金属纤维

研究制备了一种用于电力机车导电滑块的新型导电摩擦材料&金属纤维增强压型不透性石墨（MFRMIG），其主要性能指标为：弯曲强度82MPa；

Deals with a novel conductive friction material , metal fiber reinforced moulded impermeable graphite ( MFRMIG ) . The new material owns excellent properties with bending strength : 82 ? MPa ;

当湿式振动矩形金属纤维栅为6片，风速为3.3m/s时，纤维栅在当量直径为0.074mm和0.109mm时的最大过滤阻力分别为488Pa和500Pa。

As of the two kind of wet vibration flat metal fiber grid equals 6 and the air velocity to 3.3 m / s with the maximum resistance equal to 488 Pa and 500 Pa , respectively .

金属纤维燃烧器CO和NOx排放特性

Emission Characteristics of CO and NO_x from Metal Fibre Burner

贵金属纤维催化剂的CH4催化燃烧活性

Catalytic Combustion of Methane Over Noble Metals Supported on Fibers Catalysts

金属纤维毡PVA表面改性超滤膜的研究

Research on PVA Modified UF Membrane Based on Felt-metal

NaOH溶液对羊毛和金属纤维溶解度的影响

Effect of NaOH solution on solubility to wool and metal fibers

金属纤维增强PTFE基复合材料的摩擦学性能

Study of Friction and Wear Properties of Metallic Fiber Filled PTFE Based Composite

水平V形砧锻造法在内部应力状态、金属纤维组织、锻件的整体性能、宏观几何形状等方面都优于普通平砧锻造法。

The forging method is superior to the common flat anvils ( FA ) forging method in inner stress states , metal tissue , overall properties and geometrical shapes of forgings .

分析了在不同NaOH溶液浓度、处理时间、碱液温度条件下，羊毛纤维与金属纤维的溶解度。

The solubility of wool and metal fibers under various NaOH solution concentration , treatment time , and treatment temperature were investigated in this paper .

羊毛和金属纤维按照一定重量比例混合，然后放入浓度为5%的NaOH溶液中沸煮，处理后金属纤维含量减小0.28%。

Blending wool and metal fibers according to special ratios , then put the blend into boiled 5 % NaOH solution , metal fibers content decreased by 0.28 % after NaOH solution treating .

吸声用烧结FeCrAl纤维多孔材料是金属纤维领域一个新的研究方向。

Sintered FeCrAl fibrous porous materials used in sound absorption field is a new study orientation in metal fibrous technology area .

试验得到羊毛纤维的碱解溶度随NaOH溶液浓度增加，随处理温度的升高及处理时间的增大而明显增大，而金属纤维的碱解溶度变化很小。

Experimental results showed that the solubility of wool fibers increased with the increase of NaOH solution concentration , treatment time , and treatment temperature . However , the solubility of metal fibers had little change .

针对东海平湖油田的特点，确定了该油田A3水平井合理的完井方法是：割缝衬管先期完井和金属纤维防砂筛管后期防砂。

According to the properties of Pinghu oilfield in East China Sea , the well completion method of A3 horizontal well is determined as initial well completion by slotted liner and later sand control by metal fibre screen pipe .

本研究首先使水凝胶与金属纤维网实现微观机械嵌锁连接，然后用骨水泥（PMMA）将纤维网面与底层骨（或金属）粘接。

In this study , PVA hydrogel is attached to the metal fibre mesh by means of micro mechanical interlock methods at first , then the surface of metal fibre mesh is bonded to the underlying bone by the bone cement ( PMMA ) .

在大孔径金属纤维毡上制备了金属-聚乙烯醇-二醋酸纤维素（金属-PVA-CA）共混复合超滤膜及金属-NaCl改性PVA-CA共混复合超滤膜。

The metal - ( polyvinyl alcohol ) - ( cellulose diacetate ) blend composite ultrafiltration membrane and metal-NaCl modified ( poly vinyl alcohol ) - ( cellulose diacetate ) blend composite ultrafiltration membrane were prepared for the first time based on felt-metal .

长金属纤维／聚丙烯抗静电复合材料的制备与性能

Preparation of Antistatic Composite with Long Stainless Steel Fiber and Polypropylene

金属纤维燃烧器在中餐燃气炒菜灶的应用

Application of Metallic Fibrous Burner in Chinese Cooking Hot - plate

金属纤维燃烧器系统阻力特性的实验研究

Experimental Research on the Pressure Loss Performance of Metal Fibre Burner

金属纤维增强义齿基托料的研究

The Research on Metal Fibre Strengthen False Dentur Material of Baseplate

金属纤维燃烧器具有低污染排放的特点。

The metal fibre burner is characterized by low pollution emission .

金属纤维抗菌作用的初步研究

A Preliminary Study on the Effect of Metal Fiber on Microorganism

在实验的基础上，分析了金属纤维形成的条件和切削过程的动态行为。

The condition and dynamic behavior of fibre formation are analyzed .

金属纤维加热技术在就地热再生设备上的应用

Application of Metal Fibre Heating Technology to In-situ Hot Reclaiming Equipment

金属纤维烧结毡在过滤与分离行业中的应用

Application of Sintered Metal Fibre Fele to the Filtration & Separation Industry

开发金属纤维燃烧器&提高天然气应用技术

Developing Metal Fiber Combustor To Improve Natural Gas Application Technology

金属纤维长度对胶合板性能的影响

Effects of Different Metal Fiber Length on Performances of Plywood

金属纤维毡在燃煤锅炉烟气除尘中的应用研究

The Study on Metal Fiber Felt in Dust Removal of Coal-fired Boiler

金属纤维在常规纺纱设备上的牵切实践

The Drafting and Cutting Practice of Metal Fiber on Conventional Spinning Machine

金属纤维复合材料的电磁波吸收特性的研究

Research on metal fiber composite absorption characteristic of electromagnetic wave

金属纤维燃气红外线燃烧器在热水锅炉上的应用

Application of the Metal Fiber Gas-infrared Burner in the Hot Water Boiler