智能硬件

智能硬件智能硬件
  1. 这家咖啡店是由中国最大的智能硬件创新和创业平台“硬蛋”,以及美国机器人设计公司RethinkRobotics共同打造的,该创意空间提供了无人化服务以及人工智能的其他一些功能。

    The coffee shop , a creative space that offers unmanned services and other functions of AI , was co-built by China 's largest intelligent hardware innovation and start-up platform IngDan and US-based robot design company Rethink Robotics .

  2. 缺失的元素是真正有用的智能硬件&或者确切地说,是有吸引力而又易于使用的消费产品。

    The missing ingredient was a truly useful piece of intelligent hardware .

  3. 缺失的元素是真正有用的智能硬件——或者确切地说,是有吸引力而又易于使用的消费产品。这种产品应该把一系列人们想要的功能用直观的界面包装起来:软件、硬件和在线服务能协同工作,令家居生活更美好。

    The missing ingredient was a truly useful piece of intelligent hardware . Or , to be precise , an appealing , easy-to-use consumer product that bundled a desirable set of capabilities with an intuitive interface : software , hardware and online service working in concert to make life around the home better .

  4. 结合SOPC、嵌入式计算和中间件等先进技术提出了测控网络智能节点硬件实现总体方案及其通信模型。

    This article presented the design of hardware and communication model of the distributed measuring and controlling network intelligent node .

  5. 基于xPC的智能车灯硬件在环仿真系统开发

    Development of Hardware-in-the Loop Simulation for Advanced Front-lighting System Based on xPC Technique

  6. 通过对不同小波函数的对比,根据负载识别的具体特点,选取Dmeyer小波函数,并确定了识别的具体特征值。2、建立了基于DSP的智能电表硬件架构。

    Through the comparison of different wavelet functions , identify the specific characteristics of the load , select the Meyer wavelet function , and to determine the value of the specific characteristics of recognition . 2 、 Established a DSP-based architecture of smart meters .

  7. 宽带接入智能交换机硬件系统的设计和实现

    Design and Implementation of the Hardware System in the Broadband Access Smart Switch

  8. 智能卡硬件发展的关键技术探讨

    The Key Technology of the Smart Card Development

  9. 重点说明了嵌入式智能仪表硬件和软件的设计方法,对系统远程升级的可靠性和保密性进行了论述。

    Hardware and software design methods are stressed ; the reliability and keeping-secret of system remote-upgrade are discussed .

  10. 本文主要论述以太网宽带接入智能交换机硬件系统的设计与实现。

    This paper discusses the design and implementation of the gigabit access smart switch hardware in our broadband access system over Ethernet .

  11. 微软上周四宣布,该公司将从其智能手机硬件、全球销售部门再次裁员,再裁减2850个工作岗位。

    Microsoft is cutting more jobs from its smartphone hardware and global sales divisions by shedding an additional 2850 positions , the company said last Thursday .

  12. 因此设计出一种与智能卡硬件无关,且性能较高的模型对于智能卡的发展以及智能卡的开发都是很重要的事情。

    Therefore , there are very important things to design a smart card system with hardware independent and high performance model for the development of smart cards .

  13. 这场战争以及智能手机硬件和操作系统之间竞争的结果,将决定未来数字世界的模样。

    The outcome of this battle , as much as the clash of smartphone hardware and operating systems , will determine the shape of the digital future .

  14. 针对于不同智能卡硬件资源,当代码存储空间有限时使用静态加载,可以节省存储空间,如果对于系统的移植性能有较一个要求时,可使用驱动动态加载。

    For different smart card hardware resources when code storage space is limited use static loading , can save storage space , and if require for higher system transplantation performance , can use driven dynamic loading .

  15. 该系统由熔焊成型执行机构、焊缝质量智能控制硬件以及相关软件组成,集分层、轨迹规划、堆积成型、焊缝质量控制监测和通讯为一体。

    The system consists of the machine of welding prototyping , quality control hardware and software , which is integrated slicing , planning on deposit trajectory , welding prototyping , quality inspecting and communication . 2 .

