输送带接头

钢丝绳芯输送带接头搭接工艺的改进

Improvement of Steel Wire Rope Core Belt Lacing Lap Joint Craftwork

输送带接头硫化工艺分析及维护方法

The Vulcanizing Process Analysis and Maintenance of Conveying Belt Joint

输送带接头工艺措施多引线接头封接工艺

Process Of Improving Conveyer Fittings The Technology of Multiple Lead Connection Sealing

钢绳芯输送带接头实时监测系统设计

Design on Time Monitoring and Measuring System of Steel Cable Belt Connector

普通输送带接头阶梯加工工艺改进

Technology improvement of common conveyor belt connect step working

钢丝绳芯输送带接头硫化工艺安全管理

Safety management of sulfidation process for the connecter of rope core conveyer belt

钢芯输送带接头损坏原因及一次破断试验研究

Cause of joint failure in conveyor steel core belt and study of broken test

描述了输送带接头工艺，提出了保证硫化接头强度的措施。

Describes the conveyer fitting process and suggests actions to ensure strength of vulcanized fittings .

输送带接头工艺措施

Process Of Improving Conveyer Fittings

强力输送带接头防断裂探测报警系统的设计与实现

Design and Realization to the Anti-Crack Detection Alarming System for the Joint of the High-Intensity Conveyor Belt

钢丝绳芯带式输送机在各行各业中具有广泛的应用，其中钢丝绳芯输送带接头质量是否过关，将直接影响到输送机能否实现正常运行。

The wire rope conveyors have extensive used in all professions , in which joint quality is or not up to standard , to direct affect conveyor that can or not normal operate .

GB/T12736-1991输送带机械接头强度的测定静态试验方法

Conveyor belts-Determination of strength of mechanical fastening-Static test method

输送带的接头是整个输送带中的薄弱的地方，接头的强度要低于输送带的额定强度。

The splices represent weak spots in the conveyor belt . The strength of the splices is lower than the nominal strength of the belt .

论述了长距离、大运量带式输送机的国内发展现状及其动态分析、软启动装置、水平转弯、存仓、料斗、输送带及其接头的监控等关键技术。

This paper covers development and application of long-distance large-capacity belt conveyors in China as well as researches on such key technologies as dynamics analysis , soft starting devices , horizontal bends , storage bins , hoppers , belts and joints .

输送带热硫化接头过程中常见问题及对策

Common Faults and Solutions in Ends Connection of Steel Belts by Vulcanization

钢丝绳芯输送带及硫化接头的管理

Management of steel cable conveying belt and vulcanizing joint

特种聚氨酯刀片：具有耐磨损，低摩擦，高弹性，抗冲击，使用寿命长的特点，不损伤输送带和机械接头。

Special PU blade : It has characters such as wear resistance , low friction , high elasticity , impact resistance , long working life , no damage to conveyer belt and mechanical joint .

主要用于输送常温材料的输送带接头。

Mainly used to joint for conveying belt normal temperature materials .

根据图像重建实现对输送带内部钢绳分布的视觉检测，监测输送带接头断裂情况。

Visual detection was realized basing on the imaging reconstruction of steel-cord distribution , which can be used to detect the joint breaking .

胶带与胶带接头的管理好坏是保证输送机正常运转的关键。本文详细地介绍了钢丝绳芯输送带的使用和维护方法，以及输送带硫化接头的管理办法

The management of belt and belt joint is the key of ensuring conveyor normal operation This paper introduces the using and repairing method and management method of the conveying belt vulcanizing joint

对输送带过渡段和翻转段进行分析，得到输送带在宽度方向张力的分布情况，进而为输送带接头的设计研究提供一定的理论参考。

Getting the tension distribution in belt width through analysis the belt in transition section and turnover section can provide certain theoretical reference for the design and research of the conveyor belt joint .