硅传感器

辅助电极型硅传感器的热力学分析与实验

Thermodynamic analysis and experiment of auxiliary electrode silicon sensor

辅助电极型硅传感器的研究进展

Researching progress on auxiliary electrode silicon sensor

可对多目标测量的硅传感器系统

The Silicon Pressure Sensor System Measured Multi - Object

硅传感器测定碳饱和铁液中硅活度的研究

Study on Measurement of Silicon Activity Using Silicon Sensor in Carbon Saturated Iron Melt

新开发的汽车硅传感器

Newly Developed Silicon Transducer for Automobile

多孔硅传感器的研究进展

Progress in Porous Silicon Sensors

压阻式力敏硅传感器的结构剖析

Analysis of Silicon Piezoresistive Sensor

硅传感器的发展趋势

Trends of Silicon Sensors

随着集成电路和微机械加工技术的迅速发展，微硅传感器的研究和应用得到了极大的促进。

With the rapid development of integrated circuit and MEMS technology , The research and application of the micro-Si sensor are greatly accelerated .

介绍智能变送器控制板的硬件和软件设计，并给出了扩散硅传感器温度补偿的计算公式和程序框图。

The design of software and hardware of the control board of intelligent transmitter is introduced . Computed formula and programming frame about temperature compensation of spreading silicon sensor are described .

双E形结构硅压力传感器的研制

Development of dual - E form pressure transducer

X型横向压阻式硅压力传感器

X-Cross Piezo-Resistance Type Silicon Pressure Transducer

双E型硅加速度传感器的研制

Development of Dual-E form Accelerometer

OEM硅压力传感器温度补偿技术研究

Study on Temperature Compensation Technique of OEM Si-Pressure Sensor

介绍在IBM及其兼容系列微型机上，实现硅压力传感器版图CAD软件的设计方法。

The paper describes that a silicon pressure sensor with plate graph CAD software design is carried out on IBM and its series of compatible microcomputers .

介绍了一种基于CMOS，能同时测量风速风向的硅集成传感器。

A kind of wind sensor based on CMOS process that can simultaneously measure both the wind velocity and direction is presented .

基于MEMS技术制作的硅脉象传感器的制作工艺与集成电路工艺相兼容，有广泛的应用前景。

The process of silicon pulse sensor based on MEMS technology is compatible with IC process , which has expensive application prospect .

简单介绍了SiliconDesign公司开发的非硅MEMS传感器的设计、工艺、输出信号的处理技术。

In this paper , the design , fabrication and the treatment technology of the output signal of a non-silicon MEMS accelerometer based on micro electroplating from Silicon Design Inc are introduced .

扩散硅压力传感器工艺过程的FMECA分析

FMECA Analysis of the Technology Process of Diffusion Silicon Pressure Transducer

基于绝缘体硅的传感器的版图和工艺设计都是按照中国电子科技集团13所的MEMS线的工艺规范进行的。

Layout design and process design based on SOI processes are made according to the Specification of the MEMS line in China electronics technology group the 13th research institute .

然后，探讨了压阻型扩散硅压力传感器的温漂及补偿方法，设计了一种基于USB接口传递的数字压力传感器实现温漂的数字补偿。

The results confirm the scheme is correct . Then , the temperature drift and the signal compensation of Si-piezoresistive pressure sensors are discussed , and a digital pressure sensor based on USB port is developed .

采用扩散硅压力传感器、微功耗A/D、微功耗LCD显示器、微功耗MCU及数字校准等技术，设计了新型就地指示压力表。

Adopted diffused silicon pressure sensor , micro-power-consumption A / D , micro-power-consumption LCD , micro-power-consumption MCU and numeric adjustment technology etc , a new type indicating manometer on the spot has been designed successfully .

通过将扩散硅压力传感器的每一道工序作为“部件或元件”，构成“工艺”的可靠性框图，进行FMECA分析；

Every technology process of diffusion silicon pressure transducer as " parts and elements " the reliability farm-figure of the technology process is composed , and the FMECA analysis is proceeded .

SG-75扩散硅压力传感器

SG-75 Type Silicon Pressure Sensors

本文介绍了工业压力变送器用全固态结构的SG-75扩散硅压力传感器的研制。

This paper presents the SG-75 Type solid state silicon pressure sensors applied in industrial pressure transmitters .

该方法无需事先已知微硅加速度传感器的动态特性，可根据传感器以及参考模型对输入激励响应的实测数据，通过PSO算法的优化学习得到补偿器的参数。

With this method a dynamic compensator can be realized without knowing the dynamic characteristics of the sensor , the parameter of the compensator is optimized using PSO algorithm according to the measurement data of the step response of the sensor and the reference model .

文中详细介绍数字硅温度传感器TC77的功能，特点，以及在测控系统中与PIC单片机的接口应用。

The function and features of the digital silicon temperature sensor TC77 are introduced in this paper in details and how to develop TC77 interfacing with PIC Micro controller in telemetry system .

这里介绍的方案是通过数-模组合硬件电路实现分段补偿，具体方案是基于目前国内外OEM硅压力传感器厂商采用的固定电阻器并联补偿法。

The scheme whose subsection compensation is realized by D / A assembled hardware circuit is introduced . Detailed project is based on the method of fixed resistance 's parallel compensation which is adopted by manufacturers of OEM silicon pressure sensor at home and abroad .

本文讨论硅霍尔传感器制造厂的可靠性目标管理方法的一般理论、提出了PDCA循环在传感器制造厂可靠性管理中的应用及硅霍尔传感器生产过程中的可靠性保证体系的建议。

In this paper the method and theory of reliability goal management in manufacture factory of silicon Hall Sensor are discussed . The PDCA Cycle using for reliability growth , and management of SMS . the reliability ensuring system in SHS manufacture factory are introduced .

压阻式传感器是近年来发展应用很广的一种压力传感器，本文介绍了美国摩托罗拉公司（MotorolaCo.）生产的MPX横向扩散型硅压力传感器的主要特性。

Piezo-resistance type of sensor is the pressure transducer which has been developed and used in recent years . In this paper it is introduced that the main specifications of the Model MPX transversal diffusion silicon pressure transducer are presented , which is manufactured by American Motorola Co.