纤维强化

  • 网络fiber-reinforced;fibre-reinforced
纤维强化纤维强化
  1. 纤维强化树脂粘接桥在前牙种植过渡修复中的应用

    The Application of Fiber-reinforced Resin Bonded Bridge in Anterior Teeth Transitional Repair after Implant

  2. 文章从流体静力学和动力学两个方面讨论了浸渗法制造纤维强化金属基复合材料所需的压力,并给出了计算公式。

    This paper deals with the necessary pressure for casting fiber-reinforced metal-matrix-composites from two aspects of hydrostatics and hydrodynamics and the formulae of compute are given .

  3. CO2激光适用于芳香族聚醯胺短纤维强化FRP板的孔加工。

    CO_2 laser drilling can be applied to produce the holes of aramid short fiber reinforced FRP plate .

  4. 碳化硅纤维强化7740硼硅玻璃和LAS玻璃陶瓷复合材料显微结构和热暴露后界面特征

    The microstructure and heat-exposed interface characteristics of SiC fibre reinforced 7740 borosilicate glass and Las glass-ceramics

  5. 纤维强化对Cu-Fe合金的强化作用

    The effect of fiber reinforced composite in alloy Cu-Fe

  6. 采用硬质合金刀具研究了挤压铸造Al2O3短纤维强化ZA22合金复合材料的切削加工表面质量。

    The cutting surface quality of the squeeze casting ZA22 / Al 2O 3 composites was researched with a hard metal alloy cutter .

  7. 为了改善以前的状况,人们改造了许多船只,并用带有舷外发动机的纤维强化塑料(FRP)船只取代了许多木筏或乡村小船。

    In an effort to improve on the past , boats have been upgraded and many wooden catamarans or country boats have been replaced with fiber-reinforced-plastic ( FRP ) craft with outboard motors .

  8. 介绍了氮化硅陶瓷以及碳纤维强化树脂在涡轮增压器上的应用,并且叙述了陶瓷材料的成形技术、烧结技术、与金属的结合技术以及新开发的碳纤维强化树脂PKU的特性等。

    The application of silicon-nitride ceramic and carbon fibre reinforced resin to turbo-charger is introduced . The forming technology , sintering technology and binding metal technology of ceramic materials and the characteristics of new developed carbon reinforced resin PKU , etc. are described .

  9. 2009年食品功能化新潮流&膳食纤维强化食品的市场机遇

    New trend of functional foods in 2009 & Opportunities of high-fiber foods

  10. 前牙玻璃纤维强化复合树脂粘结桥的强度

    Mechanical properties of anterior glass fiber reinforced composite resin-bonded-fixed-partial dentures

  11. 水溶性食物纤维强化柑桔汁饮料的开发研究&再论中国产HB801吸附树脂对柑桔苦味物质的脱除效果

    Studies on the Development of Enriched Citrus Juice Drink with Water-soluble Dietary Fiber

  12. 液压用纤维强化橡胶软管

    Textile reinforced rubber hoses for hydraulic use

  13. 结论应用强力纤维强化树脂夹板固定下颌前牙可获得较满意的临床效果。

    Conclusion The ribbon reinforced resin splint was satisfactory in splinting the mobile mandibular anterior teeth .

  14. 讨论了纤维强化金属基复合材料的主要组成部分&作为增强剂的纤维,以及复合材料的制造工艺,并列举了若干典型碳纤维增强金属基复合材料的应用实例。

    This paper also described development and application of some carbon fiber reinforced metal matrix composites .

  15. 玻璃纤维强化塑料砂浆管

    Fiberglass reinforced plastic mortar pipes

  16. 钢筋混凝土纤维强化塑料复合梁的弯曲失效线弹性断裂力学模型

    Linear elastic fracture mechanics model of bending failure of composite reinforced concrete beam with fiber reinforced plastic

  17. 并简单介绍了几种新的陶瓷材料,如陶瓷复合材料、涂层材科和纤维强化材料等。

    Finally , several new ceramic composite materials have been briefly introduced , such as ceramic-metal composite materials , coating materials , fibre strengthening materials , erc .

  18. 适合于低合金钢、合金钢、合金、氏体不锈钢、热合金、璃纤维强化塑料等。

    Suitable for a wide range of low and high alloy steels , titanium alloys , austenitic stainless steels , heat resistant alloys , fibre glass reinforced plastics etc.

  19. 就本质而言,热塑性塑料的机械性能低于金属,但可以通过加入玻璃纤维强化予以增强来适应某些运用。

    The mechanical properties of thermoplastics , while substantially lower than those of metals , can be enhanced for some applications through the addition of glass fiber reinforcement .

  20. 未来最需要利用的就是这种技术,外表披上一层亚光的清新外衣,这让碳化纤维强化塑料的结构和质地显而易见。

    To further emphasize the use of this technology , the exterior is finished in a matt-shimmer clear coat , that lets the CFRP structure and its texture completely visible .

  21. 综述了当前国内外在树脂基复合材料、金属基复合材料、陶瓷基复合材料及纤维强化水泥等方面的最新研究、应用及发展情况。

    The paper makes a comprehensive statement of the latest research of the resin based composite material , metal based composite material , ceramic based composite and fibro reinforced cement at home and abroad today , including their application and development situation .

  22. 陶瓷颗粒Ti3SiC2-碳纤维弥散强化铜基复合材料组织和性能研究

    Microstructure and Properties of Ti_3SiC_2 / Carbon Fibre Dispersion-strengthening / Cu-graphite Composites

  23. Ag含量对纤维相强化Cu-Ag合金组织及性能的影响

    Effects of Ag content on Microstructure and properties of the filament strengthened Cu-Ag Alloys

  24. 玻璃纤维布强化杨木胶合板模板研究

    A Study on Glass-fiber Cloth Reinforced Poplar Plywood for Concrete Forms

  25. 纤维相强化Cu-12%Ag合金的组织和力学性能

    Microstructure and mechanical properties of Cu-12 % Ag filamentary composite

  26. 高膳食纤维营养强化大米的制备研究

    Preparation of Nutritional Rice Fortified with Dietary Fiber

  27. 采用浸胶玻璃纤维布强化方法制造杨木胶合板模板。

    Poplar ( Populus deltoides ) veneers were used to make plywood for concrete forms .

  28. 介绍高发射率涂料对耐火纤维的强化作用。

    The strengthening effect of high emissivity coating on refractory fibre is described in this paper .

  29. 玻璃(或玻璃纤维)强化塑料构件的供应及装置〔公共工程类别〕

    Supply and installation of glass ( or fibre ) reinforced plastic units [ public works category ]

  30. 在美国尼伯科较高压力的碳钢和合金球阀产品中,采用短束玻璃纤维作为强化材料。

    NIBCO uses short strand fiberglass as a reinforcement for our higher pressure carbon steel and alloy ball valve products .