燃气轮机运行

同时通过对模糊自适应控制的原理和燃气轮机运行过程的分析，并结合专家经验得出燃气轮机模糊PI控制规律，设计出了透平转速和燃气轮机排气温度的模糊自适应PI控制器。

At the same time , an analysis of self_adaptive fuzzy control mechanism and gas turbine running procedure were provided , and new fuzzy control rules were proposed based on expertise . Self_adaptive fuzzy proportional integral speed and temperature controllers for heavy_duty gas turbine were presented .

金牛座60型燃气轮机运行中常见的故障及处理方法

Failure and its treatment methods for Taurus 60 GT in operation

工业用燃气轮机运行和检修

The brief summary of industrial gas turbine running and overhauling

低热值燃料对微型燃气轮机运行特性的影响

Influence of Low-heating-value Fuels on the Operating Characteristics of a Miniature Gas Turbine

该方法能够规避大气温度，功率因素的影响，只反映燃气轮机运行性能的变化；

It can eliminate the influence of atmospheric temperatures and power factors and only reflect the change in gas turbine operating performance .

分析使用不同燃料对燃气轮机运行经济性和运行管理的影响，从完善系统、可持续发展的角度出发，提出增设配套天然气增压装置，并在实施后取得相应的成绩和经验教训。

To analyze the affection of the gas-turbine operational economy and management in different fuels , improve the system , develop for long time , we advise to add gas-pressed equipment and attain the performance , experience , lessons .

6B联合循环电厂的燃气轮机小岛运行方案

House load operation scheme of combustion turbine in 6B type combined cycle power plant

9E燃气轮机调峰运行方式对转子寿命和维修周期的影响

Influence of Peaking Operation Mode on Rotor Life and Maintenance Cycle of 9E Gas Turbine

工业燃气轮机机组运行维护总结

Sum Up of Operation and Maintenance of Industrial Gas Turbine Unit

空压机&燃气轮机机组运行维护

Operation and Maintenance of Air Compressor - Gas Turbine Set

所得结果，对地面燃气轮机的运行和改烧劣质燃油的陆用航机有重要参考价值。

The results are useful for operation of stationary gas turbine and for aero-derivative gas turbine using low quality fuel .

介绍了金牛座60型燃气轮机在运行中常见的几种故障，对故障原因进行了分析，并提出相应的解决办法。

This paper introduces several common failures of Taurus-60 GT inoperating process , analyses the reason , and puts innovative methods .

燃气轮机的运行涉及到加减速过程，燃气轮机的加减速过程是一个非常复杂的气动热力学过程，需要压气机、燃烧室和涡轮协同工作。

The gas turbine operation involves the process of acceleration and deceleration , which is a very complicated aerodynamic thermodynamic process and requires coordinated work of compressor , combustor and turbine .

指出选择燃气轮机机组的运行方式。

Pointed out that the selected gas turbine unit run .

一段炉与燃气轮机联合系统运行及评价

The Operation and Comments of the Combined System of Primary Reformer and Gas Turbine

燃气轮机的小岛运行是指燃气轮机在与主电网解列的情况下，带厂用电运行，从而保证了电厂的安全运行。

House load operation of gas turbine is described as an operation with station-service power under the condition of disconnection to main power grid , which can make a power plant operate safely .

但是当燃气轮机处于低运行工况时，由于燃气初温较低，因而在加湿量比较大的情况下将导致燃烧效率下降，结果造成燃气轮机的功率降低。

However , when the gas turbine is at a low operating condition , as the gas temperature is low , combustion efficiency will decrease if humidity is too high , resulting in reducing of gas turbine specific work .

提高油田燃气轮机热电联产系统运行效率的研究

Research on The Improvement of Operational Efficiency for Gas Turbine CHP System in Oilfield

不同控制方式对熔融碳酸盐燃料电池/微型燃气轮机混合动力系统运行特性的影响

Effect of Various Control Methods on the Molten Carbonate Fuel Cell / Micro-gas Turbine Hybrid System Performances

结果表明，功率反馈控制技术能较好地实现舰船燃气轮机双机并车运行的控制。

The results show that the power-feedback control technology can fulfill the process of the control technology of the paralleled main twin-GT engine on naval ship .

最后利用支持向量机分类算法，对燃气轮机进行健康监测，对运行数据采取了二分类与多分类的方法，以达到对燃气轮机运行进行预诊断的目的。

Finally , support vector machines for classification , the health monitoring of gas turbine , a health classification of the operating data in order to achieve operation of the gas turbine pre-diagnostic purposes .

通过分析三菱M701F燃气轮机叶片冷却技术的冷却原理和运行方式，为燃气轮机的安全高效运行提供参考。

This essay analyzes the cooling principle and the mode of operation of the M701F gas turbine blade cooling technology to verify its efficiency in enhancing the safety of the gas turbine .

通过燃气轮机循环性能试验，考察了分轴燃气轮机从慢车工况至较高工况的运行状况，得到了分轴燃气轮机稳定运行工况下各部件性能参数。

Through the experiments , the operating conditions of the two-shaft gas turbine from climbing to a higher operating condition are studied and the performance parameters of the various components of the two-shaft gas turbine are acquired on stable operating conditions .