堆焊

堆焊修复锻模新工艺

New Technology of Repair of Forging Die by Built-Up Welding

650轧辊的堆焊修复

Built-up welding repairing process of 650 mm roller

单钩舌CO2自动堆焊控制系统的设计

Research on Automatic Control System of Single Coupler Knuckle Pile-up Welding

激光重熔Co基合金堆焊层的组织和性能

Study on microstructure and property of Co-based alloy by laser remelting

聚焦光束堆焊铜基自熔合金过程中Fe3Si增强相的反应合成

Reaction synthesis of Fe_3Si reinforcement via light beam surfacing of Cu-based self-fluxing alloy

合金粉热喷涂式（CO2+N2）保护堆焊工艺及性能

Study on procedure and properties of co_2 + n_2 arc surfacing after thermal spraying of alloy powder

WC硬质合金颗粒堆焊烧损的机理

The Heat Damage Mechanism of WC Cemented Carbide for Hardfacing

交流TIG电弧粉末堆焊层成形特点的研究

Formation characteristics of AC TIG arc powder surfacing layer Powder Coating

时效硬化工具合金TIG堆焊金属粉芯焊丝的研制

Development of age hardening alloy metal powder-cored wire for TIG surfacing

Nb对690镍合金带极堆焊金属结晶裂纹的影响

Effect of Nb on welding solidification cracking of 690 nickel alloy surfacing metal

TiC，NbC，VC，B4C超硬质相耐磨堆焊材料的研究

The Study on Super-Harden Phace TiC , NbC , VC and B_4C Abrasive-Resistance Surfacing Materials

铜合金密封环冷体TIG堆焊工艺及接头力学性能

Cold body TIG surfacing technology and mechanical property of copper alloy gland ring

对于TIG熔敷堆焊快速成形视觉传感系统进行了一定的研究；

It researches the TIG Deposit surfacing welding rapid shaping vision sensor system .

稀土对TiC基金属陶瓷耐磨堆焊材料组织性能的影响

Effect of RE on Microstructure and Properties of Wear Resistant Materials with TiC Base Cermet

铬硼钨钒系铁基PTA堆焊合金的抗高温磨损机理研究

Study on Wear Mechanism of Cr-B-W-V Fe-Base PTA Surface Alloy at High Temperature

TIG表面重熔对堆焊层耐空泡腐蚀的影响

Effect of TIG surface remelting process on cavitation erosion resistance for a pre-weld buildup layer

大型齿轮轮齿表面堆焊&应用焊接CCT图实例

Repair surfacing for large gear-an example by using CCT diagram

TIG粉末堆焊反应合成FeAl金属间化合物层的工艺优化

Process Optimization for TIG Powder Overlaying Reaction Synthesis of FeAl Intermetallic Compounds

采用等离子堆焊工艺方法，对石油、化工行业中关键零部件堆焊Ni基、Co基材料，以达到表面改性目的。

For the purpose of surface modification , plasma surfacing is applied to Ni-based and Co-based materials that are used as key parts in petrochemical industry .

Co元素对时效硬化工具合金TIG堆焊金属粉芯焊丝堆焊层硬度及红硬性的影响

Effect of cobalt on hardness and red hardness of surfacing layer of metal cored wire for TIG surfacing of age hardening alloy

高锰铸钢MAG堆焊试验研究

Study of MAG surfacing of high manganese cast steel

用WO3+C纳米混合粉末制备堆焊用新型耐磨合金粉块

Preparation of New Wearable Alloy Powder Block from Nano-structured WO_3 + C Composite Powder

Fe-Al合金堆焊层的组织和性能研究

Study on Microstructure and Property of Fe-Al Alloy Clad Metal

等离子弧堆焊TiB2-金属陶瓷涂层的组织及性能

Microstructure and properties of TiB_2-metal ceramics coatings by plasma transferred arc surfacing

手弧堆焊Fe3Al堆焊层的组织形貌与抗氧化性能

Microstructures and Oxidation Resistance of Fe_3 Al Overlay by Manual Arc Surfacing

Al-Cu复合焊丝用于铝合金的堆焊

Surfacing on aluminum alloys with Al-Cu composite wire

研究了C、Cr、W、Mo、V和Nb等合金元素和显微组织对堆焊瓦楞辊力学性能的影响。

The influence of alloying elements C , Cr , W , Mo , V , Nb and microstructure on mechanical properties of welding corrugated roller were analyzed .

另一种是电渣带极堆焊工艺（ESC）。

Are strip cladding ( SAC ) and electric slag strip cladding ( ESC ) .

Fe3Al合金的堆焊性能研究

Research on the overlaying property of Fe_3Al alloy

Nd：YAG激光+脉冲MAG电弧复合热源规范参数对平板堆焊焊缝表面成形的影响

Influences of Welding Parameters on Weld Appearance in Nd : YAG Laser + Pulsed MAG Hybrid Cladding