高速线材

国产高速线材轧机精轧机组的技术改进

Technology reformation of finishing stands of domestic high-speed wire rod mill

高速线材净环水系统改造

Modification of purified recirculating water system of high-speed wire rod

利用Cp值评价高速线材生产过程的稳定性

Evaluation of Production Process Stability of High Speed Wire Rod by C_p Value

C×D高速线材的开发与生产

Development and Production of C × D High-speed Wire

PLC在高速线材生产线飞剪控制中的应用

PLC Applied to Control the Shear in High-speed rod mill production line

STD工控机在高速线材轧线上应用

The application of STD industrical computer in Hi & Speed stell wire rolling

公司拥有一些世界领先的生产线，包括薄板、高速线材、列车车轮和H型钢等生产线。

The company has some of the world 's leading production lines of thin strips , high-speed wires , train wheels and steel H-beams .

中板、高速线材、棒材、车轮轮箍和H型钢等于1997年相继取得ISO&9002质量体系认证证书。

Among them , medium plate , high speed wire rod , rebar , train wheel & tyre aznd H-beam , passed the assessment of ISO9002 in1997 .

介绍了西门子公司的IGBT中压变频装置（MV）在安钢高速线材机组中的应用情况。

The application of Siemens IGBT Medium-voltage Converter system in Anyang Wire & Rod Plant is introduced .

结果表明，高速线材形成的黄色锈斑以多孔疏松的Fe2O3、FeOH结构为主。

Results showed that the rusty was composed of Fe_ 2O_ 3 and Fe - OH with porous and loose structure .

在设备管理子系统中根据RCM理论，对唐山钢铁公司高速线材的所有电气设备进行全面而细致的RCM分析，建立起设备的设备卡片表和信息工作单；

Equipment Management System establish device card table and device information sheet for every device ;

ABB控制系统在高速线材生产线的应用

Application of ABB Control System in High-speed Wire Production Line

高速线材轧机齿轮箱典型故障的CTN综合诊断

The Comprehensive Diagnosis of Gear-box Typical Fault in the High Speed Wire Rolling Mill

高速线材82B控制冷却线的数学模型和应用

Mathematical Modeling and Application of Controlled Cooling Line of High-Speed Rolling Rod 82B

ORBIS测径系统在高速线材轧机上的应用

Application of ORBIS Diameter measurement System in the High Speed Wire Rod Rolling Mill

概述活套控制系统在高速线材轧制中的作用、控制原理、PLC逻辑控制及活套调节对精轧机和夹送辊、吐丝机之间张力的影响。

A general introduction was made on effect , control principle and PLC logic control of the loop control system in high speed rod rolling . Influence of the loop regulation on tension among finisher , pinch roll and wire laying head was presented .

本文分别采用CO2激光和YAG激光对熔覆高速线材轧辊所用钴基合金开裂进行了研究，主要研究成果如下：激光熔覆工艺参数对钴基合金熔覆层的裂纹敏感性有着重要影响。

In this paper , cracking in CO2 and YAG laser cladding of cobalt-based alloy for high-speed wire roller is studied . The main results are as followings . Processing parameters have significant effect on the cracking susceptibility of Co-base alloy .

介绍采用转炉、LF炉精炼、小方坯连铸机、高速线材轧机生产工艺试制ML08Al冷镦钢的过程。

To introduce the trial production process of ML08Al cold heading steel adopting the process of converter steel-making , LF refining , billet continuous cast and high speed wire rod mill .

高速线材04H轧机减速齿轮断裂分析

Fracture analysis of the reducing gear in the 04H high-speed wire mill

82A钢高速线材控制冷却工艺的优化

Optimization for Control-Cooling Process of High Speed Rolled Wire of Steel 82A

介绍了天钢利用顶底复吹转炉、LF精炼炉、方坯连铸、高速线材轧机工艺生产TS06拉丝专用钢盘条的实践。

The practice of the process of top-bottom blowing converter-LF refining furnace-billet casting-high speed wire rod mill for producing special TS06 wire-drawing steel wire rod is briefly introduced .

本文利用产业组织理论对国内钢铁产业规模及产业集中度进行了分析，结合高速线材产品进行了实证研究，提出了优化产品结构、提高行业集中度、RD等对策。

Based on theory of industrial organization , this paper analyses the scale , centrality of China 's ferrous metal industry , with wire rod products as subject of experimental study . Proposals are offered concerning optimization of product structure , improvement of industrial centrality , RD etc.

介绍了高速线材轧机φ410mm离心铸造复合球墨铸铁轧辊的试制过程。

This paper describes the trial production process of 410 mm centrifugally double poured nodular cast iron rolls used in high speed wire rolling mills .

以高速线材82B为例，采用有限元方法模拟了其轧后控冷过程中的相转变过程，说明相转变过程计算机模拟研究工作对现场生产的指导意义。

High speed wire 82B is taken for example to simulate its phase transition course during control cooling after rolling by finite element method . It is explained that computer simulation has conduct significance in site production .

简要介绍了广钢中轧车间Φ650mm开坯生产线改建成高速线材生产线的工艺、新增设备性能参数及设计特点。

The technology process , new equipment performance parameters and design characteristics of the high-speed wire production line which is reformed from Φ 650mm medium section rolling line are briefly introduced .

青钢应用“转炉-小方坯连铸机-高速线材轧机”工艺流程试制EH14焊接用钢盘条。

The advanced development process flow of " converter-small billet continuous casting machine-high speed wire rod mill " is adopted in developing EH14 wire rod for weld .

唐钢高速线材厂轧钢生产线风冷运输辊道电动机采用变频调速控制，随着轧制速度的加快，0～50Hz可调频率范围的转速，不能满足生产的要求，因此对电动机进行了扩大调速范围的技术改造。

The air-cooled roll motor , installed in the high-speed wire factory of Tangshan Iron and Steel Company , uses transducer to control the speed , which with the range of 0-50 Hz can not fit the demand of production .

在此基础上，设计了用以浇铸70～85mm小方坯的水平轮式连铸机，其预期的最高出坯速度为28m/min，并能与高速线材轧机相配合，直接轧制成材。

Based on the result of pilot experiment , a wheel caster for billet of 70-85 mm square in cross-section is designed , the expected casting speed will be 28m / min , and it can match with high-speed rod mill for direct rolling .

高速线材轧机在线监测及故障分析

Online Monitoring and Fault Analysis of High Speed Wire Rod Mill

粘接技术在高速线材生产设备中的应用

Application of bonding techniques in equipments of high-speed wire stock production