补偿原理

TSC动态无功补偿原理与在天车上的应用

TSC Dynamic Reactive Power Compensation Principle and its Application in Overhead Crane Residual Life Estimation of the Sub-truss Beam with Hollow Web in Overhead Crane

在此基础上，简要分析TCR+TSC型静止无功补偿器控制系统的组成和补偿原理，结合MatlabSVC仿真模型，分析模型内部结构，研究控制策略。

Based on this , the structure of static var compensator control system and compensation principle is briefly analyzed in this paper . With the Matlab SVC model , analyzes the model internal structure and its control strategy .

C语言程序实现数控加工刀具半径补偿原理与坐标计算

Cutting Tool Radius Compensation of NC Processing and Coordinate Figure Computation of C Procedure Realization

基于2D自适应补偿原理的压电自感知执行器振动信号分离技术

Vibration Signal Separation of Piezoelectric Self-sensing Actuators Based on Two-dimensional Adaptive Compensating Principle

利用反向补偿原理控制硅CVD外延层中的金属杂质和微缺陷

Controlling metallic impurity and microdefect in silicon CVD epitaxy layer using contrary compensation

基于补偿原理的正激式变换器传导共模EMI抑制

The Study of CM EMI Suppression in Forward Converter Based on Passive Compensation Technique

介绍了C功能刀具半径补偿原理，根据平面内刀具半径补偿转接过渡的不同转接类型，针对C功能刀补的工程实际应用，提出了交角转接及直接转接两程序段间的软件实现方法。

The theory of C function cutter radius compensation is presented . The Join-Turning type and the method of software performance is analyzed . The practical use is researched .

TCR动态无功补偿原理及滤波器参数的计算

Principle of TCR dynamic reactive power compensation and the calculation of filter parameter

针对此问题，基于相位补偿原理设计了TCSC的附加阻尼控制器。

A supplementary damping controller of the TCSC is then designed to solve this problem .

在深入分析了对称化补偿原理的基础上，推导出用于SVC的数字化无功补偿算式。

After groundwork of deep analysis of theory of symmetrical components the digital compensating algorithm used in SVC is reduced .

一种交错并联断续模式单级PFC变换器的研究基于补偿原理的正激式变换器传导共模EMI抑制

Investigation on an Interleaved Discontinuous-Current-Mode Single-Stage Power-Factor-Correction Converter ; The Study of CM EMI Suppression in Forward Converter Based on Passive Compensation Technique

基于刀具半径补偿原理，在matlab中仿真并实现了一种新型的刀具半径补偿算法，该算法能有效剔除在缩短型刀具半径补偿情况下产生的冗余刀位点。

Based on the theory of tool radius compensation , an improved algorithm is simulated and realized in matlab , which can remove redundant points in the case of shortening tool radius compensation .

文中讨论了使VCO线性化的电抗补偿原理并给出了用多节电抗网络补偿的VCO设计实例。

The principle of linearizing VCO by reactance compensation is discussed . The design of the practical VCO is given .

分析了控制系统前项通道和反馈通道接入Internet后网络传输延时对整个控制系统的稳定性和控制品质的影响，并依据补偿原理设计了补偿器。

This part analyzes the influence of network transmission time delays upon the stability and the control quality of the whole control system after the forwarding control channel and feedback channel of telecontrol system connect the Internet , and designs compensator according to compensation elements .

本文提出了一种利用补偿原理直接测量压电换能器串联谐振频率fs和并联谐振频率，fp的新方法一补偿法。

Put forward in this paper is a new and simple method for measuring the serial resonant frequency fs and the parallel resonant frequency fp of a piezoelectric transducer .

基于相位补偿原理设计了UPFC阻尼控制器，并对UPFC多种工作方式的阻尼效果进行了仿真分析。

The UPFC damping controller based on the principle of phase compensation is designed , and the damping effect is analyzed through simulation for various operation modes .

最后，从射线光学上和波动光学上分别推导了Bragg光栅对PMD的补偿原理，给出了光栅参数的设计。

In the last , theory of the Bragg Grating compensating PMD , based on the radial - and wave-optics in sorts is concluded , while devising the parameter of Bragg Grating .

