硅橡胶

在Hunter两期重建屈肌腱和硅橡胶套管人工腱的实验基础上，对9例进行了一次型套管腱修复，疗效满意。

On the basis of the experiments of Hunter 's two stage reconstruction and the artificial tendon with silastic tube , 9 cases were repaired by one stage ensheathed tendon with satisfactory results .

耐热硅橡胶密封圈，不易老化，密封性能好。

Heatproof silastic sealed ring , non-aging and good sealing property .

软质的硅橡胶在接触皮肤时不会有不适感，而框架的这种“带状”设计也只对面颊产生轻微的压力作用。

Its soft silicone rubber curves have been designed to feel comfortable on your skin while the ' wire ' design promises to place only gentle pressure on your cheeks .

Al（OH）3准纳米材料在硅橡胶配方中的应用

Application of quasi-micromillimeter material Al ( OH ) _3 in silicon rubber

试验发现，加成型室温硫化硅橡胶硫化过程产生气泡的主要原因是氢基硅油与H2O分子的反应。

Result showed that air bubble when the rubber curing came from the reaction of Si-H and H_2O .

单组分RTV硅橡胶与PMMA粘结性能的研究

Study on Bonding Strength between One-pack RTV Silicone Rubber and PMMA

纳米SiO2粒子链对硅橡胶的补强机理

Reinforcing Mechanism of Silicone Rubber

硅橡胶（Q）为主链含有硅、氧原子的特种橡胶，其中起主要作用的是硅元素。

Silicone rubber ( Q ) - based chain containing silicon and oxygen atoms of special rubber , which play a major role in the silicon .

利用硅橡胶气囊辅助RTM工艺，可以制作纤维体积含量较高的复合材料构件。

The fiber volume of composite parts made by silicon rubber inflatable bag is high .

硅橡胶（PDMS）是通用高分子中最早应用于氧氮分离技术的材料。

Silicone rubber ( PDMS ) is used as a membrane material for gas separation .

基于LOM技术的硅橡胶模具技术研究

Study on the Technology for Silicone Rubber Moulds Based on LOM Technology

采用Z桨捏合机，将端乙烯基硅橡胶、气相法白炭黑及羟基硅氧烷进行混炼，制备了高强度硅橡胶混炼胶。

High strength silicone rubber compounds were prepared using vinyl-terminated silicone rubber , fumed silica and hydroxy siloxane by intensive mixing method in Z blade mixer .

烧蚀后的硅橡胶表面为蜂窝状结构，侧面有熔融SiO2流挂现象。

The surface of ablated silicone rubber was cell structure , and there was melt out sag SiO 2 on its side .

硅橡胶-SiO2-Al2O3杂化材料研究

Investigation of Silicone Rubber-SiO_2-Al_2O_3 Hybrid Materials

适当粒度的Al（OH）3在偶联剂存在下，对硅橡胶复合材料具有更好的阻燃作用，而且对材料介电性能影响小。

( OH ) _3 with proper size , could be used as excellent flame retardant agent for silicone rubber , which had little influence on the dielectric performance of the pouring materials .

POSS对硅橡胶的增强效应、增塑效应取决于其分散结构。

The reinforcement of plasticizing effect or POSS was dependent on its dispersion structure .

结果ePTFE组的愈合情况优于加成型硅橡胶组。

Result The healing state of Group ePTFE was better than Group silicone .

方法按照Poland综合征不同个体胸壁畸形的形态定制柔软固体硅橡胶假体，柔软度接近人的胸大肌。

Methods The customized , textured silicone prosthesis was fabricated from a soft silicone polymer that approximated to the softness of the pectoralis major muscle .

SY-1型仿真颌面赝复硅橡胶临床操作性能的实验研究

Studies on the operational characteristics of a new maxillofacial silicone elastomer SY-1

目的：探讨赝复配色颜料及口腔唾液对MDX44210硅橡胶表面白色念珠菌（Candidaalbicans）粘附性的影响。

Objective : To investigate the influence of pigment and saliva on the ability of Candida albicans to adhere to silicone elastomer used as prosthetic materials .

用碳纳米管（CNT）填充硅橡胶制备了碳纳米管/硅橡胶复合材料，并研究了复合材料的电学特性。

Carbon nanotubes ( CNT ) / silicone rubber composite was prepared by modifying carbon nanotubes , and it 's electrical properties were investigated .

本文研究了国产18-甲基炔诺酮硅橡胶长效皮下埋植剂的药物体外释放，并与进口Norplant进行了比较。

Drug release from Chinese subcutaneous implants containing levonorgestrel was studied . It was compared with that of Norplant .

结果发现，电晕后HTV硅橡胶材料表面出现孔洞、裂痕等缺陷，电晕时间越长破坏越为明显。

The results show that after corona there are some holes and cracks in the HTV silicone rubber surface .

分类分析了从RP原型到硅橡胶模具及树脂制品浇注整个工艺过程的尺寸误差，并给出了相应的改进措施。

The dimensional errors of the integral process from RP prototype to the silicon rubber mould and casting resin products are classified and analyzed , and the corresponding improvement measures are given .

制备了一种有机硅胶粘剂，该胶粘剂主要由苯基硅橡胶与MQ硅树脂组成，对影响该胶粘剂胶接强度的因素进行了研究。

A kind of high - temperature - vulcanization silicone adhesive mainly consisted of phenyl silicone rubber and MQ resin was prepared , and factors having effects on its adhesive strength were investigated .

用开炼机混炼法，研究了有机短纤维（聚芳砜纤维、聚酯纤维）和无机短纤维（碳纤维、玻璃纤维）对硅橡胶的补强作用，并用SEM观察了微观形态。

The reinforcement of short organic fibers ( polyaryl sulfone fiber , polyester fiber ) and inorganic fibers ( carbon fiber , glass fiber ) on silicone rubber was studied by mixing mill and the morphology was observed by SEM .

仅有有限证据表明LIRI与Swanson硅橡胶假体植入术的效果相似。

Only limited evidence showed that effectiveness was similar between LRTI and Swanson implant .

室温硫化硅橡胶涂料（RTV涂料）可以有效防止污闪事故，已在我国电力系统中广泛应用。

Room Temperature Vulcanized ( RTV ) silicone rubber coating can prevent pollution flashover accident from happening , and it has been widely used in China .

自行研制了氰乙基（25%，质量分数）甲基硅橡胶（XE-60）石英毛细管色谱柱。

The quartz capillary column is prepared with cyanogen ethyl methyl silastic .

目的：评价GP-084泡沫硅橡胶和SY-1硅橡胶之间的粘结性能。

Objective : To study the adhesive properties between GP-084 cellular silicone elastomer and SY-1 silicone elastomer .