连铸机

120T连铸机控制系统高效国产化改造及应用

Homebred Alteration and Application of Automatic Control System of 120T CCM

大方坯连铸机活动段支撑架工作可靠性的研究

Reliability analysis of sustainment frame in active segment of bloom CCM

PLC及动态画面监控系统在小方坯连铸机上的应用

The Application of PLC and Moving picture Monitoring System to Bar Billet Caster

连铸机拉矫辊压力的PID控制

Pressure Control of Straightener Roller in Beam Blank Caster

基于粒子群算法的连铸机拉矫辊压力的PID参数整定

Pressure Control PID Parameters Tuning of Straightener Roller in BOF based on PSO

PLC在水平连铸机多辊驱动系统同步控制的应用

Application of PLC in Synchronizing Control of Multi-roller Drive on Horizontal Continuous Casting Machine

PLC在连铸机三合一出坯系统控制中的应用

Application of PLC to the Control System in the Three-in-one Ejection System of Billet Conticaster

对梅钢2号连铸机采用的FC-Mold（FlowControlMold）全幅2段电磁制动器使用效果进行了研究。

The using effect of Flow Control Mold Electromagnetic Brake ( EMBR ) at 2 # continuous caster in Meishan Steel was studied .

PLC控制下轻压下系统在小方坯连铸机上的应用

The Application of the Soft Reduction Controlled by PLC on the Continuously Casting Small Square Machine

CSP连铸机液压润滑系统的管理与维护

Management and Maintenance for Hydraulic and Lubrication System of CSP Caster

SATURN软启动器在连铸机大包回转台电机控制中的应用

Application of SATURN Soft-starter in Motor Control of Continuous Caster Turret

CSP连铸机大型液压缸的故障分析与改进

Fault analysis and renovation of the hydraulics cylinder for the CSP continuous casting machine

重点介绍二级控制系统硬件和软件配置、特点、实现的主要功能，以及在此基础上开发出异型坯连铸机二级系统与热轧H型钢厂二级计算机系统之间点对点通信等应用软件。

The application software for peer to peer communication between the continuous caster level 2 system and the level 2 system of Universal Section Rolling Mill is developed .

MPI网及全局数据在连铸机电控系统技改中的应用

Application of MPI Net and Overall Date-Base in Technical Transformation of Electrical Appliance Control System of Caster

涟钢CSP连铸机提高连浇炉数的途径与措施

Ways and Means to Increase Continuous Casting Heats of CSP Caster in Hunan Valin Lianyuan Iron and Steel Company

结合W厂3号连铸机生产实践，研究了影响连铸坯免清理率的主要因素。

Based on the production practice of 3rd caster of a steel factory , the factors which affect the rate of cleaning-free of C-C slab were studied .

连铸机结晶器铜板电镀镍-钴（Ni-Co）合金工艺

Technology of Electroplate Ni-Co Alloy for Sheet Copper of Continuous Caster Crystallizer

利用自行设计制造的半固态连铸机对FeCrC系及FeMnC系合金进行了半固态连铸试验。

A series of continuous casting tests for Fe Cr C white cast iron and Fe Mn C high manganese steel were carried out with a self made semisolid metal continuous casting machine .

VAI大板坯连铸机水平段频繁损坏分析及改造措施

The analysis and Countermeasures of frequent damage of VAI slab caster horizontal segments

用AUTOCAD作图检查弧形连铸机四连杆机构结晶器振动台的轨迹精度

By using AutoCAD draw method to check the locus accuracy of the crystallizer vibro-bench that fixed in the four articulated connecting rod assembly of the arc continues casting machine

引进150t超高功率电炉和管坯连铸机的循环水系统

Circulation Water System of 150t Superhigh Power Electric Furnace and Pipe Blank Continuously Cast Machine Introduced

阐述包钢方坯连铸机VD炉真空系统的工作原理，对VD炉真空系统的常见故障提出了解决办法。

In this paper , the principle of the vacuum system of VD is analyzed and the methods to eliminate the faults of VD are put forward .

介绍了宣钢炼钢厂通过对LF钢包精炼炉，连铸机中间包流场、结晶器、二冷配水等重要工序进行技术改造和工艺优化，提高了铸坯质量，为开发生产品种钢提供了保证。

Through the technical innovation and optimization of ladle refining furnace , continuous caster tundish , mould and secondary cooling zone , the steelmaking plant of Xuanhua Steel has improved its quality of continuous casting blank .

通过研究发现：主要元素C从LF炉到连铸机中包呈升高趋势，铸坯样和精炼炉终点样基本一致。其他元素从冶炼终了至连铸完成基本不变。

We found that main element C presents increasing trend from LF furnace to tundish of caster , casting billet sample and end one of refining furnace are almost same while other elements keep the same from end of smelting to continuous casting finished .

RAAHE钢厂过程控制和连铸机动态二次冷却模型

Process control models at RAAHE Steel Plant & dynamic secondary cooling model for CCM

介绍采用转炉、LF炉精炼、小方坯连铸机、高速线材轧机生产工艺试制ML08Al冷镦钢的过程。

To introduce the trial production process of ML08Al cold heading steel adopting the process of converter steel-making , LF refining , billet continuous cast and high speed wire rod mill .

LTS-82型一位机在小方坯连铸机中的应用及调试

The Application and Adjustment of LTS-82 One-Bit Microcomputer at Billet Caster

本文描述了涟钢CSP连铸机从投产以来为了提高连浇炉数所采用的各种方法和措施，以及采用这些方法和措施所后涟钢CSP生产线所取得的成果。

This paper described all kinds of ways and means to increase sequential casting heats after CSP caster casting first heat liquid steel , and it described a good achievement 1 after adopting the ways and means .

莱钢4号连铸机生产320mm×410mm矩形坯的改造

Modification on No.4 caster for 320mm × 410mm rectangular bloom at Laiwu Steel

介绍安钢120t转炉炉卷轧机工程中宽板坯连铸机的工艺、装备及技术特点。

This paper introduces the process , equipment and technical features of the wide slab caster of the 120t converter - steckel mill project in Anyang Steel .