电子枪

用这3种方法分别计算了二次发射微波电子枪的外部Q值并和实验测量结果做了比较。

The three methods mentioned above were used to calculate the external Q of secondary emission microwave electron gun .

投影CRT用磁聚焦电子枪

Magnetic Focusing Electron Gun Used in Projection CRT

彩色显像管用电子枪G1膜孔品质问题探讨

G_1s vent Quality Problem Probing of the Electronic Gun for CPTs

微束斑X射线源LaB6阴极电子枪的设计

Design of LaB_6 cathode gun in the X-ray source with microbeam

X波段盘圈加速结构热阴极微波电子枪的研究

Research of Multi-Cell Thermionic RF Gun Injector Based on X-band DAW Accelerating Structure

基于PLC的电子枪烧氢炉控制系统

Control of the Hydrogen Burning Furnace Based on PLC

回旋管电子枪CAD

Electron gun CAD of Gyrotron

离子源辅助电子枪蒸发制备Ge（1-x）Cx薄膜

Preparation of Ge_ ( 1-x ) C_x Thin Film by e-gun Evaporation Assisted with Ion Source

汤姆逊硬X射线源中，光阴极微波电子枪要求触发激光脉冲与腔中微波场相位的精确时间同步。

The photocathode RF gun requests accurate synchronization between laser pulse and RF phase in Thomson scattering X-ray source facility .

HC系列电子枪有着最长的使用寿命。

HC e-Guns are designed to provide maximum service life .

电子枪束流形成及特性的PIC模拟计算与分析

Modeling and Analysis of Electron Beam Formation and Characteristics by PIC Method

Pierce型六硼化镧阴极脉冲电子枪

Pierce - type pulse electron gun with a plane lab_6 cathode

二次谐波回旋行波管Cusp电子枪的模拟与实验研究

Simulation and experiment on Cusp gun for second harmonic Gyro-TWT

Cusp电子枪粒子回旋运动的计算与实验

Simulation and Experiment of Axis-encircling electrons in Cusp Electronic Gun

HC系列电子枪蒸发源在所需的涂层生产应用中有着优异的表现。

The HC series e-Gun evaporation sources deliver superior results in demanding production coating applications .

CPT电子枪零件清洗新工艺的开发与应用

Development and application of a new cleaning process for CPT electron gun parts

等离子体辅助电子枪蒸发制备AlN薄膜及等离子体参数诊断

Prepared AlN Thin Films by plasma assisted electron beam evaporation and the diagnosis of plasma parameters

对影响EBCT电子枪使用寿命因素的探讨

Discusses on Factors Influencing the Service Life of E-Gun of EBCT

采用动态聚焦电子枪是提高CRT全屏分辨率的有效手段。

Dynamic-focus electron gun is used as a main means to improve the all-screen - resolution of CRT .

用MAFIA进行微波管电子枪三维模拟研究

PIC Simulation of Microwave tubes Electron Gun using MAFIA

为使电子枪形成的电子束偏转180°或270°来加热金属，又进行了线圈磁场的理论计算，并采用等B磁铁设计，产生满足要求的均匀磁场。

In order to deflect the electron beam about 180 ° or 270 ° to heat metal , magnetic field was calculated and the magnet iron was designed to generate the adequate uniform magnetic field .

用于DC-SC光阴极微波电子枪中的Cs2Te光阴极研制

Research and Fabrication of the Photocathode Used in DC-SC Photocathode RF Electron Gun

用WIP电子枪的小型高重复频率电子束加速器

A compact high repetition rate elec - Tron beam accelerator with WIP electron gun

BEPC实验电子枪系统的研究

Study on BEPC Experimental Electron Gun System

超薄CRT中zero-DAF电子枪的设计

Designing the zero-DAF Electron Gun for Super Slim CRT

分析了Ka波段二次谐波回旋行波管双磁会切电子枪的理论模型，计算了电子枪的设计参数；

Theoretical model of a double-cusp gun for Ka-band second harmonic gyro-TWT amplifier was analyzed , and the electron beam performance parameters were calculated .

本文叙述了采用三种不同形状栅网（方孔栅、六角孔栅、环形栅）的导流系数为1.4μp的无截获栅栅控电子枪，在电子注分析器上进行实验的详细情况。

A non-intercepting gridded gun with the perveance of 1.4 μ p is described . Three different grid-mesh shapes ( square , hexagonal and annular ) are chosen , and the experimental results in an electron beam analyzer are given in detail .

因为影响EBCT电子枪寿命的因素种类繁多且复杂，我们总结出一系列完整的方案，以延长EBCT电子枪的使用寿命。

Analyzes the factors influencing the service life , which is variable and complex , and summarizes a series of complete schemes to prolong the service life of e-gun of EBCT .

计算强流电子枪的SLAC预处理程序

Electron Gun Structural Preprocessor for SLAC Program

根据8mm三次谐波回旋管对电子枪的要求，采用综合法和分析法设计了该双阳极磁控注入电子枪。

The triode electron gun is designed and calculated according to the requirements for 8mm third harmonic gyrotrons by this method , which combines synthesis with analysis .