剑杆织机

利用ANSYS软件建立了剑杆织机机架的有限元模型。

The FEM model of rapier loom frame is established with ANSYS software .

刚性剑杆织机CMOS电路控制装置

A New Electronic Control Device on Hard Rapier Loom with CMOS Circuits

万事达（FAST）剑杆织机的运动分析及生产实践

Motion Analysis and Production Practice of Rapier Loom FAST

三维多剑杆织机的CAD／CAM系统。

CAD / CAM system of the 3-D Multi-rapier Loom .

剑杆织机生产Modal贡缎的实践

Practice of Producing Modal Satin Drill in Rapier Loom

GAMMA剑杆织机生产牛津纺织造工艺探讨

Study the Technology of Weaving Oxford Cloth on GAMMA Rapier Loom

GAMMA剑杆织机工艺的配置与生产实践

Technology setting and production practice on Model GAMMA rapier loom

GAMMA型剑杆织机双纬织造的分析

Analyses of Double Weft Weaving of GAMMA Rapier Loom

GAMMA型剑杆织机进行双纬织造时，机构设置有其特殊性。

During double weft weaving of GAMMA rapier loom , the mechanism has its speciality .

本文介绍一种刚性剑杆织机CMOS电路控制装置的原理。

The principle of a new electronic control device with CMOS circuits on hard rapier loom is introduced .

主要介绍利用三菱PLC对高速剑杆织机控制时角度信号的采集以及断经断纬时定位停车的处理。

This paper introduces how to collect the angle signal by using Sitsubish PLC for stop location control of high-speed rapier loom when warp or weft broke .

MAV剑杆织机的测试和简略分析

An Analysis of Weft-Inserting System of MAV Rapier Loom

使用于比利时比佳乐GTM剑杆织机。

Applicable for PICANOL GTM type rapier loom made in Belgium .

介绍了GAMMA型剑杆织机的上机工艺参数及其配置，并给出了提花织物和色织斜纹织物的生产实例。

In this article are introduced the processing parameters and its technology setting demanded by model GAMMA rapier loom with production practice on GAMMA is also given .

文章对GAMMA剑杆织机生产牛津纺的织造工艺进行了探讨，同时通过对比实验选择了最佳工艺参数。

The technologies of weaving Oxford Cloth on GAMMA rapier loom are discussed , and the optimum processing parameters are selected by the comparison experiments throughout monitor processing .

设计并在一般剑杆织机上试织7种不同结构的组合式3D预制件，采用真空辅助成型工艺分别制作这7种复合材料，同时测试各种试样的拉伸性能。

Seven kinds of combined 3D woven fabrics were designed . All of these 3D fabrics were woven in a rapier weaving machine . The composite was manufactured with new molding technology , VARI ( Vacuum Assisted Resin Infusion ) .

本课题通过对三维多剑杆织机的研制和CAD／CAM系统的设计，使三维机织物的织造实现了自动化生产和集中管理，在纺织结构复合材料的生产上迈进了一步。

In virtue of the development of 3-D Multi-rapier Loom and the design of CAD / CAM system , the weaving of 3-D fabric gains automatic production and concentrative management . The research work promoted the manufacture of textile structural composite .

以Solidedge3维造型软件为设计环境，以VB为工具开发了剑杆织机变型设计系统，阐述了剑杆织机建模、参数传递和产品变型设计的关键技术及其实现方法。

Finally , taking Solid Edge as a 3D environment and VB as a development tool , a variant design system was developed for the variant design of complicated rapier loom , the loom modeling techniques and variant parameters transferring were expatiated .

经二重靛蓝牛仔布在GTM-190型剑杆织机上的织造

Design and development of warp backed weave denim on GTM-190 rapier loom

在GAMMA型剑杆织机上采用单织轴织制平纹地小提花织物时，通过制定合理的上机工艺参数，有效解决了停经片下沉及经纱断头问题，使织造效率由30%提高到80%。

When weaving plainback mini-jacquard fabric on GAMMA rapier loom with single beam , properly setting looming parameters and programming can effectively the problems of drop-wire sinking and warp break and increase weaving efficiency from 30 % to 80 % .

JP-623型挠性剑杆织机性能介绍

Introduction to Performance of JP-623 Jacquard Weaving Machine with Flexible Rapiers

CRT-83型地毯剑杆织机的性能与产品开发研究

Research on the Function and Product Development of CRT-83 Carpet Rapier Loom

从理论上分析了GA749型剑杆织机开车横档形成的原因。

The paper analysed the causes for the formation of starting marks in GA749 rapier looms .

研究嵌入式RTOS和剑杆织机计算机控制系统。不仅有助于嵌入式技术的应用和发展，而且对缩短中外技术差距、提高我国织机自动化水平和国民经济有着重要意义。

The research of RTOS and the rapier loom control system , not only is helpful to the application and development of embedded technology , but also has vital signification to raise the national automation level and the national economy .

GA747型剑杆织机结构简单，使用广泛，但是采用单片机控制存在着诸多缺点。

GA747 Rapier Loom has the advantages in its simple structure and extensive application , while the disadvantage lies in its microcontroller .

分析了G1731型剑杆织机引纬机构的原理及运动规律，探讨了剑杆织机引纬机构的调整方法。

This article analyses the movement principle and regulation of the weft insertion of rapier loom model G1731 , and discusses its adjustment .

介绍了G1613型剑杆织机引纬系统的组成，对引纬系统的引纬和打纬等机构的运动规律进行了分析与讨论。

This paper introduces the construction of weft insertion motion of rapier loom G1613 , and analyses the movement regulation of weft insertion and battening .

本文对我院研制的CGD-721型刚性剑杆织机引纬凸轮的磨损和寿命进行研究。

This paper dealt with the service life and wearing of the rapier-driving conjugate cams of themodel CGD-721 rigid rapier loom designed by our college .

利用Pro-E软件对剑杆织机的主要部分进行建模。如机架系统模型、空间四连杆引纬、共轭凸轮打纬机构实体模型、送经卷取机架结构与开口机构实体模型等。

The main parts of rapier loom is modeled by Pro / E , such as loom frame model , spatial four-link weft , conjugate cam beating model , let-off and take-up system , and shedding mechanism model .

介绍了GA738型剑杆织机卷取机构的设计情况，从其传动原理、纬密表的制作、变位齿轮的计算等方面作了分析说明。

This article introduces the design of the take-up mechanism of GA738 rapier loom with driving principle analyzed , picks insertion table made , and profile correction of driving gear calculated .