翼部
- 名transept
-
地质结构多处于褶皱的翼部;
The geology structure often lies in the wings of wrinkle ;
-
因此在效果上是加大了脉冲谱翼部的陡度。
Then the effect is to steepen the flanks of the pulse spectrum .
-
将褶皱翼部平分的理想面称为轴面。
The imaginary surface bisecting the limbs of the fold is called the axial surface .
-
提高卷状矿床翼部矿体浸出液铀质量浓度的措施
Measures to raise uranium content in pregnant solution from " tails " of roll-type ore body
-
多翼离心风机的三维数值分析地质结构多处于褶皱的翼部;
THREE DIMENSIONAL NUMERICAL ANALYSIS OF MULTIBLADE FAN the geology structure often lies in the wings of wrinkle ;
-
相反,鼻肌翼部是鼻翼的主要扩张肌,使鼻翼外张。
By contrast , the pars alaris is the primary dilatory muscle of the ala and is responsible for alar flaring .
-
煤层气开发有利区应在向斜翼部和岩墙、岩床附近变质程度高的煤区。
The exploiting area should be in the synclinal profile , dike and bed rock with the high level of the coal metamorphism .
-
背斜顶部为水层受构造形成期和早期油藏含油范围控制的背斜翼部油藏&新立油田;
Oil reservoir located in an anticline containing water at its top and governed by a combination of the paleo-and current structure & Xingli oil field ;
-
采用模型层析法,可消除地层大倾角、大幅度构造翼部产生的速度畸变,获得精细准确的构造图。
Geodetic inclination angle , large scale of velocity distortion caused by tectonic wings are eliminated , thus an accurate structural diagram is obtained . model .
-
裂侧鼻肌翼部可能是患侧鼻翼软骨旋转、移位及后退的最重要因素;
The pathological action of the alar part of the nasalis muscle may be the most important factor to the deformities of alar cartilage on cleft side ;
-
断裂翼部和斜坡翼部都具有不同于油田主体的半独立成藏特点和油气分布规律。
There are half - independent reservoir forming characteristics and oil-gas distribution rule in the fault wing and slope wing , which are different from the main oilfield .
-
裂谷东部主要以半深海-深海相的浊积岩、放射虫硅质岩和笔石页岩为特征,裂谷西部和翼部则以浅水盆地相和台地相的碳酸盐为特征。
The turbidite , radiolarite and graptolite that formed from half - deep - sea to deep sea facies are developed widely in the east of the rift zone .
-
昭觉、布拖断凹和凉山断穹虽然出露地层较老,但其深部、背斜翼部及向斜部位仍是有希望的地区。
Although Zhaojiao fault sag , Butuo fault sag and Liangshan fault dome exposure strata remotely , their deep part , anticlinal flanks and syncline still are hopeful areas .
-
矿体具体受断裂交汇部位附近的次级短轴背斜轴部、倾伏背斜的倾伏端及其翼部被纵向陡倾角断裂构造所切穿的部位控制,是断裂导矿与背斜构造圈闭的体现。
Controlled by structure trap , ore body located in the core of the brachy anticline or pitch part of plunging anticline which was intersected by high angle longitudinal fault .
-
本研究区受岩性和构造双重因素控制,岩性油气藏储层发育区主要集中在构造的翼部、深凹区、斜坡区。
The area affected by two factors control the lithology and structure , lithologic reservoir development area mainly concentrated in the structure of the wing , furrow area , slope area .
-
矿体受地层和构造联合控制,一般产在褶皱的层间剥离裂隙、构造裂隙及节理中,或产于褶皱翼部的断裂破碎带内。
Ore bodies are jointly controlled by both strata and structures , and usually they are distributed in folded layers'fissures , structural fissures and joints or in the broken belts of fold flanks .
-
第一阶段为加里东晚期&海西早期,发育向斜翼部侵蚀洼地排泄型和向斜轴部山间洼地排泄型古岩溶;
The first stage was from Late Caledonides to Early Hercynian Period , and two exposed palaeo-karst types of erosion depression discharge in syncline wings and intermountain depression discharge in syncline axle developed .
-
井田中部瓦斯涌出量较小,浅部、深部和井田的东西翼部涌出量大。
Gas emission volume is relatively small in the middle part of the mine field , and the gas emission volume is large in the shallow and deep parts and on east and west wrings .