首页 / 词典 / good

相切

xiāng qiē
  • tangency;contact;touch;contiguity
相切相切
相切[xiāng qiē]
  1. 相切组网SDH子网接入点失效的应急方案

    Emergency Solution to the Equipment Failure of Subnet Access Node in Tangency SDH Loop

  2. 圆弧连接的本质就是使圆弧与直线或圆弧与圆弧相切,在此研究了基于AutoCAD二次开发的圆弧连接程序化绘制方法,用VISUALLISP语言编程建立了圆弧连接通用绘图程序。

    The essence of arc joining is making the tangency of the arc and line or the arc and arc . The programmed Drawing method of arc joining based on AutoCAD secondary-development is studied in this article . The Visual LISP drawing program of arc joining is merited .

  3. 这两个弧相切。

    These two curves are tangent .

  4. 实际上,△r完全不与任何一点相切。

    Actually , delta r is not strictly tangent to anything .

  5. 这里向量变为与曲线相切,那n上的分量就是0了。

    And here maybe the field is tangent so the normal component becomes zero .

  6. 其中的π1圆与腔的R1镜的σ1圆相切;

    One of the circles π 1 is tangent to the circle σ 1 of the mirror R1 of the cavity ;

  7. 原因就是,我们只在意这些向量的方向是与g相切。

    And the reason for that is that we care actually only about these specific directions that are tangent to variable of g.

  8. 只是沿着曲线流动,所以通量为零,F与C相切。

    They are just flowing along the circle around and around so the flux will be zero . F now is tangent to C.

  9. 讨论与给定切线多边形相切的分段三次Bézier曲线,所构造的曲线是C2连续的闭曲线,且对切线多边形保形。

    A method is presented for constructing piecewise quadratic rational B é zier curve with given tangent polygon .

  10. 异向旋转相切型(CRT)双螺杆挤出机组在废旧塑料回收再生中的应用

    The Application of Count-Rotating Tangential ( CRT ) Twin Screw Extruder System in Post-consumer Plastics Recycling

  11. 具有与两坐标轴均相切的双曲线解的Kolmogorov三次系统E3~2轨线的拓扑分类

    Topological classification of the trajectories of Kolmogorov cubic system e_3  ̄ 2 with hyperbolic solution which contact both axes

  12. 水平管内单相切向旋流流动特性的LDV实验研究

    LDV measurements of single-phase swirling flow in a horizontal pipe

  13. 也就是说,任何向量u,任何与g的水平集相切的单位向量,应该要与f的梯度垂直。

    And so that means that any vector u , any unit vector tangent to the level set of g is going to be perpendicular to the gradient of f.

  14. 所以这个与g=c相切的导数,应该是f的方向导数,在这个方向下,应该是等于0的。

    So the derivative in any direction , tangent to g equals c , should be the directional derivative of f , in any such direction , should be zero .

  15. 这是一个向量场,其中旋转轨道是,以z轴为圆心的圆周,并且这个向量场与每个圆相切。

    That is a vector field in which the trajectories are going to be circles centered in the z-axis and our vector field is just going to be tangent to each of these circles .

  16. 或者你在行星表面上,也就是与xy平面相切。

    Or , if you 're at the surface of it , then of course you just put it tangent to the xy plane here .

  17. 与Coulomb准则内接和相切时,反映最小主应力的作用偏小而中间主应力作用偏大。

    The effect is too lower of minimum principal stress in D. P criterions inner or tangent joining with Coulomb criterion , and too higher of medium principal stress .

  18. 本文论述了与给定切线多边形相切的有理二次Bézier曲线,构造曲线是曲率连续的,具有局部可调性,且对切线多边形是保形的;

    This paper proposes an approach of constructing rational quadratic B é zier curves with all edges tangent to a given control polygon . The curve is joined by piecewise as G ~ 2-continuity and shape-preserving to the tangent polygon .

  19. 应用了小应变弹性悬链线单元、CR列式法梁单元,精确方便地模拟了鞍座及鞍座与主缆相切点的运动,通过迭代方法得到架设参数。

    By employing the small strain elastic catenary element and beam element based on CR formulation , the contacts and movements between saddles and main cables are modeled accurately and easily . The erection - pa rameters are obtained by the iteration method .

  20. 提出了构造与多边形各边都相切的平面分段4阶HBézier-like曲线的简便算法。

    A simple algorithm of constructing planar piecewise 4-order HB é zier-like curves with all edges tangent to given control polygons is described .

  21. 指出:JR曲线稳定性评定图法是根据推动力曲线与阻力曲线的相切条件确定失效点的,理论清晰,可以作为各种评估方法的理论依据。

    It is point to that J_R curve stability assessment diagram method is based on the tendency condition between driven and resistance curves to determine the instability point , so may be considered to be theoretical basis of all assessment methods .

  22. 相切双导体球的电容

    The self capacity coefficient of a pair of contact spherical conductors

  23. 具有两个相切圆解的三次系统的极限环

    Limit Cycles of a Cubic System with Two Tangent Circle Solutions

  24. 弧向相切圆族的计算

    Computation for the Family of Arcwise Tangent Disks Reflection about Round objects

  25. R~2上的奇次相切环及其应用

    The transversally tangent ring in R 2 and Its Applications

  26. α角将,与该点相切。

    The angle of alpha will then be tangential to this point .

  27. 文章论述了与给定切线多边形相切的三次代数曲线;

    This paper discusses cubic algebraic curves with the given tangent polygon .

  28. 翻译学与比较文学:两个相切相重的学科

    Translation Studies and Comparative Literature , Two Closely Related Disciplines

  29. 同宿相切点邻域的一级相变

    The First Order Phase Transition of the Neighborhood of Homoclinic Tangency Point

  30. 具有相切面的曲面立体线画图标记研究

    Labeling for Line Drawing of Object with Tangent Curve Surface