生成物

在生成物里面，没必要把这两个q分开。

I didn 't need to separate that into this product .

P4O（10）-Al（OH）3-H2O中生成物及热变化的研究

The Study ot Product and Heat Change in P_4O_ ( 10 ) 1-Al ( OH ) _3-H_2O

讨论了几种原材料对B组分及反应生成物性能的影响。

The influence of several raw materials on the performance of the B-component and its reaction products were discussed .

开始时溶液里有，的混合物反应物，in，solution，and，C，and，D，和生成物在一起。

A B And so we start out with a mixture of the A and B C D reactants and products together .

反应的△H是多少？，它就是生成物的生成焓减。

It 's delta H of formation of the products minus delta H of formation of the reactants .

从X射线衍射图谱可以看出，pH值在9.5左右，生成物具有明显的晶体特征。

We can see from X-ray spectrum , while pH value is around 9.5 , formation substance has significant crystal characteristics .

喷油提前角延迟，则NOx生成物降低，放热率也有所降低。

Injection delay results in reduction of NOx and rate of heat release .

等离子体技术净化CF4及其生成物机理的探讨

Study of Purifying Mechanism for CF _ 4 and Products by Plasma Technique

X射线衍射谱表明，在复合材料的显微组织中TiC是惟一反应生成物。

X-ray diffraction analysis shows that TiC is the only phase produced by in situ reaction in composites .

SF6及SF6混合气体火花放电生成物分析

Analysis of Spark Decomposition Products of SF_6 and SF_6 Mixtures

所以这里△H就是所有生成物的，生成热的和，对吧？

So here , I 'm going to have delta H , is just the sum for all the products of delta heat of formation right ?

Al2O3-H3PO4体系中生成物及热变化的研究

The Study of the Resultant and Heat - Change in the Al_2O_3-H_3 PO_4 System

煤的热解研究III.煤中官能团与热解生成物

Fundamental Study of Coal Pyrolysis III. Functional Group and Pyrolysis products

元素碘原位生成物作为链转移剂引发VAc的DT聚合。

Degenerative transfer polymerization of VAc in the presence of elemental iodine .

通过不同温度下生成物的结构及形貌变化，研究了SiC晶须的生长机理。

The growth mechanism of SiC whisker was studied through comparing the changes of structure and morphology of the products at different temperatures .

生成物CO2及剩余反应物浓度随时间变化的实验结果表明，该种反应为零级反应。

From the change of the concentration of the reactant and product CO2 detected by gas chromatographs , the reaction 's order is confirmed as zero order .

孔隙的形状和大小取决于原料Al和生成物FeAl的分布和大小；

The shape and size of pore is related to the distribution and size of Al and FeAl ;

利用体外试验方法（InVitro）、SEM/EDAX及FTIR技术对浸泡不同时间的溶胶-凝胶生物活性玻璃颗粒的表面形貌、成分变化及表面生成物、生成时间及反应机理进行分析测试及理论探讨。

The surface morphology , composition , reaction products and reaction mechanism of the glasses were investigated by in vitro , SEM / EDAX and FTIR techniques .

结果表明：纳米SiO2的掺入降低了水泥水化生成物Ca（OH）2含量，增加了水泥水化的化学结合水量及水化放热量。

The results show that the presence of nano-silica powder decreases Ca ( OH ) _2 content , but increases chemically-combined water content and heat of hydration .

在N2气氛中以粉煤灰为原料，采用碳热还原氮化工艺制备了β-Sialon粉体，研究了碳含量、合成反应温度、保温时间和氮气流量等因素对生成物物相的影响。

β - Sialon powder was prepared from fly ash and carbon black via carbothermal reduction nitridation in this study .

通过控制反应体系终点pH值、反应时间和反应温度制得含CO32-的羟基磷灰石，并用XRD和IR技术分析了生成物的组成和结构。

Controlling the pH value of the reaction environment , the reaction time and the reaction temperature , carbonate-containing HA was obtained . XRD and IR examined its structure and composition .

DDS是绿色的水处理系统，所需的原料和生成物都属于自然界存在的物质，无二次污染的发生。

DDS is a green or natural water treatment system , with both material and results being natural . No secondary pollution is produced .

用US／VIS分光光度计测量了生成物的透过率发现其透过率在紫外部分较ITO膜提高；

The US / VIS spectrophotometer was used to measure the transmissivity of TiSi 2 film and found the transmissivity of TiSi 2 was higher than that of ITO film .

利用X射线衍射仪分析了SF6/CO2混合气体中放电电极表面的固体生成物，并分析了生成物的形成机理。

The solid products formed on the surface of electrodes in sparked SF6 / CO2 gas mixture is checked by means of XRD and the formation mechanism of these products is analysed .

由四极质谱仪的分析结果发现，CF4等生成物的谱峰强度随射频（RF）功率的增加几乎线性地减小。

From quadrupole gas analyzer , the intensity of spectral peaks for CF 4 and products reduces almost linearly with increase of RF power .

铝热反应Fe2O3＋2Al→2Fe＋Al2O3产生的热量使生成物处于熔融状态，在离心力的作用下，Fe和Al2O3发生分离，从而形成陶瓷复合钢管。

The aluminithermic reaction Fe_2O_3 + Al-Fe + Al_2O_3 can produce melting products of Fe and Al_2O_3 which can be separated under centrifugal force to form ceramic & steel composite pipe .

SF6分解后可复合，不分解含碳等的有害绝缘物质，在严格控制水分的情况下，生成物无腐蚀性。

SF6 decomposition after compound does not break down the harmful carbon and other insulating materials , strict control of moisture in the circumstances , the resultant non-corrosive .

点燃后的生成物主要是敌敌畏、二氧化碳，还有少量的CO、NO、NO2、C1、HC1和残存的敌百虫等。由于敌敌畏的毒力比敌百虫大和其它气体、烟微粒生成物有增效作用；

Essential products of the smoking formula after burning are mainly DDVP , CO_2 and small amount of CO , NO , NO_2 , HCl , Cl_2 , Dipterex and so on .

总结了相对湿度、原料气组成、生成物和改性方法等工艺条件对ACF吸附H2S性能的影响。

The factors that affect adsorpting of H2S , including the relative humidity , the component of the feed gases , the resultants and the methods of modification , were also discussed .

本文研究了a－Si／Ti叠层膜在180℃温度下的互扩散，利用XPS分析发现Ti、Si原子具有相等的原子浓度，生成物为TiSi；

Mutual diffusion of a-Si / Ti layers studied at 180C by using XPS analysis has indicated that the atomic concentration of Ti and that of Si is almost equal and the prod - uct obtained is TiSi .