  16. 本文从理论入手对智能卡硬件体系结构进行了全面的分析与研究,并总结出各种不同设计方法的优点和缺点,为以后的设计工作提供选择的依据,也为其他研究者提供参考。

    This article discusses the hardware architecture of the smart card in theory and makes a summary of kinds of design methods , list their advantage and disadvantage , to give a reference for design , and to be referenced for other researchers .

  17. 基于DSP的ARINC429嵌入式智能接口板硬件设计与实现

    Design and realization of embeded intelligent interface card of ARINC 429 bus based on DSP

  18. 嵌入式小区智能终端的硬件设计及Linux操作系统移植实现

    Hardware Design of Embedded Intelligent Community Terminal Device and Transplanting Linux OS into Terminal Device

  19. 采用DSP作为处理核心,完成了智能绞车面板硬件的设计。

    It uses DSP as the processor core to design the hardware of intelligent winch control panel .

  20. 从Android的主要特点和整体架构方面,具体的介绍了Android平台,并且对本文中设计开发的可视电话所基于的硬件系统方案进行了介绍,对此款智能手机的硬件设计方案进行了综述。

    And the design of videophone based on hardware system scheme is presented and reviewed in this paper .

  21. 对所研制的GPS模块的作用、接收信息的格式、GPS模块与单片机的通信方法进行了说明,并讨论了GPS智能终端的硬件系统和软件系统的设计方法。

    GPS module working and receiving message and communication for GPS module and Micro-controller is described , and a design of hard system and soft system about GPS terminal is discussed .

  22. 研究了智能分站的硬件和软件结构,详细分析了RS-485总线通讯技术、双端口RAM仲裁技术。

    It studies the intelligent sub-station about its hardware and software structure , detailedly analyses RS-485 bus communication technique and bi-port RAM arbitration technique .

  23. 描述基于GPS,CDMA和WLAN的无线智能调制解调器的硬件及软件的设计与实现,以及相关功能。

    The Paper also describes the wireless intelligence modem hardware and the software design and the realization based on GPS , CDMA and WLAN protocols , as well as related function .

  24. 该系统也能为高清晰度电视加解扰器的ASIC设计和智能卡的硬件设计提供极具价值的参考模型。

    The system can also provide a valuable reference model for the ASIC design of the HDTV scrambler / de scrambler and the hardware design of the smart card .

  25. 给出了实现RS-232接口和RS-485接口的智能转换的硬件电路,采用双光隔提高数据传输速率。

    A hardware circuit for intelligent conversion between RS-232 interface and RS-485 interface is presented . Dual photo couplers are adopted to raise the transfer rate of the data .

  26. 本论文的主要任务是:硬件的选型,包括水阻箱的设计,智能双向仪表硬件设计,传感器选型,VXI数据采集器;

    Hardware design contains the design of water resistance , the choose of sensors , the design of instruments , data acquisition instrument based on VXI .

  27. 最后,给出针对嵌入式网络智能控制终端硬件的uClinux内核的详细修改过程,以及如何在uClinux内核中添加通信程序。

    Finally , details of modification of uClinux kernel which is related to hardware system of embedded network intelligent control terminal and how to append communication programs in the uClinux kernel are presented .

  28. 该设计主要在HART协议的基础上,首先详细的介绍了智能变送器各硬件模块并设计了变送器系统的硬件模块包括微处理系统模块、传感器模块及通信模块、D/A和A/D模块。

    This design mainly in hart agreement on the basis of the transmitter system , the design of hardware modules including micro processing system module , sensor module and communication module , D / A and A / D module .

  29. 可穿戴设备和智能手机的硬件和软件将支持一种叫做近场通讯(即NFC)的技术,设备通过这种技术可以在很短的距离内无线交换信息。

    The wearable device and the smartphones will include hardware and software that support a technology called near-field communication , or NFC , which allows devices to exchange information wirelessly over very short distances .

  30. 软件方面,以嵌入式Linux操作系统为平台,在PC机上建立了一套完整的交叉开发环境,并在该环境下完成了u-boot和uClinux到智能导航终端硬件平台的移植。

    In software , the embedded Linux operating system was used for the platform . A complete cross-development environment was established on the host personal computer . The u-boot and uClinux was ported to the intelligent navigation terminal hardware platform under that environment .