系统主机

  • 网络System Host
系统主机系统主机
  1. 不要在任何MQ对象的名称中使用空格,包括系统主机名称。

    Do not use spaces in any names of MQ objects , including system host names .

  2. 作为一种外部总线,USB提供设备与系统主机的通信接口,USB主机管理各类USB设备及USB传输,调度器的设计是USB主机控制器驱动的主要部分。

    USB provides the interface for system host and USB devices . The USB host is dedicated to managing all USB device and transfer of the system .

  3. 这个程序用来配置系统主机名、IP地址和其他网络参数。

    This is used to configure the systems hostname , IP address , DNS and other network parameters .

  4. 如果主系统主机发生错误,虚拟IP地址就切换到备用机上。

    In the event of a failure on the primary host , this virtual IP address fails over to the standby .

  5. 使用USB技术作为矿井监控系统主机主站之间的接口是完全符合要求的。

    USB technology in Mine Monitoring System as the interface between the mainframe and main station meet the requirement .

  6. 本论文基于C/S的计算模式,采用IBMAS/400作为系统主机,IBMUDB/400作为后台数据库,运用BusinessObjects软件统计分析公司业务数据,实现了西南航空公司的净收入管理系统。

    With the adoption of IBM AS / 400 , IBM UDB / 400 and Business Objects software , we have realized the southwest airline revenue management system .

  7. 系统主机为美国DUAL公司的16位微机,系统接口按IEEE696S-100总线标准设计。

    Host computer of the system is a 16 hit microcomputer made in DUAL Inc. , USA. The system interface is designed accord - ing to the IEEE Std. 696 ( S-100 ) BUS .

  8. 利用BACnet网关,实现了专有控制系统主机和BACnet操作员工作站的通信。

    Using BACnet gateway , host computer of private controlling system can communicate with BACnet operator workstation .

  9. LCF型列车超速防护系统主机模块化软件的研究

    A study on modularized software of MASTER-STA-TION in automatic train overspeed protection system

  10. 系统主机采用DJS-040(CROMEMCOCSⅢ)微型计算机系统。

    The DJS-040 ( CROMEMCO CS ⅲ) microcomputer system is taken as the main system .

  11. 所设计的MBI通信软件完成传输层的功能,使接口卡具有智能性,减少了子系统主机的干预,符合航空电子工程要求。

    MBI software realizes function of transport layer , reduces the intervention of subsystem and meets avionics specifications .

  12. 采用BMC软件公司提供的第三方PATROL管理软件来实现对系统主机、网络和应用的统一集中监控。

    With the third party PATROL management system provided by BMC , it becomes possible to conduct centralized monitoring and control of the system host , networks and applications .

  13. TM-6测试系统主机改造与系统软件开发

    Improving the I-100 Computer of TM-6 Test System and Developing the System Software

  14. 本文提出了以PC机作为锆钛酸铅压电陶瓷堆(PZT)微位移装置控制系统主机的方案,从而高效、高速地控制PZT微位移装置,使其能实现变速、线性微位移的功能。

    This paper proposes a method in which personal computer is used as the main processor of the controlling system in order to control piezoelectric transducer ( PZT ) micro-shifting device at high speed and efficiently , and make the device move in variable speed and linearly .

  15. 调监系统主机网络化数据传输的应用

    Application of Centralized Traffic Control of Host Network for Data Transmission

  16. 基于光纤通道的高速数据传输系统主机接口设计

    Host Interface Design of High-Speed Data Transmission System Based on Fibre Channel

  17. 分布式控制系统主机与终端的通信

    The Communication between Computer and Terminal for Distributed Control System

  18. 工业碾米机的单片机测控系统主机采用工业测控机。

    This system adopts an industrial control computer .

  19. 计算机测控系统主机局部区域网

    Local Area Network of the Host Microcomputer in a Microcomputer-Based Measuring and Controlling System

  20. 测控系统主机双向并行通信的设计

    Design for the two-way parallel-communi cation interface of the principal computer in the measurement and control system

  21. 系统主机的设计及系统激励信号和系统电磁兼容的设计。

    Design of the host system part , the sine burst signal and the system Electromagnetic Compatibility .

  22. 佩里茨在从事法律职业前担任过电脑系统主机软件工程师和编程师。

    Before entering the legal profession , he was a software engineer and programmer for mainframe computer systems .

  23. 软件控制模块设计主要是建立系统主机和从机控制模型,完成主、从机主程序和子程序的设计。

    The software design primarily to establish the control model . Designing the program and subprogram of the system .

  24. 本文介绍了森林生态因子自动检测系统主机部分的硬件结构和程序设计方法。

    The hardware structure of main computer and method for program design of automatic monitoring system of forest ecological factors were introduced .

  25. 本文介绍一台用286机作为主机的智能测试仪,包括286机作为实时测试系统主机的优点、286机的接口卡与软件设计。

    This paper introduces an intelligence tester which based on 286 microcomputer , including its features , the interlock and the softwares .

  26. 同时系统主机信息包含很多的系统信息(数据)必须严加保护,防止未经授权的用户访问、修改、删除有关信息。

    Simultaneously the host system containing many system messages ( data ) muse be strictly protected to prevent the user visit , the revision , the deletion related information without authorization .

  27. 针对目前预分解窑的发展与配置现状,重点研究了华新五号窑预分解窑系统主机设备的选型特点,此外,对该系统的设备优化配置对窑系统产量与其它性能的影响进行了讨论。

    Based on the development and actuality of precalcining kiln , characteristics of the major facilities of the precalcining kiln system in the fifth kiln of Huaxin Cement Co Ltd were discussed .

  28. 利用模块化设计思想实现主机系统主机人机界面的设计、各部分软件模块的无缝连接及调度,最终构建了一套适合手指静脉身份识别的智能系统。

    Using modular design thought to achieve host system human-machine interface design , various parts of software modules to connect seamlessly and scheduling , eventually build a set of intelligent finger vein identification system .

  29. 该系统主机采用组态软件做控制软件,它取代了原来的人工控制台,并在距离原控制室近千米外的新控制室实现了远程控制和原控制台现场信号的再现。

    The mainframe of the system adopts configuration software as the control software , replacing the man control and can be used for remote control from 1000 meters away from the new control room .

  30. 并对其中系统主机数据库磁盘空间的划分,业务基础数据的测试,应用服务器软件和硬件的配置,以及网络设备的配置和流量控制,进行了详细的调研和规划。

    And to which the system hosting the database disk space division , the business-based data , testing , application server software and hardware configuration , and network device configuration and traffic control , carried out a detailed research and planning .