淬硬钢

cuì yìnɡ ɡānɡ
  • hardened steel
淬硬钢淬硬钢
  1. 研究了新型陶瓷工具LD-1端铣淬硬钢时的抗破损性能。

    The fracture resistance of an advanced ceramic tool LD-1 when face milling hardened steel has been studied experimentally .

  2. 使用高速切削(HSC)淬硬钢的方法相比传统加工方法不仅可以获得更高的效率、而且可以得到更好的表面质量和更低的加工费用。

    Compared with the traditional processing methods , high-speed cutting cutting ( HSC ) method hardened steel shows a higher efficiency , better finished surface and lower processing costs .

  3. 淬硬钢具有高强度和高硬度(HRC55)等特性,在工业领域应用非常广泛。

    Hardened steel has been widely used in industry due to its high strength and high hardness ( HRC55 ) .

  4. 结合生产,对S-136淬硬钢高速铣削工艺的刀具选择、冷却方式、进给路线进行了分析。

    Choice of cutting tool , cooling manner and feed path in high speed milling S-136 hardened stainless tool steel were analyzed , based on a S-136 die production .

  5. 用陶瓷结合剂CBN砂轮对45淬硬钢工件进行磨削试验,对磨削过程中CBN砂轮的磨损和磨削比进行了研究,发现了陶瓷结合剂CBN砂轮的磨损特征。

    Grinding experiments on 45 hardened steel workpiece were carried out with CBN ( cubic boron nitride ) wheel of vitrified bond . The wear characteristic and grinding ratio of CBN wheel have been studied by experiments . The wear characteristic of CBN wheel has been observed from the experiments .

  6. 导杆:(两个选择)淬硬钢的硬度60-65钢筋混凝土,使用寿命长,硬化不锈钢钢筋混凝土50-55硬度,耐腐蚀精密研磨和抛光15u有效值顺利循环,低分离。

    Guide Rods : ( Two Choices ) Hardened Steel hardness Rc60-65 , long life Hardened Stainless Steel hardness Rc50-55 , corrosion resistant precision ground & polished15u RMS smooth cycling , low breakaway .

  7. 结果表明,在切削正火态45钢、灰铸铁、淬硬钢利不锈钢时,与YT15硬质合金刀具和YG8刀具相比,纳米改性金属陶瓷刀具寿命明显较高。

    Results show that in machining normalized medium carbon steel , gray cast iron , quenched steel and stainless steel cermets cutters with nano-TiN modifications definitely exhibit better cutting properties and longer tool life in comparison with cemented carbide cutters ( YT15 and YG8 ) and conventional cermets cutter .

  8. 淬硬钢高速铣削参数优化试验研究

    Research on optimization of high speed milling parameters of harden steel

  9. 高速粗铣削加工淬硬钢时刀具路径方案的选择

    Cutter Path Strategies in High Speed Rough Milling of Hardened Steel

  10. 淬硬钢高速铣削表面粗糙度预测模型研究

    Surface Roughness Prediction Model in High Speed Milling of Hardened Steels

  11. 刃口淬硬钢硬度检测的研究

    Study of Hardness Test of the Quenched Steel in Cutting Edge

  12. 陶瓷刀具干式车削淬硬钢试验研究

    Experimental Study on Dry Turning of Hardened Steel with Ceramic Cutters

  13. 风冷条件下淬硬钢切削过程的仿真与试验

    Simulation and Cutting Experiment of Hard Cutting under Air Cooling Cutting

  14. 淬硬钢的高速数控铣削加工策略

    High Speed Numerical Control Milling Strategy with Quench Hardening Steel

  15. 新刀具材料加工淬硬钢的切削性能研究

    Study on Cutting Performance of New Tool Materials for Machining Hardened Steels

  16. 陶瓷刀具干切削淬硬钢的研究

    Study on Dry Cutting of Hardened Steel Using Ceramic Tools

  17. 数控车床精切代磨45淬硬钢的切削

    Study on Finishing 45 Hardened Steel by CNC Lathe

  18. 淬硬钢精车的表面质量和刀具设计

    Surface Quality and Tool Design for Hardened Steel Finishing

  19. 淬硬钢的等离子弧加热切削研究

    A Study on Plasma Heat Machining for Chilled Steel

  20. 端铣淬硬钢时新型陶瓷刀具热破损的强激光模拟

    Strong laser simulation of advanced ceramic tool thermal fracture in milling hardened steel

  21. 淬硬钢超声振动车削试验研究

    Experimental Research of Supersonic Vibration Turning of Tempered Steel

  22. 淬硬钢精切加工方法的理论与应用研究

    Theory and Application of Finishing Turning 45 Hardened Steel

  23. 高速铣削淬硬钢表面粗糙度的试验研究

    Experimental Study on Surface Roughness of HSM Hardened Steel

  24. 非淬硬钢磨削表面硬化层的试验研究

    Experimental Study on Grind-hardened Layer of Non-quenched Steels

  25. 小直径铣刀高速加工淬硬钢研究小直径水力旋流器的研制

    High Speed Machining of Hardened Steel with Micro Endmills Research of small diameter hydro-cyclone

  26. 淬硬钢的高速、高精度硬切削

    High-speed and high-precision hard machining of hardened steel

  27. 高速铣削在淬硬钢模具加工中的应用

    Hard Milling and Its Application in Die Machining

  28. 小直径球头铣刀铣削淬硬钢的试验研究

    Study of Hardened Steel Milling with Micro-Ball-End-Milling Cutter

  29. 用金属陶瓷刀具加工淬硬钢薄壁件切削参数优化

    The Optimization of Cutting Parameters in Turning Thin-walled Workpieces of Hardened Steel Using Cermets Tool

  30. 磨削热导致回火引起淬硬钢磨削后表面硬度变化。

    Tempering resulting from grinding heat caused surface hardness changes of hardened steels after grinding .