热稳定性

rè wěn dìnɡ xìnɡ
  • thermal stability;thermostability
热稳定性热稳定性
  1. 16种食用菌超氧物歧化酶(SOD)活性、热稳定性及同工酶的研究

    Study on the Activity , Thermostability and Isozymes of Superoxide Dismutase in 16 Species of Edible Fungi

  2. 杂多酸的XPS研究(Ⅲ)&钼钒杂多酸热稳定性的研究

    XPS studies on Heteropolyacids (ⅲ) study on difference in thermostability between molybdic and vanadic heteropolyacids

  3. 分子筛具有吸附性、再生性,热稳定性好。

    Molecular sieve has the advantages of good absorbability , reproducibility and heat stability .

  4. 形变Cu基原位复合材料热稳定性研究

    Investigation of the Thermal Stability of Cu - Based in situ Composites

  5. 液淬工艺和微量元素对非晶态FeBSi合金热稳定性的影响

    Influence of quenching conditions and Micro-addition of Cerium on thermal stability of amorphous Fe-B-Si alloys

  6. 花生种子SOD活性及热稳定性研究

    The activity and thermostability of SOD of peanut seed in eight varieties

  7. 多孔猝冷Ni催化剂的热稳定性研究

    Thermal Stability of Skeletal Rapidly Quenched Ni Catalyst

  8. 工业应用要求酶制剂具有高酶活性、良好的pH稳定性及热稳定性。

    Industrial applications require the enzymes having higher enzyme activity , excellent pH stability and thermal stability .

  9. 并对该酶的pH稳定性、热稳定性、米氏常数等进行了研究。

    The characteristics of the enzyme such as pH stabilization , heat stabilization and Michaelis constant were studied .

  10. PVC五金件专用料的热稳定性研究

    Study on heat stability of special PVC-hardware

  11. 结果表明60PHB/PEN比PEN具有更高的热稳定性。

    The results show that 60PHB / PEN has better thermal stability than PEN .

  12. W阻挡层对Al/TiSi2/Si接触系统热稳定性的影响

    The Effect of Tungsten Barrier Layer on Thermal Stability of Ai / TiSi_2 / Si System

  13. 首先研究了水滑石纳米粒子存在条件下,VC悬浮原位聚合规律,同时对由原位悬浮聚合制备和加工形成的纳米复合材料的形态结构、热稳定性、粘弹特性和力学性能进行了研究。

    The polymerization behavior , structure and properties of composite resins and composite materials were studied .

  14. TiC颗粒增强非晶钛合金基复合材料的热稳定性

    Thermal stability of TiC Particulate Reinforced amorphous Ti alloy-based composite

  15. MC尼龙6/纳米ZnO复合材料热稳定性的原位XRD法研究

    Thermal Stability of MC Nylon 6 / ZnO Nanocomposite Based on Method of in situ XRD

  16. Ni-(Mo)-P/Cu多层交替镀层的制备及其热稳定性

    Preparation and Thermal Stability of Ni ( - Mo ) - P / Cu Alternate Multilayers

  17. 当PVC与CR共混时,PVC热稳定性受CR硫化体系的影响。

    When PVC is blended with CR , thermal stability of PVC is influenced by the vulcanization systems of CR.

  18. TGA分析表明,苯乙烯-丙烯酸丁酯/有机蒙脱土纳米复合材料的热稳定性有所提高。

    TGA results indicate that thermal stability of composites is enhanced .

  19. 纳米晶体SnO2、ZnO的低温热容及热稳定性研究

    Research on low-temperature heat capacity and thermal stabilit of SnO_2 and ZnO nanocrystals

  20. 内蒙古阿拉善双峰驼驼乳IgG的分离纯化及其热稳定性研究

    Studies on the Separation and Purification of IgG in Alaxa Bactrian Camel Milk and Its Heat Stability

  21. PVA/PA-6合金膜材料比纯PVA热稳定性好;

    The PVA / PA-6 alloy material 's thermal stability was much better than pure PVA .

  22. 结果显示,NiMoP/Cu多层膜与NiP/Cu多层膜相比,具有较高的晶化温度、更高的热稳定性。

    Results show that Ni-Mo-P / Cu multilayers have higher crystallization temperature , therefore have better thermostability than Ni-P / Cu multilayers .

  23. 两种不同气源制备的高氢含量aSi(1-x)Cx∶H薄膜的微结构及其热稳定性研究

    Microstructures and Thermal Stability of a-Si_ ( 1-x ) C_x ∶ H Films with High Hydrogen Content Prepared from Two Different Mixtures

  24. 主要研究了高聚合度聚氯乙烯(HPVC)的热稳定性和热分解过程以及光老化对HPVC性能的影响。

    The heat stability , thermal decomposition behavior and the effect of light aging on performance of HPVC were studied .

  25. ASA复合聚合物与其机械共混物具有相同的热稳定性,但具有更好的韧性。

    The ASA composite terpolymer has the same heat-resistance as its mechanical blend , but better toughness .

  26. 合成了含稳态氮氧自由基的光稳定剂,其结构通过ESR、元素分析表征,考察了其热稳定性。

    An light stabilizer containing stable nitroxyl oxides of free radical was synthesized and characterized using ESR and element analysis .

  27. IgY具有良好的热稳定性,对酸碱具有一定的耐受力。

    The IgY was fairly heat-stable and had a certain degree of acid-alkali resistance .

  28. 采用热稳定性试验,以HPLC法测得的人血白蛋白多聚体含量为考察指标,确定人血白蛋白的贮存有效期。

    Throuth the heat stability test , the valid period of human albumin was calculated by determinating the containing of polymers & aggreates with a HPLC method .

  29. 通过元素分析、IR、UV、XRD、TEM、TGDTA、TPR等测试手段对其组成、结构、颗粒大小、热稳定性以及表面性能进行了表征。

    Their general molecular formula were characterized with elemental analysis , IR , UV , XRD , TEM , TG-DTA and TPR techniques .

  30. 钛合金热稳定性研究Ⅱ.过渡族元素在Ti3X相形成中的行为

    ON THE THERMAL STABILITY OF Ti ALLOYS ⅱ . The Behaviour of Transition Elements in Ti_3X-Phase Formation