截面法

采用CL路径截面法生成刀具轨迹。

Generating CL tool path by using the method of curves of cross sections .

探讨了SiC晶须增强Al和碳纤维增强SiC复合材料断口的分形特征，分别用小岛法和垂直截面法测定了断口的分形维数。

The fractal characteristics of SiCW / Al and Cf / SiC composites , fracture surfaces were investigated by measuring the fractal dimensions .

6/6-SPS型Stewart机构奇异轨迹性质识别的Z截面法

Property Identification of the Singular Loci of the 6 / 6-SPS Stewart Manipulator by Using the Cross-Section of Z-plane

Poincaré截面法在局地气候预测中的应用初探

The Primary Application of Poincar é Section Method to Local Climate Prediction

本文对有效截面法和直接强度法的计算结果进行了修正，通过引入修正系数，使现有的设计方法能够用于腹板V形加劲的冷弯卷边槽钢在轴向压力作用下极限承载力的计算。

Effective width method and direct strength method are modified to make them applicable to predict the ultimate strength of cold-formed lipped-channel column with V-stiffened web under axial compression force .

结果表明，在局地气候动力系统的预测中，Poincar啨截面法具有良好的历史预报准确率和外推预报准确率。

The application results indicated that the poincar é section method can efficiently simulate and predict the evolution of local climatic dynamical system .

利用垂直截面法测量了08F钢经不同形变氮化复合后冲击断裂表面的分形维数。

Fractal dimension of impact fracture surface of08F steel was measured by vertical section method .

而现行冷弯型钢设计规范GB50018-2002采用有效截面法计算受弯构件的屈曲荷载并没有考虑卷边角度的影响，不能合理的进行斜卷边Z型檩条的屈曲荷载设计。

But the current specification GB50018-2002 does not consider the effect of lip inclination , hence , it cannot be effectively used in designing inclined lipped Z-section purlins .

运用垂直截面法和计算机图象处理等技术，对低合金高强钢焊条熔敷金属拉伸断口分形维数与其Cr、Ni合金元素含量、F相含量及平均晶粒度级别之间的关系进行了研究。

The vertical profile method and computer imaging processing have been used to study the relationship of the fractured surface fractal dimensions of the deposited metal of coated electrodes to its alloying element contents of chromium and nickel , ferrite content and average grain size .

对于含周向裂纹情况，采用两种M0的计算方法（EPRI方法和净截面法NSC）所得到的h1值相比较发现，EPRI公式得到了较好的h1函数分布。

For circumferential crack case , it has been found that the better h 1 function can be gotten by using EPRI method if two methods ( EPRI and NSC ) for determining M 0 are used .

其次，研究了在有限元分析中，先利用二维截面法得到回弹前后匹配线，再通过SGD算法得到回弹补偿型面。

Secondly , in the FEA simulation , matching section line of before and after springback will be gained by 2D section method and then compensation surface will be gained by SGD algorithm .

增大截面法是一种传统的、应用较广的加固补强方法。

Enlarging section method is a traditional and widely-applied reinforcing approach .

用截面法求解一般旋转壳体的薄膜应力

Determination of Membrane Stress in Shells of Revolution Using Cross-Sectional Method

用增大截面法对钢筋混凝土框架节点进行抗震加固

Antiseismic Strengthening of Reinforced Concrete Frame Joint by Enlargement of Section

增大截面法加固拱桥的不利影响研究

Disquisition of disadvantage influence for reinforced arch bridge with enlarged cross-section

增大截面法进行双曲拱桥加固的研究

Study on Reinforcement for Double-curvature Arch Bridge Through Augmented Section Method

弹塑性梁柱非线性分析的变截面法

A Varying Section Method for Nonlinear Analysis of Elastic-plastic Beam-column

增大截面法加固拱桥的锚杆抗拔力计算

Pull Calculation of Embedded Bars for Reinforced Arch Bridge with Enlarged Cross-Section

而传统截面法计算很复杂，步骤十分烦琐。

The traditional cross-section method is very complicated and very cumbersome steps .

用多边形截面法评价罗河矿区重力异常

Appraisal of gravity anomaly in Luohe ore area with polygonal section method

基于截面法的冲压回弹特征评价方法

Method for Determining Parameters of Springback Based on Characteristic Sections

基于特征截面法的协调叶片颤振分析

The Flutter Analysis of Tuning Blade Based on the Characteristic Section Method

加大截面法加固混凝土构件的动力性能试验研究

Research on Dynamic Performance of Reinforcement Concretes Component by Enlargement Section Method

有效截面法包括有效宽度法和有效厚度法。

The effective section method includes effective width method and effective thickness method .

设计中通常采用有效截面法。

Normally , it used effective section in designing .

考虑剪滞效应下计算钢筋混凝土箱梁应力的换算截面法

Transformation-section method for stress calculation of reinforced concrete box beams with shear lag

用加大截面法加固高层建筑框架梁柱

Strengthening Frame Beams and Columns of High-rise Buildings With the Enlarging Section Method

利用水平截面法对任意形状三度体的重力异常的快速正演

Rapid direct method of gravity anomaly of arbitrary three-dimensional body by horizontal section

弯曲内力计算的一般方法是截面法，本文给出了另外几种计算方法。

Generally , the bending internal force is calculated in the way of section .

变换截面法的扩展分析原理

The Extending Analytic Theory of Transformed Section Method