提出了基于双DSP结构的有源滤波与无源滤波相结合的无功与谐波动态补偿原理和方案，设计了无功与谐波自动补偿装置主电路结构与控制系统。

This paper discusses the reactive power and harmonic dynamic compensation principle and their scheme combining passive power filtering with active power filtering based on dual DSPs . The main circuit frame and control system of reactive power and harmonic automatic compensation installation are designed .

基于刀具半径补偿原理、刀具半径补偿方向的判断法则和最小包围矩形算法，实现PCB板轮廓线数据的提取和刀具中心轨迹的生成；

Extraction of PCB contour line and generation of cutting tool center path are established on the basis of the tool radius compensation principle , the regulation of judging the direction for tool radius compensation and the minimum surround rectangle arithmetic .

表明与岩石圈物质水平运动的挤压&松弛（或拉伸）作用有关.在此水平运动背景上，Airy型补偿原理可被重新描述为正、负垂直密度矩相抵销。

With this background of the horizontal movement , the compensation principle of the Airy isostatic model can be redescribed as a compensation of positive and negative vertical dipole moments of local density distribution .

详细描述了高性能西门子S7-200PLC在糊口机同步控制系统中的应用，根据塑编行业生产线的特点，提出了基于PID和补偿原理的多电机同步控制方案。

This text details the application of S7-200 PLC on synchronized control system of sticking mouth of bag machine , and puts forward a multi-motor synchronous driving control system based on PID and compensation theory .

本文针对方形管切割加工特点提出了数控切割方案，对方形管变形误差进行了分析，说明了检测和补偿原理并详细论述了PMAC运动控制器在方管相贯端头数控切割加工中的应用。

This paper advances a numerical control cutting method of quadrate pipe , analyzes its shape error , illuminates the principle of measure and compensation and introduces the use of PMAC motion controller in CNC cutting intersecting end of quadrate pipe .

建立了比较完善的UWB波形产生系统模型，基于线性系统理论和数字产生方法的灵活性、可靠性，分析了波形产生系统失真的数字补偿原理和可行性。

In the first place , the all-around models for UWB waveform generation systems are made . Based on the linear system theory , and the flexibility and reliability of digital generation methods , the principle and the feasibility of digital compensation for waveform generation systems are analyzed .

主要利用电阻的温度系数与阈值电压VTH温度系数相同的特性实现温度补偿原理。

It compensates for the temperature characteristics of the resistor and the threshold voltage VTH in such a way that the reference current has small temperature dependence .

分析了级联AWGs器件系统色散补偿原理，推导出经过色散补偿后的脉冲波形的解析表达式，以线性啁啾脉冲代入此表达式分析验证了补散的有效性。

Analyzing the theorem of cascade AWGs for dispersion compensation system , taking a linear chirp pulse for example , this article obtain the expression of compensated pulse distribution .

文中论述了管切割误差补偿原理，管切割机设计和加工方案，数控系统的硬件的组成，软件的流程及具体的编程实现，PMAC运动控制程序的编写和实现等内容。

The paper describes the method of compensating cutting pipe error , the design of the machine , the compose of the hardware in NC system , the NC program flow and its realization , and how to write motion control programs in PMAC etc.

对于存在相关噪声干扰的Box&Jenkins系统，本文借助于偏差补偿原理，推导了一个偏差补偿最小二乘（BCLS）辨识方法；

For Box-Jenkins systems with correlated noises , a bias compensation least squares ( BCLS ) identification method is proposed by means of the bias compensation principle .

另外，根据射频补偿原理设计了用于降低射频干扰的扼流线圈，制作朗缪探针并安装于RF-500型真空镀膜机上。

In addition , chocks are designed to reduce radio frequency interference based on RF compensation theory , and self-made Langmuir probe is installed on RF-500 vacuum filming machine .

针对现有电阻、电容、电感参数精确测量的复杂性，提出了一种全新的基于步进反馈补偿原理的集中参数RCL精确复用测量方法，并对此测量方法进行理论论证。

Aiming at the complexity of accurately measure of centralized parameters ( Resistance , Capacitance , Inductance ), we proposed a innovative accurately composite measure method of centralized parameters based on stepping feedback compensation . And then proved this measure method .

微波辐射计增益波动的自动补偿原理及方法

Automatic compensation principle and method in gain wave of microwave radiation