremakesudomakeinstall。

    To build SQLite , download the source amalgamation ( a single file combining all the source ) from the SQLite download page , extract it , and run . / configure make sudo make install .

  29. 本课题基于智能手机操作系统Symbian平台,对文件的压缩解压进行了系统的研究。

    This paper is based on smart phone operating system Symbian platform . It has a study about the compression and decompression of file systematically .

  30. 下一步是在安装子目录中打开一个文件夹,以便对根文件系统进行解压。

    The next step is to open a folder to the install subdirectory to decompress the root file system .