快速凝固

  • 网络Rapid solidification;rsp
快速凝固快速凝固
  1. 基于镶嵌原子势的纯Al快速凝固过程分子动力学模拟

    Molecular dynamics simulation of rapid solidification process for Al by using EAM

  2. 快速凝固高阻尼Al-Zn-Mg-Cu系合会的研究

    Rapid Solidification High Damping Al-Zn - Mg-Cu System of Alloy

  3. 快速凝固AlNiCuNd系富Al金属玻璃初始晶化行为的研究

    Investigation on Primary Crystallization Behaviour of Rapidly Solidified Aluminum-Rich Al-Ni-Cu-Nd Metallic Glass

  4. Ni(25)Al(75)合金快速凝固过程中的包晶反应与凝固进程

    Peritectic reaction and solidification path in Ni-Al alloy during rapidly solidification process

  5. 快速凝固Al-Li合金塑韧性的改进研究

    Improvement of Ductility and Toughness of Rsp Al-Li alloys

  6. Al-Fe-V-Si快速凝固热强铝合金中块状相的产生条件

    Formation conditions of massive phase in rapidly solidified Al-Fe-V-Si alloy

  7. 快速凝固对Ni基高温合金中碳化物的影响

    Effects of rapid solidification on Carbides in a Ni-based superalloy

  8. Al2O3/ZrO2快速凝固复合陶瓷显微结构与力学行为

    Microstructure and Mechanical Properties of Al_2O_3 / ZrO_2 Rapidly Solidified Composite Ceramics

  9. 快速凝固SiCp/LY12复合材料的制造工艺和性能

    Fabrication and properties of rapidly solidified sic_p / ly12 Composites

  10. 单辊旋铸快速凝固Cu(98)Cr2合金的显微组织研究

    The Study for Microstructure of Rapidly Solidified Melt Spun Cu_ ( 98 ) Cr_2 Alloys

  11. 钕铁硼快速凝固过程温度场ANSYS模拟

    Simulation of Temperature Field in the Rapid Solidification Process of Nd-Fe-B based on ANSYS

  12. 液态金属Ga的快速凝固模拟

    A simulation on rapid solidification of liquid metal Ga

  13. 激光超高温度梯度快速凝固条件下CuMn合金的组织演化规律

    Microstructure evolution of Cu Mn alloy under laser ultra high temperature gradient and rapid solidification condition

  14. 研究了固溶时效和快速凝固时效工艺对CuCrZrMg合金的显微组织、硬度和导电率性能的影响。

    The effects of different solution methods on aging properties of Cu-Cr-Zr-Mg Alloy have been studies .

  15. 镍基高温合金快速凝固粉末颗粒中MC型碳化物相的研究

    Research on MC type carbide in nickel-based superalloy powders during rapid solidification

  16. Ti对Al-Si合金快速凝固组织的影响

    Effect of Ti on rapid solidification and microstructure of melt-spun Al-Si alloy ribbon

  17. 用快速凝固Sn基活性针料低温连接ZnO陶瓷

    Joining ZnO ceramic with rapidly solidified tin-based active solders at lower temperature in air

  18. 一种快速凝固AB2型储氢合金的球磨改性

    Modification of a Rapidly Solidified AB_2 Type Hydrogen Storage Alloy by Ball-milling

  19. 在快速凝固条件下,加入合金元素Ti,液相分解组织之间的聚集现象更加严重。

    The integrations between liquid phase separation microstructures became serious when Ti element was added under rapid solidification .

  20. 快速凝固Al-Si合金干摩擦条件下的磨损特性

    Wear Characteristics of a Rapidly Solidified Al-Si Alloy under Dry Sliding

  21. 应用运动Gaussian热源模型对自淬火快速凝固过程进行计算机模拟,结果与解析法计算结果相符。

    The computer simulation was made of the rapid solidification in self-quenching with the moving Gaussian source model .

  22. 快速凝固处理导致无Co合金电化学性能的变化与合金的微结构的改变有关。

    The change of electrochemical properties of the alloy treated by rapid solidification process is related to the microstructure of the alloy .

  23. Zr对快速凝固铝锂合金微观组织和力学性能的影响

    Effect of Zr on the Microstructure and Mechanical Properties of Rapidly Solidified Aluminum-Lithium Alloys

  24. 快速凝固Al-Cu钎料钎焊铝Cu对钎缝组织的影响

    Influence of Cu on microstructure of soldered joint in Al brazing with rapid-solidifying Al-Cu solder

  25. 快速凝固Al-Si合金粉末的电镜观察

    TME Observation of Rapid Solidification of Al-Si Alloy Powders

  26. 分析了快速凝固与常规固溶处理后,Cu-0.8Cr合金导电性的差异及时效处理对合金导电性的影响。

    The differences of electrical conductivity in rapidly solidified and conventional solid solution treated Cu Cr alloy have been analysed in this article .

  27. 快速凝固Ti3Al基合金相变的X-射线衍射分析

    X-ray diffraction analyses of phase relationships in a rapidly solidified ti_3al-based alloy

  28. 快速凝固TiAl基合金稀土相显微组织的研究

    Research on Microstructure of Rare Earth Rich Phase for Rapidly-Solidified TiAl Based Alloys

  29. 性能检测表明:亚快速凝固制粉的凝固速率能细化铸态复合材料中的Al3Ni相晶粒尺寸,显著提高了铸态材料的硬度和弯曲性能。

    Mechanical tests show that the increase of solidification speed in terms of powder diameters raises the flexural properties and hardness of the cast composite .

  30. TiAl金属间化合物合金碳元素脉冲激光表面合金化显微组织及TiC快速凝固生长形态研究

    Microstructure and TiC Carbide Growth Morphology of Pulsed Laser Surface Alloyed TiAl Alloy with Carbon