烧结铝

中低温烧结铝电解用TiB2-碳素复合阴极材料

The TiB_2-carbon composites sintered at moderate low temperature used as wettable cathode for aluminum electrolysis

烧结铝基含油轴承

Aluminum base oil-impregnated sintered bearing

本文详细介绍了真空技术研究所研制的用于烧结铝镍钴磁钢真空烧结炉的性能、结构及真空烧结铝镍钴磁钢的优点及该烧结炉的发展前景。

Abstract In this paper , the performance of vacuum sintering furnace used for Al 、 Ni and Co which is developed by our institute are described in detail . The structure and advantages of the sintering products and the foreground are given .

采用烧结铝电极工艺形成的器件，铝硅接触处半导体表面浓度约为10~（18）个/cm~3，与原始表面浓度无明显关系；

For the devices made from sintered Al electride the semiconducter surface concentration in the contact region between Al and Si is approximately 10 ~ ( 18 ) r / cm ~ 2 which has no distinct relationship with the original surface concentration .

采用单试样递增温度和递增应力方法研究我国水铝石-高岭石型（DK型）烧结高铝矾土材料的蠕变行为。

The creep behaviour of sintered Chinese bauxite refractories ( DK type ) has been studied by raising temperature as well as increasing stress techniques .

结果表明，掺铝La09Ca01CrO3烧结时铝首先熔化，然后与氧发生反应生成Al2O3，后者发生晶型转变后再与La09Ca01CrO3反应生成六铝酸镧。

The results show that Al first melted and then reacted with oxygen to form Al_2O_3.After changes of crystal microstructure , Al_2O_3 reacted with La_ ( 0.9 ) Ca_ ( 0.1 ) CrO_3 , resulting in the formation of lanthanum hexaaluminate .

热烧结锌铝涂层及其复合涂层失效过程的研究

Studies on the Deterioration Process of Sintered Zinc-aluminum Coating and Composite Coating

热压烧结碳化铝钛材料的制备、结构与性能

Fabrication , microstructure and properties of ti_3alc_2 sintered by hot-pressing

空心阴极等离子烧结氮化铝陶瓷

The Hollow Cathode Discharge Plasma Sintering of Aluminium Nitride Ceramic

粉末烧结多孔铝的工艺与性能研究

Study on the Process and Characteristic of Porous Aluminium by Powder Sintering

有机覆膜对热烧结锌铝涂层耐腐蚀性能的影响

Effect of organic top coating on anticorrosion performance of sintered Zn-Al Coating

润湿剂种类对热烧结锌铝涂层性能的影响

Influence of different wetting agents on the properties of sintered Zn-Al coatings

低温烧结氮化铝陶瓷烧结助剂的研究进展

Research progress of low-temperature sintering aids of AlN ceramic

粉末烧结多孔铝及其压缩变形行为的研究

Study on the Process and Deformation Behavior of Porous Aluminium by Powder Sintering

微波烧结偏铝酸锂陶瓷的可行性研究

Feasibility research on microwave sintering of lithium aluminate

脉冲电流烧结氮化铝透明陶瓷

Pulse Electric Current Sintering of AIN Transparent Ceramics

烧结多孔铝合金的孔隙参数分析

Analyze on Pore Parameter of Porous Aluminum Alloy

烧结法铝酸钠粗液低压脱硅过程的研究

Study on desilication process of rough sodium aluminate solution during sintering process under low pressure

工艺参数对粉末烧结多孔铝合金孔隙特性的影响

Influence of the Process Parameters on the Pore Characteristics of Porous Aluminum Alloy by Powder Sintering Method

为提高热烧结锌铝涂层（简称锌铝涂层）的耐蚀性，在涂层表面涂覆一层环氧富铝膜，形成复合涂层。

Composite coating was prepared by adherence of the epoxy Al-rich coating on sintered Zn-Al coating , in order to improve the anticorrosion performance of Zn-Al coating in seawater .

烧结式锌铝涂层（达克罗）处理液的pH调节研究

Study on pH Adjusting of Sintered Zn-Al Coating ( Dacromet ) Solution

烧结工艺对铝电解NiFe2O4-Cu金属陶瓷阳极性能的影响

Effect of Sintering Parameters on Properties of NiFe_2O_4-Cu Cermet Anodes for Aluminum Smelting

在商业化晶体硅太阳电池制造技术中，广泛采用丝网印刷铝浆烧结工艺制作铝背场（BSF）。

Screen-printing ( SP ) aluminum paste and sintering procedure that make BSF are widely used in mass production of crystalline silicon solar cells .

SiC/YAG烧结工艺及铝钇比的研究

Sintering process and Al_2O_3 / Y_2O_3 ratio for SiC / YAG

烧结式锌铝涂层的粘结原理研究

A Research on Binding Mechanism of Sintered Zinc - Aluminum Coating

逆反应烧结制备铝电解槽用氮化硅&碳化硅复合材料

Reverse reaction sintering of si_3n_4 / sic composite materials for aluminium electrobath

真空热压烧结纳米氮化铝陶瓷的研究

Study on nano-sized AlN Ceramics by hot pressed sintering

本文采用电化学测试、全浸试验、半浸试验、盐雾试验和湿热试验研究了烧结式锌铝涂层的耐蚀性能，并与电镀锌和电镀锌军绿钝化层进行对比。

Anticorrosion performance of sintered zinc-aluminum coating ( dacromet ) was studied and compared with zinc electroplate and olive passivated zinc electroplate by means of electrochemical test , whole-dip test , half-dip test , salt-spray test and moisture-heat test .

用悬浮粒子烧结法在钛铝金属间化合物支撑体上制备Ni微滤膜。

A composite MF membrane consisting of a nickel layer on a porous TiAl intermetallic compound substrate was prepared using sedimentation method and dip-coating method .

介绍了以NaCl粒子为造孔剂利用冷压-溶解-真空烧结法制备泡沫铝的新工艺。

A new process of press-dissolution-vacuum sintering for manufacturing aluminum foam was introduced , NaCl particles were used as the pore formation agent .