蠕墨铸铁

蠕墨铸铁在柴油机部件上的应用

Application of CGI in the parts and components of diesel engine

同时又对蠕墨铸铁铣削机理进行建模仿真研究，进一步为实际应用提供指导。

Meanwhile , this research carries out the finite element simulation analysis on the Compacted graphite iron milling mechanism to guide the practical application .

基于BP神经网络蠕墨铸铁性能建模及其应用

Modeling on the Characteristics of Vermicular Graphite Cast Iron and It 's Application Based on the BP Neural Network

SG对薄壁蠕墨铸铁件蠕化范围的影响用冲天炉生产蠕墨铸铁件的试验

The Effect of SG on the Compacted Range of Graphite in Thin Section Castings of C / V Cast Iron

蠕墨铸铁CA6110柴油机缸体的试验研究

Experimental Study on Compacted Graphite Iron CA 6110 Diesel Engine Cylinder Block

在现有汽缸体高压造型生产线上进行大马力柴油机蠕墨铸铁缸体的试验，试验铁液化学成分w为3.6%~3.9%C；

Experimental study on casting technology of compacted graphite iron powerful diesel engine cylinder block was carried out on existing cylinder block high pressure molding line . The composition of base iron was 3.6 % ~ 3.9 % C ;

通过对蠕墨铸铁即紧密石墨铸铁（CGI）的微观组织、石墨形态、疲劳破坏机理的分析及在高温下的强度和应变的试验，说明了这种铸铁具有良好的疲劳可靠性和高温强度。

Analysis of the microstructure , graphite form , fatigue failure mechanism of compacted graphite iron ( CGI ), its high temperature strength and strain tests demonstrate that CGI has excellent fatigue reliability and high temperature strength .

4.5t蠕墨铸铁钢锭模在使用过程中热应力的测定

Thermal stress measurement of 4.5t ingot mold of vermicular graphite cast iron in service

玻璃模具用Ti-V-Cu-Cr蠕墨铸铁的研制

Developing Ti-V-Cu-Cr Compact Cast Iron for Glass Molds

为适应柴油机高性能的要求，HX型气缸盖选用了蠕墨铸铁材料，是一种典型的难加工材料。

In order to adapt to the high performance required by the diesel engine , HX type cylinder head chooses Compacted graphite iron is chosen as the HX type cylinder head material which is difficult to machine .

蠕墨铸铁硼缸套的耐磨性

Wear Resistance of Cylinder Liner of Compacted Cast Iron Containing Boron

蠕墨铸铁的低周疲劳裂纹扩展速率

Low cycle fatigue crack growth rate of compacted graphite cast iron

蠕墨铸铁缸盖的生产及应用汽车蠕墨铸铁件的应用与发展

Application and Development of Vermicular Iron Castings Used in Automobile Industry

微合金化蠕墨铸铁玻璃模具材质的研究

Study on Micro-alloying Compacted Graphite Cast Iron Used in Glass Mould

蠕墨铸铁客车制动盘的铸造工艺与组织性能

Casting Procedure and Microstructural Properties of Compacted Graphite Iron Brake Disk

磷硼蠕墨铸铁压榨辊的铸造生产

Foundry Production of Squeeze Press Roll with Phosphor-boron Vermicular Cast Iron

从汽车行业的发展看蠕墨铸铁的应用前景

Prospect Forecast of Vermicular Iron from the Development of Automobile Industry

采用蠕墨铸铁生产焦炉耐热部件

Manufacturing of Coke Furnace Parts by Vermicular Graphite Cast Iron

含钒蠕墨铸铁干摩擦学性能

Tribological Properties of Compacted Graphite Cast Iron Bearing Vanadium under Dry Sliding

中国蠕墨铸铁40年

The 40 Years of Vermicular Graphite Cast Iron in China

蠕墨铸铁中微量钙的光度法测定

Determination of Trace Amounts of Calcium in Vermicular Cast Iron

喂丝法生产蠕墨铸铁的研究

A Study on Using Cored-Wire Injection Process to Produce Vermicular Cast Iron

钒钛蠕墨铸铁大型钢锭模的组织与性能

The Microstructure and Properties of Vanadium-Titanium C / V Iron Ingot Mould

蠕墨铸铁硼铬共渗的研究

Study on the Boron - Chromizing of Cast lron with Worm Graphite

超薄壁蠕墨铸铁排气管制造

The Manufacture of Ultra Thin Wall Exhaust by Vermicular Graphite Cast Iron

蠕墨铸铁生产新方法的研究

Study of a new method for making vermicular cast iron

蠕墨铸铁制动盘台架试验研究

Bench Test and Research on Brake Discs of Vermicular Graphite Cast Iron

中硅耐热蠕墨铸铁的研究及应用

Study on Medium silicon Heat resistant Compacted Graphite Iron and Its Application

稀土在蠕墨铸铁中的适宜残留量范围

The Proper Range of Residual Rave Earth in Vermicular Graphite Cast Iron

蠕墨铸铁同质焊缝冷裂纹启裂与扩展研究

Study of cold crack initiation and propagation of compacted graphite iron weld