乳液聚合

考察了聚合工艺条件对乳液聚合稳定性的影响。

This paper presents investigation of effect of polymerization process condition on stability of emulsion polymerization .

阳离子型共聚单体DMC在MMA/BA/DMC无皂乳液聚合中的影响

Effect of Cationic Comonomer DMC on MMA / BA / DMC Soap-free Emulsion Polymerization

超声引发乳液聚合制备聚丙烯酸丁酯包覆炭黑OH自由基捕捉剂加速超声引发乳液聚合的研究

Preparation of Poly ( n-Butyl acrylates ) Encapsulated Carbon Black via Ultrasonic Irradiation Initiating Emulsion Polymerization

乳液聚合法制备纳米Al2O3/PS核壳式复合粒子

Preparation of NANO-Al_2O_3 / PS composite nanoparticles with core-shell structure through emulsion polymerization

UV光引发的丙烯酰胺反相乳液聚合

Inverse emulsion polymerization of acrylamide initiated by UV radiation

采用乳液聚合的方法合成了PVC透明树脂用的增韧剂，其改性效果十分良好。

The PVC resin modifiers are synthesized by emulsion polymerization , which have a high toughened efficiency .

SAN乳液聚合动力学

Kinetics of SAN Emulsion Polymerization

用种子乳液聚合法合成的ASA复合胶乳粒子的形态

Morphology of ASA Composite Latex Particles Synthesized by Seeded Emulsion Polymerization

纳米SiO2存在下苯乙烯原位乳液聚合

In-situ emulsion polymerization of styrene in the presence of nano-SiO_2

细乳液聚合制备聚丙烯腈/纳米SiO2复合粒子

Preparation of Polyacrylonitrile / Nano-SiO_2 Composite Particles by Miniemulsion Polymerization

红外分析表明：在乳液聚合的过程中，PU与PA之间仅仅发生物理复合，而没有发生化学的交联。

The analyse of IR indicated that no chemical cross-linkage but physical composition occurred between PU and PA.

OH自由基捕捉剂加速超声引发乳液聚合的研究六氯苯与OH自由基的反应

Enhancement of ultrasonically initiated emulsion polymerization rate of styrene using aliphatic alcohols as hydroxyl radical scavengers Studies on the Reaction of OH Radical with Hexachlorobenzene

超声辐照引发原位乳液聚合制备P（BA-MMA-AA）/TiO2纳米复合材料

P ( BA-MMA-AA ) / TiO_2 Nanocomposites Prepared by Ultrasonic Initiated In-situ Emulsion Polymerization

TEM照片显示出，采用种子微乳液聚合法合成的硅丙微胶乳粒子由于内部存在交联结构而导致表面形状不规则，有乳突现象；

Photos of TEM show that the modified microlatex particles synthesized by seed microemulsion polymerization have irregular surface shape like papilla .

采用乳液聚合法制备了聚苯乙烯（PS）微球，对制备条件进行了研究。

In this paper , polystyrene microspheres were synthesized by emulsion polymerization method . The preparation conditions of PS microspheres were discussed .

P（AM-DM）的反相乳液聚合研究

Study on the polymerization of P ( DMDAAC-AM ) using reversed phase method

在此基础上，提出了合适的乳液聚合配方和乳液制备条件，制得了适合于共混纺丝用的PVC乳液。

Based on these results , the optimal preparation conditions of the PVCemulsion which is suitable for spinning PVA / PVC blend fibre are obtained .

采用适时补皂、种子乳液聚合方法合成粒径大、分布窄的SBR胶乳。

The SBR latex with large particle diameter and narrow distribution were synthesized by reinforcing additional emulsifier and seeding emulsion co-polymerization .

以PAM，CMC和EC代替PVA作醋酸乙烯酯乳液聚合保护胶体的研究

Study on the emulsion polymerization of vinyl acetate with PAM , CMC and EC in place of PVA as protective colloid

本文采用SiO2纳米粒子作为种子进行了甲基丙烯酸甲酯的乳液聚合。初步探讨了此类种子乳液聚合的过程；

In this experiment , seed emulsion polymerization of methyl methacrylate was carried out by using SiO 2 nanoparticles as seeds .

在硝胺填料HMX表面的乳液聚合-包覆

Emulsion Polymerization and Coating on Nitramine HMX Filler Surfaces

利用无皂乳液聚合的方法合成了表面含有羧基的亚微米级聚（苯乙烯-共-丙烯酸）（P（St-co-AA））微球。

Surface-carboxylic poly ( styrene-co-acrylic )( P ( St-co-AA )) sub-micron spheres were prepared by soap-free emulsion polymerization .

采用种子乳液聚合技术，以K2S2O8为引发剂合成了一系列PBgSAN接枝共聚物。

A series of PB g SAN copolymers were synthesized by seed emulsion polymerization using K 2S 2O 8 as the initiator .

同时，以水为反应介质，利用常规乳液聚合方法制备聚苯乙烯纳米粒子，对乳液样品进行了TEM分析与FTIR分析；

Meanwhile , polystyrene nanoparticles were prepared by emulsion polymerization in water media and the production were analyzed by the means of TEM and FTIR .

反应性乳化剂性质的不同，对MMA／BA无皂乳液聚合及乳液性能存在较大的影响。

There were many effects on MMA / BA emulsifier-free emulsion polymerization and its properties because of the difference of reactive surfactants .

高固含量稳定无皂乳液聚合的研究&MMA/BA/MAA（AA）无皂乳液聚合体系

A study on high solid content and stable emulsifier-free emulsion polymerization & mma / ba / maa ( aa ) emulsifier-free emulsion polymerization system

本人通过总结前人的研究成果，并加以创新，使用乳液聚合法在非自然条件下&电场条件下制备了针状纳米PS聚合物。

On to summarize the results of previous research and innovation , the needle-like nano-PS was prepared by emulsion polymerization method under unnatural conditions-electric field conditions .

采用种子乳液聚合手段，合成了具有核壳结构的抗冲击改性剂ACR。

A kind of impact modifier ACR with core - shell structure was synthesized by emulsion polymerization .

利用蒙脱土能够均匀分散在水中的特点，用乳液聚合的方法制备聚甲基丙烯酸甲酯（PMMA）/蒙脱土嵌入混杂材料。

Montmorillonite is easily dispersed in water uniformly , therefore PMMA / Montmorillonite intercalated hybrid can be prepared by a simple emulsion polymerization .

以改性氧化锌微粒为种子进行无皂乳液聚合，引发剂引发St单体生成低聚分子链吸附缠绕在氧化锌微粒表面，最终形成ZnO/PSt包覆复合微粒。

With modified ZnO particles as seeds , soapless emulsion polymerization was carried out . The PSt oligomers were absorbed and trapped on the surface of ZnO particles .