原位复合材料

该原位复合材料在pH为7.0的人工海水中耐蚀性，比在pH为8.2的人工海水中好。

The in-situ composite exhibits high corrosion resistance in the seawater with ( 7.0 pH ) value than that in the seawater with 8.2 pH value .

Cu-纳米TiB2原位复合材料的电滑动磨损性能

Electrical Sliding Wear Behavior of TiB_2 Nanoparticles Reinforced Copper Matrix In-situ Composite

Al3Ti/ZL101原位复合材料的铸造性能研究

Study on Casting Properties of Al_3Ti / ZL101 in Situ Composite

形变Cu基原位复合材料热稳定性研究

Investigation of the Thermal Stability of Cu - Based in situ Composites

用超临界CO2制备微孔聚苯乙烯/热致液晶聚合物原位复合材料

Preparation and characterization of microcellular polystyrene / lcp in situ composites by using supercritical co_2

热处理对AlN·Al3Ti/ZL101原位复合材料力学性能的影响

Effect of Heat Treatment on Performance of AlN · Al_3Ti / ZL101 in-situ Composite

Mo对于Nb/Nb5Si3原位复合材料室温韧性的影响

Effect of Mo Addition on the Fracture Toughness of Nb / Nb_5Si_3 in situ Composites

改性石油树脂对PVC的增韧BMI原位复合材料的研究

Study on Modifying PVC with MPR On Modifying BMI With In Situ Composite Technology

MCPA6/纳米TiO2原位复合材料的熔融行为

Melting Behaviors of MC Nylon 6 / Nano-meter TiO_2 In-situ Composite

Cr元素对Cu-Fe原位复合材料的电化学腐蚀行为的影响

Effects of Cr Element on Electrolytic Corrosion Behavior of Cu-Fe in Situ Composites

Cu和Fe大变形下的性能及Cu-Fe原位复合材料的强度计算

Properties of Cu and Fe under large deformation and strength calculation of Cu-11.5 % Fe in situ composites

增强相Al3Ti状态对Al3Ti/ZL101原位复合材料力学性能的影响

Influence of the Condition of Reinforcing Phase Al_3Ti on Mechanical Properties of Al_3Ti / ZL101 Composite

通过阴离子开环聚合法制备了纳米二氧化硅（SiO2）/MC尼龙6原位复合材料。

Silica / MC nylon 6 in-situ nano-scale composites were prepared by means of anionic ring-opening polymerization .

拉伸实验表明，碳纤维/MC尼龙6原位复合材料的拉伸强度与MC尼龙6相近。

Tensile strength test results indicate CF / MC nylon 6 and MC nylon 6 have similar tensile strength .

通过合金成分和变形工艺研究，制备了一种高强度高导电性的形变CuFe原位复合材料。

In order to develop the high strength and high electrical conductivity deformation-processed Cu-Fe in situ composites , the alloy composition and deformation route were studied .

Cu-20vol%（Fe-Cr）原位复合材料中Cr元素的作用

Effect of Cr on the Microstructure and Mechanical Properties of Cu-20vol % ( Fe-Cr ) in situ Composites

UHMWPE物理改性方法主要有共混改性、流动改性剂改性及液晶高分子原位复合材料改性。

Physical modification methods of UHMWPE mainly included blending , rheological modifier and liquid crystal insitu composite modification .

NiAl合金基原位复合材料的反应热压法制备和拉伸性能

Tensile properties of NiAl alloy matrix in situ composites fabricated by reactive hot pressing techniques

高强度高导电的形变Cu-Fe原位复合材料

High strength and high electrical conductivity deformation-processed Cu-Fe in situ composites

Cu-Fe原位复合材料在模拟污染环境中的大气腐蚀研究

Atmospheric corrosion of Cu-Fe in situ composites in simulated polluted environments

Cu-Fe原位复合材料的研究现状和发展趋势

Research Situation and Developmental Tendency of Cu-Fe In-situ Composites

试验结果表明，铝熔体与SiO2颗粒能发生放热反应，从而制备出Al／Al2O3颗粒原位复合材料。

Experiments show that , an exothermic reaction between aluminum melt and granular SiO2 takes place , thus , Al / Al2O3 granular composite material in situ is prepared .

（TiB2+Al3Ti）/ZL101原位复合材料的强化机理

Reinforcing Mechanism of In-situ Composite ( TiB_2 + Al_3Ti ) / ZL101

钠盐一步法合成聚醚砜树脂（PES）的中试研究聚醚砜/热致液晶高分子原位复合材料的结构与性能

Studies on the Pilot One-step Synthesis of PES by Sodium Salt STRUCTURE AND PROPERTIES OF IN SITU COMPOSITE OF PES / TLCP

合金元素对形变Cu-Fe原位复合材料性能的影响

Effect of Alloy in g Elements on Properties of Deformation - processed Cu - Fe in Situ Composites

形变Cu-Cr原位复合材料中纤维相的热稳定性GB/T10295-1988绝热材料稳态热阻及有关特性的测定热流计法

Thermal stability of Cr filaments in Cu-Cr in-situ composites Thermal insulation Determination of steady-state thermal resistance and related properties Heat flow meter apparatus

用热致液晶聚合物（TLCP）与热塑性塑料（TP）共混制备原位复合材料是增强高分子的重要途径。

Preparing in situ composite by blending thermoplastic polymer ( TP ) with thermotropic liquid crystalline polymer ( TLCP ) is one of important approach to reinforce polymer .

采用拉拔变形法制备了Cu-Fe-Cr原位复合材料，并从线材中提取出Fe-Cr纤维。

Cu-Fe-Cr in-situ composite wires were manufactured by cold drawing and Fe-Cr fibers were extracted from them .

Mo-Si-B系原位复合材料的研究

Development of Mo-Si-B in-situ Composites

激光熔炼W/W2Ni3Si金属硅化物原位复合材料的耐磨性

Wear properties of laser melted w / w_2ni_3si metal silicides matrix in situ composites