电弧炉

运用dq矢量变换法，检测冲击性电弧炉负荷的瞬时无功电流；

It detects the instantaneous reactive current of EAF for shock load by using dq vector transform method .

150t超高功率电弧炉生产高质量钢的工艺技术

Process Technology for Refining High Quality Steel by 150t Super High Power EAF

直流（DC）电弧炉技术的发展动态

Advance in Direct Current ( DC ) Arc Furnace

电弧炉ALARC-PC~（TM）二次燃烧技术

ALARC - PC ~ ( TM ) Post - Combustion Technology for EAF

中国电弧炉CSP流程高效化的发展

Development on High Efficiency of EAF-CSP Route in China

采用真空电弧炉熔炼及吸铸方法制备TiZrCo/Fe三元准晶合金系样品，对吸铸前后样品中存在的相进行了比较。

The ternary alloys Ti Zr Co / Fe is prepared by vaccum arc smelting and suction casting .

PLC在60t电弧炉上的应用

Application of PLC to 60 t electric arc furnace

阐述将改进的BP神经网络用于直流电弧炉水冷炉壁问题曲线的辨识。

BP neural network is improved and applied to the identification of the water-cooling furnace walls curves of the Direct Current Electrical Arc Furnace ( DC EAF ) .

兑铁水条件下UHP电弧炉脱碳数学模型

A Mathematical Model of Decarburization in UHP Electric Arc Furnace with Hot Metal Charged

SVC的首次应用是在1973年用于电弧炉电压闪变控制。业大负荷问题。

The first application of an SVC to provide flicker control for an arc furnace was in 1973 .

炼锡电弧炉计算机控制系统设计包括硬件设计和软件设计，本文主要介绍软件总体设计及其主要PID控制算法的设计。

The system of computer controling rac furnace for smelting tin contains hardware and software , this article introduces the software in total design and its main PID algorithm .

10t直流电弧炉炉底电极的设计与实践

Designing of Bottom Electrode of 10t DC Arc Furnace and Practice

TCT型静补装置在电弧炉炼钢生产中的应用

Application of TCT Static Compensation Device in Steel Smelting Production of Electric Arc Furnaces

降低10t电弧炉电耗工艺措施

Process measures for reduction on electric consumption of 10-T electric arc furnace

100t交流竖式电弧炉冶炼电耗技术分析

Analysis of power consumption on 100 t AC shaft electric arc furnace

等离子电弧炉回收Ni-Al合金细粉工艺的研究

Technological Process of Ni & Al Alloy Fines Recovery with Plasma Arc Furnace

和钢20T电弧炉过程控制滞后分析及处理

20T Electric Arc Furnace and Steel Process Control Analysis and Processing Lag

提高20t电弧炉炉衬寿命工艺实践

Process Practice of Enhancing Lining Service Life of 20t EAF

某3t电弧炉引起的电压波动、闪变及其抑制

The voltage fluctuation , flicker and their suppression on a 3t arc furnace

用Matlab实现了电弧炉模型的仿真，结果表明，提出的模型适合于研究电弧炉供电系统的电压波动。

Realizes the simulation of arc furnace with Matlab , and the result indicates that the model put forward is suitable for voltage fluctuates research in the electric power system of arc furnace .

30t直流电弧炉装备与工艺研究

Research on equipment and technology of 30t DC EAF

EBT技术在30t电弧炉上的应用

Application of EBT Technology in 30t EAF

熔炼AZS材料的电弧炉炉底料的研究

A Study on the Residual Block of Electric Arc Melting Furnace for AZS Refractories

中钢50t电弧炉炼钢生产实践分析

Analysis on Steelmaking Production Practice in 50 t EAF

60t电弧炉计算机监控系统

The computer monitoring system for a 60 ? t EAF

采用真空非自耗电弧炉制备了不同Al质量分数的Ti&Si共晶合金，研究了合金在800℃下的恒温氧化行为。

Ti-Si eutectic alloys with various Al content was fabricated through a vacuum nonconsumable arc melting method . The influence of Al content on the isothermal oxidation behavior of Ti-Si eutectic alloys at 800 ℃ in air was investigated .

本文主要研究了两大方面的问题，一个是电弧炉对电网谐波的影响，另一个是采用matlab编写仿真软件，用以分析电弧炉对电网谐波所带来的影响与危害。

This paper mainly studies two problems : the first : analyzes the harmonics impaction in power-grids caused by electric arc furnace ( EAF ) . The second : develops a simulation software using Matlab to analyze this impaction .

目前在攀长钢，不合理的LF精炼工艺已经成为制约电弧炉LF炉（VD/VOD炉）连铸或模铸高效炼钢的瓶颈。

Nowadays in Changcheng Steelworks , the unreasonable LF process has become the bottleneck for high speed steelmaking of EAF-LF - ( VD / VOD ) - CC / ingot casting .

北方重工50tEBT超高功率电弧炉无富氧泡沫渣工艺

No-Rich-Oxygen Foam Slag Operating Procedure for a 50 t EBT UHP Arc Furnace at North Heavy Industry Group

电弧炉正常工作时产生大量高次谐波，APF即利用可控的功率半导体器件向电网注入与谐波源电流幅值相等、相位相反的电流，使电源的总谐波电流为零，达到实时补偿谐波电流的目的。

A large number of EAF generated high-order harmonic , APF inject to grid with amplitude equal and the opposite phase current harmonic the power with controllable power semiconductor devices .