脉冲控制器

本文介绍了一种采用STD总线标准的通用可控硅触发脉冲控制器。

A SCR firing pulse controller adopting the STD BUS standard is introduced .

其次，结合X公司新型脉冲控制器产品（中国）有限公司的现状，分别从项目产品的用途、技术可行性和需求及风险三方面分析了燃气具发展因素。

Secondly , combining with new type pulse controller products X company ( China ) co. , LTD. , it analyzes the fuel gas development , respectively , from the project , technical feasibility , and the purpose of the product demand and risk factor three aspects .

在已有专利&脉冲控制器的基础上，构建了Tandem型的双丝脉冲MIG焊接系统。

This paper built Tandem-type double-wire pulsed welding system based on the patent of the pulsed controller .

再次，利用SWOT分析法分别从优势、劣势、机会和威胁四方面对X公司燃气具行业进行市场分析和定位，在此基础上，提出燃气具脉冲控制器的营销战略。

Again , using the SWOT analysis method , it analyses and positions gas industry market which X company face , respectively , from the strengths , weaknesses , opportunities and threats . On this basis , the marketing strategy of fuel gas pulse controller is putting forward .

具有丢包的离散奇异网络系统的脉冲控制器设计

Impulsive Controller Design of Discrete-time Singular Networked System with Packet Dropout

文章从理论上指出了设计时钟脉冲控制器与变速时钟发生器的必要性，同时介绍了它们的工作原理和设计方法。

It also introduces their operating principles and design methods .

通用智能化可控硅触发脉冲控制器

A general intelligent SCR firing pulse controller

设计了脉冲控制器，实现了正反相同步间的动态切换。

The impulsive controller is designed to switch the in-phase synchronization state and the anti-phase synchronization state .

针对给定的一类非线性奇异系统，设计了基于数据丢包的网络脉冲控制器。

Networked impulsive controller is designed for a class of nonlinear singular system based on data dropouts .

利用本文方法设计的网络脉冲控制器，能够保证具有数据丢包的非线性奇异系统实现指数稳定。

Using the given networked impulsive controller , exponential stability of nonlinear singular system can be ensured based on packet dropouts .

同时脉冲控制器设计为两路输出，按照推挽式设计，可进行双丝焊焊接。

Furthermore , the controller is designed for duplex output according to push-pull mode , which can be applied for double-wire welding .

通过设计混杂脉冲控制器，不仅使闭环系统保持容许性同时消除或尽可能减小不相容状态跳变。

A hybrid impulsive controller is designed , under which the closed-loop system can be admissible as well as eliminating or minimizing the inconsistent state jumps as soon as possible .

基于FPGA实现步进电机脉冲信号控制器设计

The design of impulse signal controller in stepper motor based on FPGA

美国硅通用半导体公司设计的适用于高频功率MOS管驱动的第二代集成电路脉冲宽度控制器SG3525，用于驱动N沟道的功率MOS管。

The second generation integrated circuit pulse width modulator SG3525 , which is designed by SG , can be used to drive the N-channel MOS power tube .

基于这一理论开发出以电机控制专用的数字信号处理器芯片TMS320LF2407为核心的三相混合式步进电机脉冲细分控制器。

A three-phase hybrid stepping motor pulse subdivision controller based on TMS320LF2407 DSP is designed based on this theory .

并且研制开发了脉冲电流控制器。

And a pulse controller is developed for DC automatic SAW .

所研制开发的脉冲电流控制器操作简便、运行可靠、满足工作要求。

And the developed pulse controller could meet the needs of work .

文丘里脉冲水位控制器的应用

Application of Venturi - tube Pulse Water Level Controller

智能脉冲电网控制器的研制

Development of the intelligent pulse electric wire netting controller

直流电焊机双丝脉冲协调控制器的研制及应用

Research and Application of the Tandem Pulsed Coordination Controller on DC Welding Power Source

大功率特种脉冲电源控制器研究

Special Pulse Power Supply

对弹上脉冲矢量控制器在弹上的空间分布及其控制力和控制力矩的模型进行了细化。

The model of impulse vector controllers arrangement on the missile body and the model of the force and the moment produced by the impulse vector controllers are established .

谱仪主要由中央控制单元及各个控制器组成，分别为网络接口控制器、射频发射控制器、射频接收控制器、梯度发生器以及脉冲序列控制器。

The spectrometer is mainly constituted by the central control unit and other controllers , which are network interface controller , RF transmitter controller , RF receiver controller , gradient generator and pulse sequence controller .

能量模拟系统中，利用脉冲强度控制器和窄脉冲发生器实现了回波脉冲强度和产生时间的精确控制，配合高精度连续可调衰减装置可准确地实现回波能量大小和分布的仿真。

In the energy imitation , making use of the pulse strength controller and narrow pulse pump to carried out the precision control of a pulse strength and the creation time , matching with the high accuracy continuous and adjustable attenuating plate accurately realized the energy magnitude and distribute .

电磁脉冲对微控制器干扰特性的实验研究

Experimental Studies on Interference Characteristics of Microcontroller under EMP

该控制器包括三种输出控制形式，并且可以采用数码管监视脉冲参数和控制器的运行状态。

This controller comprises three output control forms , also adopts digital tube supervising pulse parameter and controller working condition .

本文还论述了在胶片扫描系统中由温度传感器、半导体致冷器、可编程PWM脉冲发生器、风扇控制器、散热片和风扇等组成的温度控制系统的原理及实现方法。

So this paper also introduces the theory and design method of temperature control system composed of the temperature sensor , the semiconductor cooler , the programmable PWM impulse generator , fan controller , the radiator and the fan .

针对一非最小相位对象，在内模控制结构下，根据预测控制机理来直接优化设计一非因果FIR（有限脉冲响应）型控制器，提出了基于奇异值分解（SVD）的控制器系数估计算法。

Under the internal model control structure , a SVD - based algorithm is proposed to estimate the coefficients of a non - causal FIR - typed controller for the non - minimum phase plants according to the predictive control strategy .

本文介绍了脉冲比较型位置控制器的工作原理及其输入一输出特性。

This paper introduces the work principle and input-output characteristic of pulsecomparing mode position controller .

求解这个优化问题能够得到较小的保成本函数上界和状态跳变及一个次优的保成本状态反馈控制器。对一类脉冲切换广义系统，提出了脉冲控制器和反馈控制器设计的一个新算法。

A lower guaranteed cost function upper bound and jumps and a suboptimal guaranteed cost state feedback controller are obtained by solving the optimization problem . A new algorithm is presented to design an impulsive controller and a feedback controller for a class of impulsive switched singular systems .