横轧

面向楔横轧模具的三维CAD软件

Development of 3D-CAD Software for Design of Cross Rolling Dies

管坯正挤&横轧的成形极限

The forming limit of forward extrusion and cross rolling tube billet

楔横轧模具智能CAD的基本构想

The study toward intelligent CAD system of cross wedge rolling dies

楔横轧模具网络化智能CAD系统的研究与开发

Research and Development of Network Intelligent CAD System for Cross Wedge Rolling Dies

基于特征建模技术的楔横轧模具CAD系统研究

Research on the Cross Wedge Rolling Mould CAD System Based on Feature-Based Modeling Method

本文提出了基于智能方法的楔横轧模具CAD的总体思想，旨在解决模具设计的自动化问题。

In this paper , an idea of toward intelligent CAD system of cross wedge rolling dies is introduced .

基于Delphi的楔横轧模具辅助设计系统

A CAD System of Cross Wedge Rolling Die upon Delphi

首先，对三维CAD技术、基于特征建模技术、参数化技术做了阐述，并将之引入到楔横轧工艺与模具设计中。

Firstly , 3-dimension CAD technology > feature Based modeling technology and parameterization technology are explained respectively , and then introduced them into CWR field .

基于STL的楔横轧模具三维建模系统

The system for 3D-moding of cross wedge rolling die based on STL

基于KBE的楔横轧模具设计关键技术研究

Research of the Key Technology on the KBE-based Cross Wedge Rolling Mould Design

针对楔横轧模具设计特点，基于三维特征参数化技术，提出了基于特征的楔横轧模具CAD方法。介绍了基于特征的楔横轧模具CAD系统结构和设计过程；

To the characteristics of wedge rolling tool design , A method of such based on feature has been presented with introduction to CAD system structure and design process and description on feature , parametrized modeling , feature assembly .

用SEM、TEM等方法研究了一种原始组织为层片状珠光体的高碳钢在多向温变形（楔横轧）和单向温变形（压缩）条件下试样心部与表层显微组织的演变情况。

The microstructure evolution of high carbon steel with lamellar pearlite structure during multi-axis and single-axis warm deformation ( warm cross wedge rolling and warm compression ) was investigated by the use of SEM , TEM etc.

本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。

In this paper , the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished , by using finite element software DEFORM .

将ASP与ActiveX控件技术相结合，采用C/S、B/S混合结构模式，建立了楔横轧模具智能CAD系统的网络体系结构；

The network construction of intelligent CAD system for cross wedge rolling dies was established by combining ASP with the technology of ActiveX component and by using C / S and B / S mixed construction modes .

首先比较了传统的和虚拟的楔横轧模具加工方法，并提出了楔横轧模具虚拟加工系统VMS的体系结构。

In this paper , the traditional and virtual machining approaches of DCWR are compared first . Then , the framework of virtual machining system ( VMS ) of DCWR is discussed .

对基于KBE楔横轧模具设计的知识获取、编码系统、事例推理、重用和改写等关键技术进行重点阐述。

This paper discusses key technology on the KBE-based cross wedge rolling mould design , including knowledge acquisition , coding system , case reasoning , case availability and case modification .

J.T.S法对改善二辊楔横轧轧件心部质量的研究

Study on the quality effect of rolled piece internal part in two rolls cross wedge rolling by J.T.S method

通过对楔横轧的几组工艺参数进行分析，利用DEFORM-3D软件对整个过程建模，对带芯棒轧制的过程进行模拟，并得到了理想的模拟结果。

Analyse several groups of cross wedge rolling process parameters . Then I built a three-dimensional rigid-plastic finite element model by using software DEFORM-3D . By the simulation of rolling process with mandrel , I get the ideal simulation results .

利用三维刚塑性大变形热应力耦合有限元理论研究了楔横轧轧制过程，并在有限元软件Deform-3D平台上，开发建立了楔横轧轧制三维刚塑性热力耦合有限元仿真模型。

The cross wedge rolling ( CWR ) process is studied with the aid of 3-dimension rigid-plastic and coupled thermo-mechanical FEM . On the platform of the general non-linearity FEM software Deform-3D , 3-dimension rigid-plastic and thermo-mechanical finite element model has been established .

另外基于车辆轻量化急需用铝合金代替钢材这一发展趋势，作者将课题确定为基于DEFORM-3D研究楔横轧工艺参数对铝合金空心轴类件的成形规律。

And on basis of trend in lightweight automobile with Aluminum alloy substituting on steel , thus , the topic of this paper is decided as " Research the Deformation Law of Aluminum Hollow Shaft Parts by Cross Wedge Rolling Based on Deform-3D " .

在有限元软件Deform-3D平台上，基于三维刚塑性大变形热/力耦合有限元理论，对一种高碳钢棒件的温楔横轧成形过程进行了数值模拟。

The warm cross wedge rolling process of high carbon steel rod was numerically simulated with the aid of 3-dimension rigid-plastic and coupled thermo-mechanical finite element method ( FEM ), which is based on the platform of general non-linearity finite element method ( FEM ) software Deform-3D .

楔横轧轧件端头凹心影响因素的研究

Study on effect factors of end concavity in cross wedge rolling

楔横轧轧件变形区几何形状的数学模型

The Mathematic Model of Workpiece Deformation Region of Cross Wedge Rolling

汽车半轴楔横轧模具计算机辅助设计

Computer aided design for cross wedge rolling tools of automobile semi-axes

楔横轧轧制时的弹性压扁累积效应

The Accumulating Effect of Elastic Press Flat during Wedge Cross Rolling

大螺距螺旋表面零件楔横轧孔型设计

Groove design for transverse wedge rolling screw with long screw pitch

可移式模具在楔横轧工艺中的应用

The Application of Movable Dies for the Cross Wedge Rolling Process

双直角台阶的楔横轧

The cross wedge rolling of two steps of internal right angles

计算机辅助楔横轧工艺及模具设计

Computer Aided Design of Process and Die for Cross Wedge Rolling

楔横轧轧制汽车变速器第二轴研究

Research the No.2 Shaft of Transmission Case by Cross Wedge Rolling